Digital Engineering & Asset Information Management

BC-5060 Level 1 Infrastructure 6 providers 12 API surfaces 3 rated strong or better

Digital engineering and structured asset information across the built-asset lifecycle, spanning building information modelling, the common data environment, 4D and 5D integration, geospatial and survey management, and digital-twin and asset-information management. Turns models and data into a trusted information asset from design through construction and operation.

Digital Engineering & Asset Information Management (BC-5060) is a level-1 business capability in the Infrastructure model. The catalog holds 12 API surface(s) from 6 provider(s) that can perform some part of it, 3 of them rated strong or better. Reach is the vendor surface that lands on this capability — it is not a claim about what any particular organisation has deployed.

Where this capability definition comes from. This capability is part of a published business-architecture model that API Evangelist did not author. It is redistributed here under CC-BY-4.0. Turbo EA Capabilities by Vincent Verdet — Turbo EA, https://github.com/vincentmakes/turbo-ea-capabilities, CC BY 4.0 Changes: Consolidated from 333 per-L1 YAML files into one JSON; English only (upstream i18n/ omitted); descriptions whitespace-normalised. No capability was added, removed, renamed or re-parented. Source repository · NOTICE and third-party framework attributions

Authorities this capability cites

Cited by the capability model itself. These frameworks are referenced, never redistributed, and citing one does not imply its owner endorses this listing.

Sub-capabilities

BIM Management BC-5060.10

Strategy, standards, and coordination of building information modelling across projects and disciplines.

3 providers, 3 API surfaces

Common Data Environment BC-5060.20

Management of the shared information environment and the requirements, control, and exchange of project data.

2 providers, 3 API surfaces

4D & 5D Integration BC-5060.30

Integration of models with programme and cost to support construction sequencing and quantity and cost insight.

no catalog coverage

Geospatial & Survey Management BC-5060.40

Management of geospatial, survey, and ground data underpinning design and construction.

1 provider, 1 API surface

Digital Twin & Asset Data BC-5060.50

Development of asset information models and digital twins fed by operational data for the in-use asset.

1 provider, 4 API surfaces

Providers that reach this capability

Ordered by rating band. Reach means a provider publishes an API surface that can perform some part of this capability — it is not a claim that any particular organisation has deployed it.

Strong 3 Solid coverage with minor gaps

Bentley SystemsReality DataiModels2 APIs62.6 FieldwireBuilding Information ModelsSheets2 APIs58.2 AutodeskElementsModelsStreamsTwins4 APIs57.4

Developing 2 Usable, with meaningful gaps to close

PlanRadarApproval Requests V2DMS2 APIs51.4 TrimbleBCF Topics1 API39.4

Thin 1 Limited public surface area

NewformaIssue1 API36.0

Workflows that realise this capability

Arazzo workflows whose own sourceDescriptions call APIs that carry this capability. The link is derived, not asserted: each workflow declares x-realizes-capability-ids with the spec and confidence behind it.

Autodesk Write Facility Data Back to a Tandem Twin — autodesk · Digital Twin & Asset Data BC-5060.50
Autodesk Push Sensor Readings into a Tandem Stream — autodesk · Digital Twin & Asset Data BC-5060.50
Bentley Clone an iModel and Wait for It — bentley-systems · Digital Engineering & Asset Information Management BC-5060
Bentley Provision an iModel Inside a New iTwin — bentley-systems · Digital Engineering & Asset Information Management BC-5060
Bentley Register Reality Data and Grant Write Access — bentley-systems · Geospatial & Survey Management BC-5060.40

This page carries no rating. Capabilities are not rated. A capability is a description of what a business does, not a thing a company publishes, so a Kin Score would have nothing to measure.

The edge table is a Pro feature. This page shows which providers and tags reach Digital Engineering & Asset Information Management. The underlying tag → capability edges — each with the quoted fragment of the provider's own OpenAPI that evidences it, a calibrated confidence score, and the contract-provenance gate it passed — are available through the API, along with company-level capability maps. Only edges at confidence ≥ 0.7 with evidence found verbatim in the source contract are published at all.

See plans → · How the edges are graded →