Stedi · Controlled Vocabulary

Stedi Vocabulary

Domain vocabulary extracted from Stedi OpenAPI specifications covering EDI, healthcare clearinghouse, claims, eligibility, enrollment, and event management terms.

839 Terms Updated
View Vocabulary File View on GitHub

Stedi Vocabulary is a controlled vocabulary published by Stedi on the APIs.io network, defining 839 terms.

Defined terms include AccessDeniedException, AccessDeniedExceptionResponseContent, AccountNumberQualifier, AdditionalIdentificationDependent, and AdditionalIdentificationSubscriber.

A controlled vocabulary pins the words an API’s schemas, parameters and documentation use to one agreed definition each — the shared language a human or an agent needs to read the API the same way its authors do.

Showing the first 250 of 839 terms. The full vocabulary is in the source file linked above.

Terms

AccessDeniedException
The server response for authorization failure.
AccessDeniedExceptionResponseContent
The server response for authorization failure.
AccountNumberQualifier
Identifies the type of bank account being used for electronic payment transactions. This specifies whether the account is a checking (demand deposit) or savings account.
AdditionalIdentificationDependent
Use this object when you need to provide an additional identification number for the dependent. This is rarely required for standard eligibility checks.
AdditionalIdentificationSubscriber
Use this object when you need to provide an identification number other than or in addition to the subscriber's member ID. For example, you may provide the patient account number. Don't include the health insurance claim number or the medicaid recipient ID number here unless they are different from the member ID.
AdditionalInformation
Schema type from the Stedi healthcare API
Address
Schema type from the Stedi healthcare API
AdjustmentGroupCode
Code identifying the general category of payment adjustment. Can be set to `CO` - Contractual Obligations, `CR` - Correction and Reversals, `OA` - Other Adjustments, `PI` - Payor Initiated Reductions, or `PR - Patient Responsibility.
Adjustments
Provider adjustment details including reason codes and amounts.
AdmittingDiagnosis
Schema type from the Stedi healthcare API
AdmittingDiagnosisQualifierCode
Code identifying the type of admitting diagnosis code used. Can be set to `ABJ` - International Classification of Diseases Clinical Modification (ICD-10-CM) Admitting Diagnosis or `BJ` - International Classification of Diseases Clinical Modification (ICD-9-CM) Admitting Diagnosis. Note that ICD-9 is deprecated and cannot be used in new claims.
AggregationPreference
Preference for how the payer should group 835 Electronic Remittance Advice (ERA) transactions. Only set this property for 835 ERA enrollments. - If you include this property for a non-ERA enrollment, Stedi rejects the enrollment request with an HTTP `400` error. - If the payer doesn't support the requested aggregation type, Stedi rejects the enrollment request with an HTTP `400` error. - If not set, Stedi automatically selects a default based on the payer's supported aggregation types and the available identifiers for the provider. - Stedi will attempt to enroll with this preference, but it's not guaranteed. Each payer has its own restrictions and behaviors.
AllEnrolledProviderFields
Complete provider information including both read-only and mutable fields.
AmbulanceCertification
Required when the claim involves ambulance transport services.
AmbulanceCertificationCertificationConditionIndicator
Code indicating whether there is an ambulance certification.
AmbulanceCertificationConditionCodesItem
Code indicating the condition of the patient at the time of transport. You can provide up to five codes. Visit [Claims code lists](https://www.stedi.com/docs/healthcare/claims-code-lists#ambulance-certification-condition-codes) for a complete list.
AmbulanceTransportInformation
Information about the ambulance service provided to the patient.
AmbulanceTransportReasonCode
Code indicating the reason for ambulance transport. For example, `A` - Patient was transported to nearest facility for care of symptoms, complaints, or both. Visit [Claims code lists](https://www.stedi.com/docs/healthcare/claims-code-lists#ambulance-transport-reason-codes) for a complete list.
ApplicationModes
The type of data in the request. This is either `production` when you send a request with a standard API key or `test` when you send a request in test mode with a [test API key](https://www.stedi.com/docs/api-reference/index#api-key-types). The `information` value is not currently used. Payers may sometimes return other non-compliant values.
Artifact
Schema type from the Stedi core API
ArtifactModel
The model of the artifact, which indicates the type of process or operation it represents. For example, an execution artifact represents a file that was processed, a fragment artifact represents a part of a larger transaction, and a fault artifact represents an error that occurred during processing.
ArtifactType
The format of the artifact.
ArtifactUsage
The type of data the artifact contains. For example, an input artifact represents the original data Stedi received before processing, while an output artifact represents the processed data. For example, for an inbound 835 ERA from a payer, the input artifact would be the original X12 EDI, and the output artifact would be the JSON representation of the ERA.
AssistantSurgeon
Information about the assistant surgeon who rendered the care. Use this object when the rendering providers provided these services in the role of the assistant surgeon. This should be an individual, not an organization, and you should supply at least the surgeon's `lastName`, `taxonomyCode`, and an identifier, which is typically the `npi`.
AttachmentReportTypeCode
Code indicating the title or contents of a document, report or supporting item. For example, `08` - Plan of Treatment or `CT` - Certification. Visit [Claims code lists](https://www.stedi.com/docs/healthcare/claims-code-lists#attachment-report-type-codes) for a complete list.
AttachmentsResponseMetadata
Metadata from Stedi about the request.
Attending
Information about the individual who has overall responsibility for the patient's medical care and treatment reported in the claim. This information is required when the claim contains any services other than non-scheduled transportation claims. This provider should be an individual, not an organization, and you should supply at least the provider's `lastName` and an identifier, which is typically the `npi`.
AuthOrCertIndicator
Code indicating whether the benefit is subject to prior authorization or certification. Payers may sometimes return other non-compliant values.
BadRequestException
The server cannot process the request due to an apparent client error.
BadRequestExceptionResponseContent
The server cannot process the request due to an apparent client error.
BenefitRelatedEntityIdentification
Code identifying the type of value provided in `entityIdentificationValue`. For example, `FI` - Federal Taxpayer's Identification Number. Payers may sometimes return other non-compliant values.
BenefitsAdditionalInformation
Identifying information specific to this type of benefit.
BenefitsDateInformation
Dates associated with the benefits. - This is where you can find benefit-specific eligibility dates, if provided. These dates override dates provided in `planDateInformation` for this benefit type. - This is where the payer may specify the last time the service was rendered (`latestVisitOrConsultation`), which you can use to determine whether the patient has already reached the allowed frequency, if applicable. For example, this object could contain the date when the patient received their last dental cleaning. - These dates only apply to the `benefitsInformation` object in which this `benefitsDateInformation` is provided.
BenefitsInformation
Schema type from the Stedi healthcare API
BenefitsInformationCode
The code indicating the type of benefits information. Visit [Eligibility and benefit codes](https://www.stedi.com/docs/healthcare/eligibility-active-coverage-benefits#benefit-type-codes) for more information. Payers may sometimes return other non-compliant values.
BenefitsInformationCoverageLevelCode
Code indicating the level of coverage for the patient. This will either be `CHD` - Children Only, `DEP` - Dependents Only, `ECH` - Employee and Children, `EMP` - Employee Only, `ESP` - Employee and Spouse, `FAM` - Family, `IND` - Individual, `SPC` - Spouse and Children, `SPO` - Spouse Only, or `Unknown`. Payers may sometimes return other non-compliant values.
BenefitsInformationCoverageLevelName
The full name of the coverage level code. Payers may sometimes return other non-compliant values.
BenefitsInformationName
The full name of the benefits information code. Payers may sometimes return other non-compliant values.
BenefitsRelatedEntity
Identify another entity associated with the eligibility or benefits. This could be a provider, an individual, an organization, or another payer. This array is commonly used to designate the patient's primary care provider (PCP), another organization that handles a specific carveout benefit type, or another health plan for the patient (coordination of benefits scenarios). This is where information for a crossover carrier such as Medicaid or Medicare is provided, if it's applicable to the patient and the payer supports it.
BenefitsRelatedEntityRelationshipCode
Code specifying the relationship between the entity and the patient. Payers may sometimes return other non-compliant values.
BenefitsServiceDelivery
The delivery or usage pattern for the benefits.
BenefitsServiceDeliveryQuantityQualifier
The name of the `quantityQualifierCode`. For example, `Days`. Payers may sometimes return other non-compliant values.
BenefitsServiceDeliveryQuantityQualifierCode
Code specifying the type of quantity. Payers may sometimes return other non-compliant values.
Billing
Information about the billing provider. - You must provide an `address` that is a physical location such as the office where care is delivered or an administrative facility. - For tax identification, you must include either the provider's Social Security Number (SSN) in the `ssn` property _or_ their Employer Identification Number (EIN) in the `employerId` property, but not both. - If the billing provider has an NPI, you must include it in the `npi` property. If the billing provider does not have an NPI, you must include either the `commercialNumber` or the `locationNumber` for identification. Some payers may require the `npi` **and** either the `commercialNumber` or the `locationNumber` as a secondary identifier. - Some solo providers may use their SSN as their EIN. In this case, submit the SSN in the `ssn` property and leave the `employerId` property blank.
BillingProviderType
Defines the billing provider type.
BusinessContactInformation
A person or office to whom administrative communications should be directed.
BusinessIdentifier
Schema type from the Stedi core API
COB
Schema type from the Stedi healthcare API
COBBenefitsDateInformation
Dates associated with the benefits. Dates listed only apply to the `benefitsInformation` object in which this benefitsDateInformation is provided.
COBBenefitsInformation
Schema type from the Stedi healthcare API
COBBenefitsInformationName
The full name of the benefits information code.
COBBenefitsRelatedEntity
Schema type from the Stedi healthcare API
COBDependent
A dependent for which you want to check coordination of benefits. - An individual qualifies as a dependent when they are listed as a dependent on the subscriber's insurance plan AND the payer cannot uniquely identify them through information outside the subscriber's policy. For example, if the dependent has their own member ID number, you should identify them in the `subscriber` object instead. - The demographic information you provide **must** patch the payer's data exactly. For example, if the payer has the dependent's name as `Jonathan Doe`, a COB request for `Jon Doe` will fail because the name doesn't match the payer's records.
COBEncounter
Information about the encounter. - You can submit COB checks with the `30` service type code for Health Benefit Plan Coverage. This is the broadest service type code that covers all medical services and subtypes included in the patient’s health plan. - The service dates you provide **must** be within the past 2 years. COB checks don't support requests with dates outside of this range. - Don't send service dates that are in the future. Future service dates typically result in errors from the payer. - If you don't specify a service date (either a single day or a range of dates), Stedi defaults to using the current date.
COBMetaData
Schema type from the Stedi healthcare API
COBPayer
Schema type from the Stedi healthcare API
COBPlanDateInformation
Dates associated with the patient's health plan coverage. This information is used to determine their eligibility for benefits. - The provided dates apply to every benefit within the patient's health plan unless specifically noted within a `benefitsInformation[].benefitsDateInformation` object. - If the payer sends back date(s) that are different for the subscriber and dependents, Stedi includes only the dates for the dependent in this object and omits the subscriber's date(s). Dependents can have different coverage dates than the subscriber due to qualifying life events, such as starting a new job or passing the age limit for coverage through their parent's plan.
COBProvider
Information about the entity requesting the coverage.
COBResponseBenefitsInformationCode
The code indicating the type of benefits information. Can be `1` - Active Coverage, `6` - Inactive, `R` - Other or Additional Payor, or `V` - Cannot Process.
COBResponseBenefitsInformationSubscriber
Schema type from the Stedi healthcare API
COBResponseDependent
Information about the dependent listed in the original COB request.
COBResponseProvider
Information about the entity that submitted the original eligibility check request. This may be an individual practitioner, a medical group, a hospital, or another type of healthcare provider.
COBResponseServiceTypeCode
Code identifying the type of services included in a `benefitsInformation` object.
COBResponseServiceTypeCodeName
The names of the `benefitsInformation[].serviceTypeCodes` included in the response.
COBResponseSubscriber
Information about the primary policyholder for the insurance plan listed in the COB request.
COBServiceTypeCode
The service type code for the encounter. If not provided, the default value is `30`.
COBSubscriber
The primary policyholder for the insurance plan _or_ a dependent with a unique member ID. If a dependent has a unique member ID, include their information here and leave `dependent` empty. The demographic information you provide **must** match the payer's data exactly. For example, if the payer has the subscriber's name as `Jonathan Doe`, a COB request for `Jon Doe` will fail because the name doesn't match the payer's records. Also note that: - Any prefix on the member's card is considered part of the `memberID` used for the search. - Mismatches in the `memberId` are one of the most common causes of `Member Not Found` errors. We strongly recommend first performing an [Eligibility Check](https://www.stedi.com/docs/healthcare/api-reference/post-healthcare-eligibility) and using the `memberId` in the response to populate your COB check. - We recommend including the `ssn` property in addition to the `memberId` if possible. This allows Stedi to do an additional search for the patient when the `memberId` doesn't return a match. - Stedi can identify coverage overlap for the same payer if the member ID differs between the two coverages.
CertificationConditionCodeAppliesIndicator
Code indicating whether an EPSDT referral was given to the patient. Can be set to `N` - No or `Y` - Yes.
CertificationTypeCode
Code indicating the type of certification. Can be set to `I` - Initial, `R` - Renewal, or `S` - Revised.
Claim
Information about the claim and its status.
ClaimAcknowledgmentDetails
Schema type from the Stedi healthcare API
ClaimAcknowledgmentDetailsServiceProvider
Information about the service provider.
ClaimAcknowledgmentPayer
Schema type from the Stedi healthcare API
ClaimAcknowledgmentServiceIdQualifierCode
Code identifying the source of the procedure code in claim status reports.
ClaimAcknowledgmentServiceIdQualifierCodeValue
Human-readable descriptions for service ID qualifier codes.
ClaimAcknowledgmentServiceLines
Schema type from the Stedi healthcare API
ClaimAcknowledgmentServiceLinesService
Information about the service provided.
ClaimAcknowledgmentTransactions
Schema type from the Stedi healthcare API
ClaimAcknowledgmentTransactionsProvider
Information about the provider receiving the claim status details.
ClaimAdjustment
Schema type from the Stedi healthcare API
ClaimAdjustmentDetails
The adjustment reason codes and amounts. You can include up to six objects in this array to describe a single adjustment group code.
ClaimAdjustmentGroupCode
Defines the category of adjustment reason codes that explain why a claim payment was adjusted. These codes categorize adjustments into contractual obligations, payer-initiated reductions, patient responsibilities, and other adjustments.
ClaimAdjustments
Claim-level adjustments with reason codes and amounts.
ClaimAttachmentReference
Information about the claim attachment.
ClaimCodeInformation
Supply information specific to hospital claims, such as the priority of the admission.
ClaimContractInformation
Required when the submitter is contractually obligated to supply this information on post-adjudicated claims.
ClaimContractInformationContractTypeCode
A code identifying the type of contract. Can be set to `01` - Diagnosis Related Group (DRG), `02` - Per Diem, `03` - Variable Per Diem, `04` - Flat, `05` - Capitated, `06` - Percent, or `09` - Other.
ClaimDateInformation
You must provide at least one date related to the claim. For example, the date on which the patient was admitted to the hospital.
ClaimFilingCode
A code identifying the type of claim. For example `DS` - Disability. - Use `OF` when submitting Medicare Part D claims. - Use `ZZ` when you don't know the type of insurance. - Some payers reject claims with invalid codes. If you're not sure which code to use, we recommend running a [real-time eligibility check](https://www.stedi.com/docs/healthcare/api-reference/post-healthcare-eligibility) and using the value returned in the most relevant `benefitsInformation.insuranceTypeCode` property. Note that the eligibility response uses a different code list than claims, so you may need to map that code value to the appropriate claim filing code. Visit [Claims code lists](https://www.stedi.com/docs/healthcare/claims-code-lists#claim-filing-indicator-codes) for a complete list.
ClaimFilingIndicatorCode
A code identifying the type of claim. For example `DS` - Disability. Use `OF` when submitting Medicare Part D claims. Use `ZZ` when you don't know the type of insurance. Visit [Claims code lists](https://www.stedi.com/docs/healthcare/claims-code-lists#claim-filing-indicator-codes) for a complete list.
ClaimFrequencyCode
Identify the type of claim. Can be set to: `1` - indicates an original claim, `7` - Indicates the new claim is a replacement or correction, `8` - Indicates the claim is void or canceled
ClaimIdentifier
A code specifying the type of transaction. Defaults to `CH` if not provided. - `31`: Only for use by state Medicaid agencies performing post payment recovery. - `CH`: Use when the transaction contains only fee for service claims or claims with at least one chargeable line item. Also use when it's not clear whether a transaction contains claims or capitated encounters, or if the transaction contains a mix of claims and capitated encounters. - `RP`: Use for capitated encounters. Also use when the transaction is being sent to an entity for purposes other than adjudication of a claim. For example, when you're sending the claim to a state health agency that is using the claim for health data reporting purposes.
ClaimInformation
Information about the healthcare claim. Note that the objects and properties marked as **required** are required for all claims, while others are conditionally required, depending on type of claim and claim circumstances. For example, you must always provide the patient's diagnosis codes in the `healthCareCodeInformation` object, but you only need to provide the `otherSubscriberInformation` object in coordination of benefits scenarios. When you include a conditionally required object, you must provide all of its required properties.
ClaimInformationBenefitsAssignmentCertificationIndicator
A code indicating whether the patient or an authorized person has authorized the plan to remit payment directly to the provider. Use `W` when the patient refuses to assign benefits. Can be set to `N` - No (Payment should go to the patient), `Y` - Yes (Payment should go directly to the provider), or `W` - Not Applicable (use when patient refuses to assign benefits).
ClaimInformationConditionCodesItem
Schema type from the Stedi healthcare API
ClaimInformationRelatedCausesCodeItem
Code identifying an accompanying cause of an illness, injury or an accident. Can be set to `AA` - Auto Accident, `EM` - Employment, or `OA` - Other Accident.
ClaimLevelEntityIdentifierCode
Entity identifier code for claim level in claim status reports
ClaimLevelEntityIdentifierCodeValue
Human-readable descriptions for claim level entity identifier codes
ClaimLevelStatus
Schema type from the Stedi healthcare API
ClaimNote
Comments or special instructions related to the claim. Contains information required to substantiate the medical treatment that isn't provided elsewhere in the claim.
ClaimNotes
Free-form information to substantiate the medical treatment that isn't provided elsewhere in the claim submission. Also used to provide narrative information from the forms Home Health Certification and Plan of Treatment or Medical Update and Patient Information, as needed to substantiate home health services. You can provide up to 10 strings in this array.
ClaimPaymentAdviceFilingIndicatorCode
Identifies the type of health plan or insurance coverage under which the claim was filed. These codes indicate the specific type of insurance arrangement, government program, or coverage type that applies to the claim.
ClaimPaymentAdvicePayer
Information about the payer.
ClaimPaymentAdvicePayerAddress
Address information for the payer.
ClaimPaymentAdviceResponse
The complete claim payment advice response from the payer.
ClaimPaymentAdviceResponseFinancialInformation
Information about a payment, including the payment method, payment amount, and account details for both the sender and receiver.
ClaimPaymentAdviceResponsePaymentAndRemitReassociationDetails
Information to uniquely identify the transaction and help with reassociating payments and remittances that have been separated.
ClaimPaymentAdviceServiceLines
Information about specific service lines in the claim payment advice.
ClaimPaymentAdviceServiceLinesRenderingProviderInformation
Identifiers for the provider who rendered this service.
ClaimPaymentAdviceServiceLinesServiceIdentification
Additional identifiers related to the service line.
ClaimPaymentAdviceServiceLinesServicePaymentInformation
Payment and control information about a provider for a particular service.
ClaimPaymentAdviceServiceLinesServiceSupplementalAmounts
Information about the service supplemental amount. All values are expressed as decimals.
ClaimPaymentAdviceServiceLinesServiceSupplementalQuantities
Additional quantity information about the service. All values are expressed as decimals.
ClaimPaymentEnrollmentProcess
Details about the enrollment process for Electronic Remittance Advice (ERAs).
ClaimPricingInformation
Schema type from the Stedi healthcare API
ClaimPricingInformationProductOrServiceIDQualifier
Code identifying the type of product or service ID used. Can be set to `ER` - Jurisdiction Specific Procedure and Supply Codes, `HC` - Health Care Financing Administration Common Procedural Coding System (HCPCS) Codes, `HP` - Health Insurance Prospective Payment System (HIPPS) Skilled Nursing Facility Rate Code, `IV` - Home Infusion EDI Coalition (HIEC) Product/Service Code, or `WK` - Advanced Billing Concepts (ABC) Codes. Note that ABC codes are deprecated and should not be used in new claims. If you provide this property, you must also provide `repricedApprovedHCPCSCode` Visit [Claims code lists](https://www.stedi.com/docs/healthcare/claims-code-lists#product-or-service-id-qualifier-codes) for a complete list and additional usage notes.
ClaimPricingRepricingInformation
Repricing information to be completed by repricers, not providers. For capitated encounters, pricing or repricing information usually is not applicable and is provided to qualify other information within the claim.
ClaimReference
Information about the claim.
ClaimServiceFacilityLocation
Required when the location for the service is different from the billing provider's address. The purpose of this object is to identify specifically where the service was rendered. This can be healthcare facilities, such as surgical centers or reference labs, OR the patient's address when services were rendered in their home. - Only include this object when the service facility location is **different** from the billing provider's address. If you include this object when the address is the same, Stedi omits all of the service facility location information from the claim submission, including the name and any identifiers. - For telehealth services, the service facility location is the provider's address, even though the patient may have been in their home or elsewhere when receiving services. - Don't use this object when reporting ambulance services - use `ambulancePickupLocation` and `ambulanceDropoffLocation` instead. - Sometimes the billing provider is an actual physician group that is located at the same address as a hospital, but is in fact a separate entity. In this case, you can differentiate the service facility location by including the specific suite or building number of the physician group. This ensures that the service facility location is different from the billing provider's address and is reported accurately.
ClaimServiceFacilityLocationSecondaryIdentifierItem
Schema type from the Stedi healthcare API
ClaimStatusCode
Indicates the status of the claim after adjudication by the payer. These codes determine whether the claim was processed as primary, secondary, tertiary, denied, forwarded to other payers, or represents special processing situations like reversals or predeterminations.
ClaimStatusContactInformation
Schema type from the Stedi healthcare API
ClaimStatusEncounter
Information about the referenced claim or claims for which you want to retrieve status information. - We recommend supplying a date range that is at least plus or minus 7 days from the date of the services listed in the claim, using the `beginningDateOfService` and `endDateOfService` properties. The payer may have stored a different date for the encounter than the one in your records, so providing a date range increases the likelihood that the payer will find a match. - Don't submit future dates - only submit date ranges up to and including today's date. Some payers reject requests containing future service dates.
ClaimStatusInquiryEnrollmentProcess
Details about the enrollment process for real-time claim status requests.
ClaimStatusPayer
Information about the payer listed in the referenced claim.
ClaimStatusProviderType
Identifies the type of provider related to the referenced healthcare claim.
ClaimStatusRawX12RequestContent
Schema type from the Stedi healthcare API
ClaimStatusRawX12ResponseContent
Schema type from the Stedi healthcare API
ClaimStatusRequestContent
Schema type from the Stedi healthcare API
ClaimStatusResponseContent
Schema type from the Stedi healthcare API
ClaimStatusResponseMeta
Metadata about the response.
ClaimStatusSubscriber
Information about the subscriber listed in the referenced claim. - You must set both the `dateOfBirth` and `gender` properties when the subscriber is the patient unless the gender is unknown. Stedi determines that the subscriber is the patient when the `dependent` object is not included in the request. - If either `dateOfBirth` or `gender` is set, you must include both properties unless the gender is unknown.
ClaimStatusSubscriberGender
A code indicating the subscriber's gender. If the claim set the subscriber's gender to `U` for unknown, you should omit this property from the claim status request.
ClaimSupplementalInformation
Additional information or documentation required for the claim. This is where you can include information about [attachments](https://www.stedi.com/docs/healthcare/submit-claim-attachments), if applicable.
ClaimsAddress
Schema type from the Stedi healthcare API
ClaimsClaimStatus
Schema type from the Stedi healthcare API
ClaimsContactInformation
You must include at least one communication method (phone, fax, or email) in this object.
ClaimsDiagnosisTypeCode
Code indicating the specific industry code list. Can be set to `ABK` - International Classification of Diseases Clinical Modification (ICD-10-CM) Principal Diagnosis or `ABF` - International Classification of Diseases Clinical Modification (ICD-10-CM) Diagnosis.
ClaimsError
Schema type from the Stedi healthcare API
ClaimsExceptionCode
Code specifying the exception reason for consideration of out-of-network health care services. This is the reason generated by the third-party health organization. Visit [Claims code lists](https://www.stedi.com/docs/healthcare/claims-code-lists#exception-codes-2) for a complete list.
ClaimsHealthCareInformation
Schema type from the Stedi healthcare API
ClaimsIndividualRelationshipCode
Code identifying the relationship to the person insured. Visit [Claims code lists](https://www.stedi.com/docs/healthcare/claims-code-lists#individual-relationship-codes) for a complete list.
ClaimsPayer
Information about the payer for the submitted claim.
ClaimsProvider
The entity responsible for overseeing the rendering provider and the care reported in this claim. Applies when the rendering provider is supervised by a physician. Use when the provider applies to the entire claim, not just a specific service line. This should be an individual, not an organization, and you should supply at least the provider's `lastName` and an identifier, which is typically the `npi`.
ClaimsRawX12SubmissionRequestContent
Schema type from the Stedi healthcare API
ClaimsRawX12SubmissionResponseContent
Schema type from the Stedi healthcare API
ClaimsServiceLineReferringProvider
Schema type from the Stedi healthcare API
ClaimsServiceLineRenderingProvider
Schema type from the Stedi healthcare API
ClaimsServiceLineSupervisingProvider
Schema type from the Stedi healthcare API
ClaimsSubmissionRequestContent
Schema type from the Stedi healthcare API
ClaimsSubmissionResponseContent
Schema type from the Stedi healthcare API
ClaimsWarning
Warnings indicate issues that may cause some payers to reject the claim. Stedi doesn’t reject claims with warnings only - a response with warnings but no errors means Stedi still submitted the claim. If you receive warnings, we recommend closely monitoring 277CA responses from the payer for rejections. If the claim is rejected, we recommend fixing the issues identified in the warnings before resubmitting.
CodeCategory
Identifies the category to which the `conditionCode` applies. Can be set to `E1` - Spectacle Lenses, `E2` - Contact Lenses, or `E3` - Spectacle Frames.
CodeListQualifierCode
Payers may sometimes return other non-compliant values.
CommunicationMode
Payers may sometimes return other non-compliant values.
ComponentsSchemasClaimStatus
The status, required action, and paid information of a claim or service line.
CompositeDiagnosisCodePointers
Diagnosis code pointers in order of importance to this service line. These pointers are an index to the ICD-10-CM codes you included in the `claimInformation.healthCareCodeInformation` object array. The pointer values can be from 1 to 12 (integer numbers). - You **must** set at least one pointer for the primary diagnosis. Then, you can add up to three additional pointers (up to four in total). - The number of pointers cannot exceed the number of diagnosis codes in the `claimInformation.healthCareCodeInformation` object array. For example, if you only supplied one diagnosis code, then the only valid pointer value is 1. - Don't put ICD-10-CM codes here - they belong in `claimInformation.healthCareCodeInformation`.
CompositeMedicalProcedureIdentifier
Identifies relevant medical procedures by their standard codes and modifiers (if applicable).
ConditionIndicator
Code indicating the condition of the certificate. Can be set to `38` - Certification signed by the physician is on file at the supplier's office or `ZV` - Replacement Item.
ConditionIndicatorCode
A second code indicating the condition of the certificate. Can be set to `38` - Certification signed by the physician is on file at the supplier's office or `ZV` - Replacement Item.
ConditionIndicatorDurableMedicalEquipment
Required when a Durable Medical Equipment Regional Carrier Certificate of Medical Necessity (DMERC CMN) or a DMERC Information Form (DIF), or Oxygen Therapy Certification is included on this service line and the information is necessary for adjudication.
ConditionIndicatorDurableMedicalEquipmentCertificationConditionIndicator
Code indicating whether there is a certification. Can be set to `N` - No or `Y` - Yes.
ConditionInformation
HI
Confidence
Schema type from the Stedi healthcare API
ConfidenceLevel
Schema type from the Stedi healthcare API
ConflictExceptionResponseContent
Exception returned when a resource conflict is detected, such as a duplicate submission already in progress.
ContactInformation
Schema type from the Stedi healthcare API
ContactInformationOrderingProvider
Schema type from the Stedi healthcare API
ContactInformationSubscriberDependent
Only use this object for payer administrative contacts on property and casualty claims. Otherwise, you shoudn't include contact information here. If you include this object, you must supply at least one communication method (phone, fax, or email).
ContactMethod
Schema type from the Stedi healthcare API
ContactMethods
Schema type from the Stedi healthcare API
Contacts
Contacts
ContentType
Allowed content types for claim attachments.
ContractInformation
Required when the submitter is contractually obligated to supply this information on post-adjudicated claims.
ContractInformationContractTypeCode
Code indicating the type of contract. Can be set to `01` - Diagnosis Related Group (DRG), `02` - Per Diem, `03` - Variable Per Diem, `04` - Flat, `05` - Capitated, `06` - Percent, or `09` - Other.
ConvertReport277ResponseContent
Schema type from the Stedi healthcare API
ConvertReport835ResponseContent
Transaction response structure for claim payment advice.
CoordinationOfBenefits400ErrorResponseContent
Schema type from the Stedi healthcare API
CoordinationOfBenefitsEnrollmentProcess
Details about the enrollment process for coordination of benefits (COB) checks.
CoordinationOfBenefitsRequestContent
Schema type from the Stedi healthcare API
CoordinationOfBenefitsResponseContent
Schema type from the Stedi healthcare API
CopayStatusCode
Code indicating whether co-payment requirements were met. Can be set to `O` - Copay exempt.
CoreCharacterSet
When generating EDI, the character set determines the set of characters allowed in the EDI message. Characters outside of the specified set (after applying any repairs specified in RepairOptions) will result in an error.
CoreConnectionType
The type of connection used for file delivery.
CorrectedPriorityPayer
Information about the corrected priority payer. Used when the current payer believes that another payer has priority for making a payment and the claim is not being automatically transferred to that payer.
CoverageType
The types of insurance coverage that a payer can provide. Used to indicate whether a payer supports transactions for medical coverage, dental coverage, vision coverage, or a combination of these.
CreateClaimAttachmentFileRequestContent
Request a pre-signed URL to upload a claim attachment file.
CreateClaimAttachmentFileResponseContent
Receive the attachment ID and upload URL.
CreateEnrollmentDocumentDownloadResponseContent
Response containing the document ID and pre-signed URL for download.
CreateEnrollmentDocumentUploadRequestContent
Input for CreateDocumentUpload.
CreateEnrollmentDocumentUploadResponseContent
Response containing the enrollment ID, document ID, and pre-signed URL.
CreateEnrollmentRequestContent
Input for CreateEnrollment.
CreateEnrollmentResponseContent
Output containing the created enrollment details.
CreateOutboundFragmentRequestContent
Schema type from the Stedi core API
CreateOutboundFragmentResponseContent
Schema type from the Stedi core API
CreatePartnershipOutboundTransactionRequestContent
Schema type from the Stedi core API
CreatePartnershipOutboundTransactionResponseContent
Schema type from the Stedi core API
CreateProviderRequestContent
Information about the provider you want to add to your account. The provider **must** have a unique NPI from other providers in your account.
CreateProviderResponseContent
Output containing the created provider details.
CreateTransactionGroupRequestContent
Schema type from the Stedi core API
CreateTransactionGroupResponseContent
Schema type from the Stedi core API
CreditDebitFlagCode
Indicates whether a financial transaction represents a credit or debit to the provider's account. Used to specify the direction of money flow in payment transactions.
CrossoverCarrier
Information about the crossover carrier. The crossover carrier is defined as any payer to which the claim is transferred for further payment after the current payer has finalized it.
DateTimePeriodFormatQualifier
Payers may sometimes return other non-compliant values.
DelayReasonCode
Code indicating the reason for the delay in claim submission. Visit [Claims code lists](https://www.stedi.com/docs/healthcare/claims-code-lists#delay-reason-codes) for a complete list.
DeliveryOrCalendarPatternQualifier
The name of the `deliveryOrCalendarPatternCode`. For example, `Last Working Day of Period`. Payers may sometimes return other non-compliant values.
DeliveryOrCalendarPatternQualifierCode
Code that specifies the routine shipments, deliveries, or calendar pattern. For example `9` - Last Working Day of Period. Visit [Eligibility code lists](https://www.stedi.com/docs/healthcare/eligibility-code-lists#delivery-frequency-codes) for a complete list. Payers may sometimes return other non-compliant values.
DeliveryPatternTimeQualifier
The name of the `deliveryPatternTimeCode`. Payers may sometimes return other non-compliant values.
DeliveryPatternTimeQualifierCode
A code specifying the time for routine shipments or deliveries. Payers may sometimes return other non-compliant values.
DeliveryReport
Schema type from the Stedi core API
DeliveryReportMetadata
Metadata about the file delivery.
DeliveryReportStatus
Schema type from the Stedi core API
DentalAttachmentReportTypeCode
Code indicating the title or contents of a document, report or supporting item. For example, `B4` - Referral Form or `DA` - Dental Models. Visit [Claims code lists](https://www.stedi.com/docs/healthcare/claims-code-lists#attachment-report-type-codes) for a complete list.
DentalClaimContractInformation
Required when the submitter is contractually obligated to supply this information on post-adjudicated claims.
DentalClaimDateInformation
Schema type from the Stedi healthcare API
DentalClaimEnrollmentProcess
Details about the enrollment process for dental claim submission.
DentalClaimInformation
Schema type from the Stedi healthcare API
DentalClaimSupplementalInformation
Additional information or documentation required for the claim. This is where you can include information about [attachments](https://www.stedi.com/docs/healthcare/submit-claim-attachments), if applicable.
DentalClaimsRawX12SubmissionRequestContent
Schema type from the Stedi healthcare API
DentalClaimsRawX12SubmissionResponseContent
Schema type from the Stedi healthcare API
DentalClaimsSubmissionRequestContent
Schema type from the Stedi healthcare API
DentalClaimsSubmissionResponseContent
Schema type from the Stedi healthcare API
DentalContractInformation
Required when the submitter is contractually obligated to supply this information on post-adjudicated claims.
DentalContractInformationContractTypeCode
Code indicating the type of contract. Can be set to `02` - Per Diem, `03` - Variable Per Diem, `04` - Flat, `05` - Capitated, `06` - Percent, or `09` - Other.
DentalContractTypeCode
A code identifying the type of contract. Can be set to `02` - Per Diem, `03` - Variable Per Diem, `04` - Flat, `05` - Capitated, `06` - Percent, or `09` - Other.
DentalDependent
Dependent who received the medical care associated with the claim. - If the dependent has their own member ID for the health plan, you should include the dependent's information in the `subscriber` object instead. To check whether a dependent has a member ID, submit an [Eligibility Check](https://www.stedi.com/docs/healthcare/api-reference/post-healthcare-eligibility) to the payer. The payer returns the dependent's member ID in the `dependents.memberId` property in the response, if present. - You must include `address` in this object when the patient is a dependent.
DentalDiagnosisTypeCode
Code indicating the specific industry code list. Can be set to `ABK` - International Classification of Diseases Clinical Modification (ICD-10-CM) Principal Diagnosis or `ABF` - International Classification of Diseases Clinical Modification (ICD-10-CM) Diagnosis, `TQ` Systemized Nomenclature of Dentistry (SNODENT).
DentalHealthCareInformation
Schema type from the Stedi healthcare API
DentalLineAdjudicationInformation
Includes service line adjudication information for coordination of benefits between the initial payers of a health care claim and all subsequent payers.
DentalLineAdjudicationInformationServiceIdQualifier
Schema type from the Stedi healthcare API
DentalMeasurementUnitCode
Schema type from the Stedi healthcare API
DentalMedicareOutpatientAdjudication
Claim-level data related to the adjudication of Medicare claims not related to an inpatient setting. Required when outpatient adjudication information is reported in the remittance advice _or_ when you need to report remark codes.
DentalOtherPayerName
Details about the other payer.
DentalOtherSubscriberInformation
Schema type from the Stedi healthcare API
DentalOtherSubscriberName
The person or entity who is the primary policyholder for the other payer's health plan.
DentalPlanParticipationCode
Schema type from the Stedi healthcare API
DentalReportInformation
Schema type from the Stedi healthcare API
DentalService
Schema type from the Stedi healthcare API
DentalServiceIdQualifier
Schema type from the Stedi healthcare API
DentalServiceLine
Schema type from the Stedi healthcare API
DentalServiceLineAssistantSurgeon
Schema type from the Stedi healthcare API
DentalServiceLineDateInformation
Identify specific dates related to the service rendered.
DentalServiceLinePricingRepricingInformation
Repricing information about the line item. This information is completed by repricers, not providers. For capitated encounters, pricing or repricing information usually is not applicable and is provided to qualify other information within the claim.
DentalServiceLineReferenceInformation
Additional identifiers for the service line.
DentalServiceLineRenderingProvider
Schema type from the Stedi healthcare API
DentalServiceLineServiceFacilityLocation
Schema type from the Stedi healthcare API
DentalServiceLineSupervisingProvider
Schema type from the Stedi healthcare API
DentalSpecialProgramCode
Code indicating the Special Program under which the services rendered to the patient were performed. Used for Medicaid claims only. Can be set to `01` - Early & Periodic Screening, Diagnosis and Treatment (EPSDT) or Child Assessment Program (CHAP), `02` - Physically Handicapped Children's Program, `03` - Special Federal Funding, or `05` - Disability. Codes `02`, `03`, and `05` are used for Medicaid claims only.
DentalSubscriber
The person or entity who is the primary policyholder for the health plan _or_ a dependent with their own member ID. - When a dependent has a unique, payer-assigned member ID, treat them as the `subscriber` for the claim submission - include their information here and omit the `dependent` object from the request. Note that the subscriber can be an individual or a business entity. Stedi treats the subscriber as an individual when the request doesn't contain a value for the `subscriber.organizationName` property. - You must set the `dateOfBirth` and `gender` properties when the subscriber is the patient. Stedi determines that the subscriber is the patient when the `dependent` object is not included in the request. - If either `dateOfBirth` or `gender` is set, you must include both properties. You can either include both properties or neither within a single request. - You must include `address` in this object when the patient is the subscriber. If the patient is a dependent, include address information in the `dependent` object instead.
Dependent
Dependent who received the medical care associated with the claim. - If the dependent has their own member ID for the health plan, you should include the dependent's information in the `subscriber` object instead. To check whether a dependent has a member ID, submit an [Eligibility Check](https://www.stedi.com/docs/healthcare/api-reference/post-healthcare-eligibility) to the payer. The payer returns the dependent's member ID in the `dependents.memberId` property in the response, if present. - You must include `address` in this object when the patient is a dependent.

Controlled Vocabulary

Raw ↑
name: Stedi Vocabulary
description: Domain vocabulary extracted from Stedi OpenAPI specifications covering
  EDI, healthcare clearinghouse, claims, eligibility, enrollment, and event management
  terms.
url: https://www.stedi.com/docs
version: 1.0.0
created: '2026-06-12'
tags: []
terms:
- name: AccessDeniedException
  description: The server response for authorization failure.
  source: healthcare
  type: object
- name: AccessDeniedExceptionResponseContent
  description: The server response for authorization failure.
  source: core
  type: object
- name: AccountNumberQualifier
  description: Identifies the type of bank account being used for electronic payment
    transactions. This specifies whether the account is a checking (demand deposit)
    or savings account.
  source: healthcare
  type: string
- name: AdditionalIdentificationDependent
  description: Use this object when you need to provide an additional identification
    number for the dependent. This is rarely required for standard eligibility checks.
  source: healthcare
  type: object
- name: AdditionalIdentificationSubscriber
  description: 'Use this object when you need to provide an identification number
    other than or in addition to the subscriber''s member ID. For example, you may
    provide the patient account number.


    Don''t include the health insurance claim number or the medicaid recipient ID
    number here unless they are different from the member ID.'
  source: healthcare
  type: object
- name: AdditionalInformation
  description: Schema type from the Stedi healthcare API
  source: healthcare
  type: object
- name: Address
  description: Schema type from the Stedi healthcare API
  source: healthcare
  type: object
- name: AdjustmentGroupCode
  description: Code identifying the general category of payment adjustment. Can be
    set to `CO` - Contractual Obligations, `CR` - Correction and Reversals, `OA` -
    Other Adjustments, `PI` - Payor Initiated Reductions, or `PR - Patient Responsibility.
  source: healthcare
  type: string
- name: Adjustments
  description: Provider adjustment details including reason codes and amounts.
  source: healthcare
  type: object
- name: AdmittingDiagnosis
  description: Schema type from the Stedi healthcare API
  source: healthcare
  type: object
- name: AdmittingDiagnosisQualifierCode
  description: Code identifying the type of admitting diagnosis code used. Can be
    set to `ABJ` - International Classification of Diseases Clinical Modification
    (ICD-10-CM) Admitting Diagnosis or `BJ` - International Classification of Diseases
    Clinical Modification (ICD-9-CM) Admitting Diagnosis. Note that ICD-9 is deprecated
    and cannot be used in new claims.
  source: healthcare
  type: string
- name: AggregationPreference
  description: "Preference for how the payer should group 835 Electronic Remittance\
    \ Advice (ERA) transactions. Only set this property for 835 ERA enrollments.\n\
    \  - If you include this property for a non-ERA enrollment, Stedi rejects the\
    \ enrollment request with an HTTP `400` error.\n  - If the payer doesn't support\
    \ the requested aggregation type, Stedi rejects the enrollment request with an\
    \ HTTP `400` error.\n  - If not set, Stedi automatically selects a default based\
    \ on the payer's supported aggregation types and the available identifiers for\
    \ the provider.\n  - Stedi will attempt to enroll with this preference, but it's\
    \ not guaranteed. Each payer has its own restrictions and behaviors."
  source: enrollment
  type: object
- name: AllEnrolledProviderFields
  description: Complete provider information including both read-only and mutable
    fields.
  source: enrollment
  type: object
- name: AmbulanceCertification
  description: Required when the claim involves ambulance transport services.
  source: healthcare
  type: object
- name: AmbulanceCertificationCertificationConditionIndicator
  description: Code indicating whether there is an ambulance certification.
  source: healthcare
  type: string
- name: AmbulanceCertificationConditionCodesItem
  description: Code indicating the condition of the patient at the time of transport.
    You can provide up to five codes. Visit [Claims code lists](https://www.stedi.com/docs/healthcare/claims-code-lists#ambulance-certification-condition-codes)
    for a complete list.
  source: healthcare
  type: string
- name: AmbulanceTransportInformation
  description: Information about the ambulance service provided to the patient.
  source: healthcare
  type: object
- name: AmbulanceTransportReasonCode
  description: Code indicating the reason for ambulance transport. For example, `A`
    - Patient was transported to nearest facility for care of symptoms, complaints,
    or both. Visit [Claims code lists](https://www.stedi.com/docs/healthcare/claims-code-lists#ambulance-transport-reason-codes)
    for a complete list.
  source: healthcare
  type: string
- name: ApplicationModes
  description: 'The type of data in the request. This is either `production` when
    you send a request with a standard API key or `test` when you send a request in
    test mode with a [test API key](https://www.stedi.com/docs/api-reference/index#api-key-types).
    The `information` value is not currently used.


    Payers may sometimes return other non-compliant values.'
  source: healthcare
  type: string
- name: Artifact
  description: Schema type from the Stedi core API
  source: core
  type: object
- name: ArtifactModel
  description: The model of the artifact, which indicates the type of process or operation
    it represents. For example, an execution artifact represents a file that was processed,
    a fragment artifact represents a part of a larger transaction, and a fault artifact
    represents an error that occurred during processing.
  source: core
  type: string
- name: ArtifactType
  description: The format of the artifact.
  source: core
  type: string
- name: ArtifactUsage
  description: 'The type of data the artifact contains. For example, an input artifact
    represents the original data Stedi received before processing, while an output
    artifact represents the processed data.


    For example, for an inbound 835 ERA from a payer, the input artifact would be
    the original X12 EDI, and the output artifact would be the JSON representation
    of the ERA.'
  source: core
  type: string
- name: AssistantSurgeon
  description: 'Information about the assistant surgeon who rendered the care. Use
    this object when the rendering providers provided these services in the role of
    the assistant surgeon.


    This should be an individual, not an organization, and you should supply at least
    the surgeon''s `lastName`, `taxonomyCode`, and an identifier, which is typically
    the `npi`.'
  source: healthcare
  type: object
- name: AttachmentReportTypeCode
  description: Code indicating the title or contents of a document, report or supporting
    item. For example, `08` - Plan of Treatment or `CT` - Certification. Visit [Claims
    code lists](https://www.stedi.com/docs/healthcare/claims-code-lists#attachment-report-type-codes)
    for a complete list.
  source: healthcare
  type: string
- name: AttachmentsResponseMetadata
  description: Metadata from Stedi about the request.
  source: claims
  type: object
- name: Attending
  description: 'Information about the individual who has overall responsibility for
    the patient''s medical care and treatment reported in the claim. This information
    is required when the claim contains any services other than non-scheduled transportation
    claims.


    This provider should be an individual, not an organization, and you should supply
    at least the provider''s `lastName` and an identifier, which is typically the
    `npi`.'
  source: healthcare
  type: object
- name: AuthOrCertIndicator
  description: 'Code indicating whether the benefit is subject to prior authorization
    or certification.


    Payers may sometimes return other non-compliant values.'
  source: healthcare
  type: string
- name: BadRequestException
  description: The server cannot process the request due to an apparent client error.
  source: healthcare
  type: object
- name: BadRequestExceptionResponseContent
  description: The server cannot process the request due to an apparent client error.
  source: core
  type: object
- name: BenefitRelatedEntityIdentification
  description: 'Code identifying the type of value provided in `entityIdentificationValue`.
    For example, `FI` - Federal Taxpayer''s Identification Number.


    Payers may sometimes return other non-compliant values.'
  source: healthcare
  type: string
- name: BenefitsAdditionalInformation
  description: Identifying information specific to this type of benefit.
  source: healthcare
  type: object
- name: BenefitsDateInformation
  description: "Dates associated with the benefits.\n  - This is where you can find\
    \ benefit-specific eligibility dates, if provided. These dates override dates\
    \ provided in `planDateInformation` for this benefit type.\n  - This is where\
    \ the payer may specify the last time the service was rendered (`latestVisitOrConsultation`),\
    \ which you can use to determine whether the patient has already reached the allowed\
    \ frequency, if applicable. For example, this object could contain the date when\
    \ the patient received their last dental cleaning.\n  - These dates only apply\
    \ to the `benefitsInformation` object in which this `benefitsDateInformation`\
    \ is provided."
  source: healthcare
  type: object
- name: BenefitsInformation
  description: Schema type from the Stedi healthcare API
  source: healthcare
  type: object
- name: BenefitsInformationCode
  description: 'The code indicating the type of benefits information. Visit [Eligibility
    and benefit codes](https://www.stedi.com/docs/healthcare/eligibility-active-coverage-benefits#benefit-type-codes)
    for more information.


    Payers may sometimes return other non-compliant values.'
  source: healthcare
  type: string
- name: BenefitsInformationCoverageLevelCode
  description: "Code indicating the level of coverage for the patient. \n\nThis will\
    \ either be `CHD` - Children Only, `DEP` - Dependents Only, `ECH` - Employee and\
    \ Children, `EMP` - Employee Only, `ESP` - Employee and Spouse, `FAM` - Family,\
    \ `IND` - Individual, `SPC` - Spouse and Children, `SPO` - Spouse Only, or `Unknown`.\n\
    \nPayers may sometimes return other non-compliant values."
  source: healthcare
  type: string
- name: BenefitsInformationCoverageLevelName
  description: 'The full name of the coverage level code.


    Payers may sometimes return other non-compliant values.'
  source: healthcare
  type: string
- name: BenefitsInformationName
  description: 'The full name of the benefits information code.


    Payers may sometimes return other non-compliant values.'
  source: healthcare
  type: string
- name: BenefitsRelatedEntity
  description: 'Identify another entity associated with the eligibility or benefits.
    This could be a provider, an individual, an organization, or another payer.


    This array is commonly used to designate the patient''s primary care provider
    (PCP), another organization that handles a specific carveout benefit type, or
    another health plan for the patient (coordination of benefits scenarios).


    This is where information for a crossover carrier such as Medicaid or Medicare
    is provided, if it''s applicable to the patient and the payer supports it.'
  source: healthcare
  type: object
- name: BenefitsRelatedEntityRelationshipCode
  description: 'Code specifying the relationship between the entity and the patient.


    Payers may sometimes return other non-compliant values.'
  source: healthcare
  type: string
- name: BenefitsServiceDelivery
  description: The delivery or usage pattern for the benefits.
  source: healthcare
  type: object
- name: BenefitsServiceDeliveryQuantityQualifier
  description: 'The name of the `quantityQualifierCode`. For example, `Days`.


    Payers may sometimes return other non-compliant values.'
  source: healthcare
  type: string
- name: BenefitsServiceDeliveryQuantityQualifierCode
  description: 'Code specifying the type of quantity.


    Payers may sometimes return other non-compliant values.'
  source: healthcare
  type: string
- name: Billing
  description: 'Information about the billing provider.

    - You must provide an `address` that is a physical location such as the office
    where care is delivered or an administrative facility.

    - For tax identification, you must include either the provider''s Social Security
    Number (SSN) in the `ssn` property _or_ their Employer Identification Number (EIN)
    in the `employerId` property, but not both.

    - If the billing provider has an NPI, you must include it in the `npi` property.
    If the billing provider does not have an NPI, you must include either the `commercialNumber`
    or the `locationNumber` for identification. Some payers may require the `npi`
    **and** either the `commercialNumber` or the `locationNumber` as a secondary identifier.

    - Some solo providers may use their SSN as their EIN. In this case, submit the
    SSN in the `ssn` property and leave the `employerId` property blank.'
  source: healthcare
  type: object
- name: BillingProviderType
  description: Defines the billing provider type.
  source: healthcare
  type: string
- name: BusinessContactInformation
  description: A person or office to whom administrative communications should be
    directed.
  source: healthcare
  type: object
- name: BusinessIdentifier
  description: Schema type from the Stedi core API
  source: core
  type: object
- name: COB
  description: Schema type from the Stedi healthcare API
  source: healthcare
  type: object
- name: COBBenefitsDateInformation
  description: Dates associated with the benefits. Dates listed only apply to the
    `benefitsInformation` object in which this benefitsDateInformation is provided.
  source: healthcare
  type: object
- name: COBBenefitsInformation
  description: Schema type from the Stedi healthcare API
  source: healthcare
  type: object
- name: COBBenefitsInformationName
  description: The full name of the benefits information code.
  source: healthcare
  type: string
- name: COBBenefitsRelatedEntity
  description: Schema type from the Stedi healthcare API
  source: healthcare
  type: object
- name: COBDependent
  description: 'A dependent for which you want to check coordination of benefits.

    - An individual qualifies as a dependent when they are listed as a dependent on
    the subscriber''s insurance plan AND the payer cannot uniquely identify them through
    information outside the subscriber''s policy. For example, if the dependent has
    their own member ID number, you should identify them in the `subscriber` object
    instead.

    - The demographic information you provide **must** patch the payer''s data exactly.
    For example, if the payer has the dependent''s name as `Jonathan Doe`, a COB request
    for `Jon Doe` will fail because the name doesn''t match the payer''s records.'
  source: healthcare
  type: object
- name: COBEncounter
  description: 'Information about the encounter.

    - You can submit COB checks with the `30` service type code for Health Benefit
    Plan Coverage. This is the broadest service type code that covers all medical
    services and subtypes included in the patient’s health plan.

    - The service dates you provide **must** be within the past 2 years. COB checks
    don''t support requests with dates outside of this range.

    - Don''t send service dates that are in the future. Future service dates typically
    result in errors from the payer.

    - If you don''t specify a service date (either a single day or a range of dates),
    Stedi defaults to using the current date.'
  source: healthcare
  type: object
- name: COBMetaData
  description: Schema type from the Stedi healthcare API
  source: healthcare
  type: object
- name: COBPayer
  description: Schema type from the Stedi healthcare API
  source: healthcare
  type: object
- name: COBPlanDateInformation
  description: 'Dates associated with the patient''s health plan coverage. This information
    is used to determine their eligibility for benefits.

    - The provided dates apply to every benefit within the patient''s health plan
    unless specifically noted within a `benefitsInformation[].benefitsDateInformation`
    object.

    - If the payer sends back date(s) that are different for the subscriber and dependents,
    Stedi includes only the dates for the dependent in this object and omits the subscriber''s
    date(s). Dependents can have different coverage dates than the subscriber due
    to qualifying life events, such as starting a new job or passing the age limit
    for coverage through their parent''s plan.'
  source: healthcare
  type: object
- name: COBProvider
  description: Information about the entity requesting the coverage.
  source: healthcare
  type: object
- name: COBResponseBenefitsInformationCode
  description: The code indicating the type of benefits information. Can be `1` -
    Active Coverage, `6` - Inactive, `R` - Other or Additional Payor, or `V` - Cannot
    Process.
  source: healthcare
  type: string
- name: COBResponseBenefitsInformationSubscriber
  description: Schema type from the Stedi healthcare API
  source: healthcare
  type: object
- name: COBResponseDependent
  description: Information about the dependent listed in the original COB request.
  source: healthcare
  type: object
- name: COBResponseProvider
  description: Information about the entity that submitted the original eligibility
    check request. This may be an individual practitioner, a medical group, a hospital,
    or another type of healthcare provider.
  source: healthcare
  type: object
- name: COBResponseServiceTypeCode
  description: Code identifying the type of services included in a `benefitsInformation`
    object.
  source: healthcare
  type: string
- name: COBResponseServiceTypeCodeName
  description: The names of the `benefitsInformation[].serviceTypeCodes` included
    in the response.
  source: healthcare
  type: string
- name: COBResponseSubscriber
  description: Information about the primary policyholder for the insurance plan listed
    in the COB request.
  source: healthcare
  type: object
- name: COBServiceTypeCode
  description: The service type code for the encounter. If not provided, the default
    value is `30`.
  source: healthcare
  type: string
- name: COBSubscriber
  description: "The primary policyholder for the insurance plan _or_ a dependent with\
    \ a unique member ID. If a dependent has a unique member ID, include their information\
    \ here and leave `dependent` empty.\n\n\n\nThe demographic information you provide\
    \ **must** match the payer's data exactly. For example, if the payer has the subscriber's\
    \ name as `Jonathan Doe`, a COB request for `Jon Doe` will fail because the name\
    \ doesn't match the payer's records. Also note that:\n  - Any prefix on the member's\
    \ card is considered part of the `memberID` used for the search.\n  - Mismatches\
    \ in the `memberId` are one of the most common causes of `Member Not Found` errors.\
    \ We strongly recommend first performing an [Eligibility Check](https://www.stedi.com/docs/healthcare/api-reference/post-healthcare-eligibility)\
    \ and using the `memberId` in the response to populate your COB check.\n  - We\
    \ recommend including the `ssn` property in addition to the `memberId` if possible.\
    \ This allows Stedi to do an additional search for the patient when the `memberId`\
    \ doesn't return a match.\n  - Stedi can identify coverage overlap for the same\
    \ payer if the member ID differs between the two coverages."
  source: healthcare
  type: object
- name: CertificationConditionCodeAppliesIndicator
  description: Code indicating whether an EPSDT referral was given to the patient.
    Can be set to `N` - No or `Y` - Yes.
  source: healthcare
  type: string
- name: CertificationTypeCode
  description: Code indicating the type of certification. Can be set to `I` - Initial,
    `R` - Renewal, or `S` - Revised.
  source: healthcare
  type: string
- name: Claim
  description: Information about the claim and its status.
  source: healthcare
  type: object
- name: ClaimAcknowledgmentDetails
  description: Schema type from the Stedi healthcare API
  source: healthcare
  type: object
- name: ClaimAcknowledgmentDetailsServiceProvider
  description: Information about the service provider.
  source: healthcare
  type: object
- name: ClaimAcknowledgmentPayer
  description: Schema type from the Stedi healthcare API
  source: healthcare
  type: object
- name: ClaimAcknowledgmentServiceIdQualifierCode
  description: Code identifying the source of the procedure code in claim status reports.
  source: healthcare
  type: string
- name: ClaimAcknowledgmentServiceIdQualifierCodeValue
  description: Human-readable descriptions for service ID qualifier codes.
  source: healthcare
  type: string
- name: ClaimAcknowledgmentServiceLines
  description: Schema type from the Stedi healthcare API
  source: healthcare
  type: object
- name: ClaimAcknowledgmentServiceLinesService
  description: Information about the service provided.
  source: healthcare
  type: object
- name: ClaimAcknowledgmentTransactions
  description: Schema type from the Stedi healthcare API
  source: healthcare
  type: object
- name: ClaimAcknowledgmentTransactionsProvider
  description: Information about the provider receiving the claim status details.
  source: healthcare
  type: object
- name: ClaimAdjustment
  description: Schema type from the Stedi healthcare API
  source: healthcare
  type: object
- name: ClaimAdjustmentDetails
  description: The adjustment reason codes and amounts. You can include up to six
    objects in this array to describe a single adjustment group code.
  source: healthcare
  type: object
- name: ClaimAdjustmentGroupCode
  description: Defines the category of adjustment reason codes that explain why a
    claim payment was adjusted. These codes categorize adjustments into contractual
    obligations, payer-initiated reductions, patient responsibilities, and other adjustments.
  source: healthcare
  type: string
- name: ClaimAdjustments
  description: Claim-level adjustments with reason codes and amounts.
  source: healthcare
  type: object
- name: ClaimAttachmentReference
  description: Information about the claim attachment.
  source: claims
  type: object
- name: ClaimCodeInformation
  description: Supply information specific to hospital claims, such as the priority
    of the admission.
  source: healthcare
  type: object
- name: ClaimContractInformation
  description: Required when the submitter is contractually obligated to supply this
    information on post-adjudicated claims.
  source: healthcare
  type: object
- name: ClaimContractInformationContractTypeCode
  description: A code identifying the type of contract. Can be set to `01` - Diagnosis
    Related Group (DRG), `02` - Per Diem, `03` - Variable Per Diem, `04` - Flat, `05`
    - Capitated, `06` - Percent, or `09` - Other.
  source: healthcare
  type: string
- name: ClaimDateInformation
  description: You must provide at least one date related to the claim. For example,
    the date on which the patient was admitted to the hospital.
  source: healthcare
  type: object
- name: ClaimFilingCode
  description: 'A code identifying the type of claim. For example `DS` - Disability.

    - Use `OF` when submitting Medicare Part D claims.

    - Use `ZZ` when you don''t know the type of insurance.

    - Some payers reject claims with invalid codes. If you''re not sure which code
    to use, we recommend running a [real-time eligibility check](https://www.stedi.com/docs/healthcare/api-reference/post-healthcare-eligibility)
    and using the value returned in the most relevant `benefitsInformation.insuranceTypeCode`
    property. Note that the eligibility response uses a different code list than claims,
    so you may need to map that code value to the appropriate claim filing code.



    Visit [Claims code lists](https://www.stedi.com/docs/healthcare/claims-code-lists#claim-filing-indicator-codes)
    for a complete list.'
  source: healthcare
  type: string
- name: ClaimFilingIndicatorCode
  description: A code identifying the type of claim. For example `DS` - Disability.
    Use `OF` when submitting Medicare Part D claims. Use `ZZ` when you don't know
    the type of insurance. Visit [Claims code lists](https://www.stedi.com/docs/healthcare/claims-code-lists#claim-filing-indicator-codes)
    for a complete list.
  source: healthcare
  type: string
- name: ClaimFrequencyCode
  description: 'Identify the type of claim. Can be set to: `1` - indicates an original
    claim, `7` - Indicates the new claim is a replacement or correction, `8` - Indicates
    the claim is void or canceled'
  source: healthcare
  type: string
- name: ClaimIdentifier
  description: "A code specifying the type of transaction. Defaults to `CH` if not\
    \ provided.\n  - `31`: Only for use by state Medicaid agencies performing post\
    \ payment recovery.\n  - `CH`: Use when the transaction contains only fee for\
    \ service claims or claims with at least one chargeable line item. Also use when\
    \ it's not clear whether a transaction contains claims or capitated encounters,\
    \ or if the transaction contains a mix of claims and capitated encounters.\n \
    \ - `RP`: Use for capitated encounters. Also use when the transaction is being\
    \ sent to an entity for purposes other than adjudication of a claim. For example,\
    \ when you're sending the claim to a state health agency that is using the claim\
    \ for health data reporting purposes."
  source: healthcare
  type: string
- name: ClaimInformation
  description: "Information about the healthcare claim. \n\nNote that the objects\
    \ and properties marked as **required** are required for all claims, while others\
    \ are conditionally required, depending on type of claim and claim circumstances.\
    \ For example, you must always provide the patient's diagnosis codes in the `healthCareCodeInformation`\
    \ object, but you only need to provide the `otherSubscriberInformation` object\
    \ in coordination of benefits scenarios. When you include a conditionally required\
    \ object, you must provide all of its required properties."
  source: healthcare
  type: object
- name: ClaimInformationBenefitsAssignmentCertificationIndicator
  description: A code indicating whether the patient or an authorized person has authorized
    the plan to remit payment directly to the provider. Use `W` when the patient refuses
    to assign benefits. Can be set to `N` - No (Payment should go to the patient),
    `Y` - Yes (Payment should go directly to the provider), or `W` - Not Applicable
    (use when patient refuses to assign benefits).
  source: healthcare
  type: string
- name: ClaimInformationConditionCodesItem
  description: Schema type from the Stedi healthcare API
  source: healthcare
  type: string
- name: ClaimInformationRelatedCausesCodeItem
  description: Code identifying an accompanying cause of an illness, injury or an
    accident. Can be set to `AA` - Auto Accident, `EM` - Employment, or `OA` - Other
    Accident.
  source: healthcare
  type: string
- name: ClaimLevelEntityIdentifierCode
  description: Entity identifier code for claim level in claim status reports
  source: healthcare
  type: string
- name: ClaimLevelEntityIdentifierCodeValue
  description: Human-readable descriptions for claim level entity identifier codes
  source: healthcare
  type: string
- name: ClaimLevelStatus
  description: Schema type from the Stedi healthcare API
  source: healthcare
  type: object
- name: ClaimNote
  description: Comments or special instructions related to the claim. Contains information
    required to substantiate the medical treatment that isn't provided elsewhere in
    the claim.
  source: healthcare
  type: object
- name: ClaimNotes
  description: Free-form information to substantiate the medical treatment that isn't
    provided elsewhere in the claim submission. Also used to provide narrative information
    from the forms Home Health Certification and Plan of Treatment or Medical Update
    and Patient Information, as needed to substantiate home health services. You can
    provide up to 10 strings in this array.
  source: healthcare
  type: object
- name: ClaimPaymentAdviceFilingIndicatorCode
  description: Identifies the type of health plan or insurance coverage under which
    the claim was filed. These codes indicate the specific type of insurance arrangement,
    government program, or coverage type that applies to the claim.
  source: healthcare
  type: string
- name: ClaimPaymentAdvicePayer
  description: Information about the payer.
  source: healthcare
  type: object
- name: ClaimPaymentAdvicePayerAddress
  description: Address information for the payer.
  source: healthcare
  type: object
- name: ClaimPaymentAdviceResponse
  description: The complete claim payment advice response from the payer.
  source: healthcare
  type: object
- name: ClaimPaymentAdviceResponseFinancialInformation
  description: Information about a payment, including the payment method, payment
    amount, and account details for both the sender and receiver.
  source: healthcare
  type: object
- name: ClaimPaymentAdviceResponsePaymentAndRemitReassociationDetails
  description: Information to uniquely identify the transaction and help with reassociating
    payments and remittances that have been separated.
  source: healthcare
  type: object
- name: ClaimPaymentAdviceServiceLines
  description: Information about specific service lines in the claim payment advice.
  source: healthcare
  type: object
- name: ClaimPaymentAdviceServiceLinesRenderingProviderInformation
  description: Identifiers for the provider who rendered this service.
  source: healthcare
  type: object
- name: ClaimPaymentAdviceServiceLinesServiceIdentification
  description: Additional identifiers related to the service line.
  source: healthcare
  type: object
- name: ClaimPaymentAdviceServiceLinesServicePaymentInformation
  description: Payment and control information about a provider for a particular service.
  source: healthcare
  type: object
- name: ClaimPaymentAdviceServiceLinesServiceSupplementalAmounts
  description: Information about the service supplemental amount. All values are expressed
    as decimals.
  source: healthcare
  type: object
- name: ClaimPaymentAdviceServiceLinesServiceSupplementalQuantities
  description: Additional quantity information about the service. All values are expressed
    as decimals.
  source: healthcare
  type: object
- name: ClaimPaymentEnrollmentProcess
  description: Details about the enrollment process for Electronic Remittance Advice
    (ERAs).
  source: healthcare
  type: object
- name: ClaimPricingInformation
  description: Schema type from the Stedi healthcare API
  source: healthcare
  type: object
- name: ClaimPricingInformationProductOrServiceIDQualifier
  description: Code identifying the type of product or service ID used. Can be set
    to `ER` - Jurisdiction Specific Procedure and Supply Codes, `HC` - Health Care
    Financing Administration Common Procedural Coding System (HCPCS) Codes, `HP` -
    Health Insurance Prospective Payment System (HIPPS) Skilled Nursing Facility Rate
    Code, `IV` - Home Infusion EDI Coalition (HIEC) Product/Service Code, or `WK`
    - Advanced Billing Concepts (ABC) Codes. Note that ABC codes are deprecated and
    should not be used in new claims. If you provide this property, you must also
    provide `repricedApprovedHCPCSCode` Visit [Claims code lists](https://www.stedi.com/docs/healthcare/claims-code-lists#product-or-service-id-qualifier-codes)
    for a complete list and additional usage notes.
  source: healthcare
  type: string
- name: ClaimPricingRepricingInformation
  description: Repricing information to be completed by repricers, not providers.
    For capitated encounters, pricing or repricing information usually is not applicable
    and is provided to qualify other information within the claim.
  source: healthcare
  type: object
- name: ClaimReference
  description: Information about the claim.
  source: healthcare
  type: object
- name: ClaimServiceFacilityLocation
  descrip

# --- truncated at 32 KB (201 KB total) ---
# Full source: https://raw.githubusercontent.com/api-evangelist/stedi/refs/heads/main/vocabulary/stedi-vocabulary.yml

Work with this as data

Every vocabulary here is available over the APIs.io API and to AI agents over MCP. Vocabularies is not yet its own endpoint on the v1 API. Reach it through catalog search and the tag graph, or the MCP server.

MCP server

One button, every client — Claude, Cursor, VS Code and the rest.

https://apis.io/mcp

Tools for vocabularies

3 MCP tools reach this
  • apis_io_searchSTART HERE — APIs, providers and tags for one query, each with its total.
  • resolveTurn a domain, URL or GitHub org into the provider it belongs to.
  • find_cohortsEvery scored population of providers in the catalog.
All 92 tools →

Call it yourself

curl for this page
Search the catalog
curl "https://apis.io/api/v1/search?q=stedi-vocabulary&limit=10"
Everything under a tag
curl "https://apis.io/api/v1/tags/stedi-vocabulary"

Calls without X-API-Key need no key. Calls with it need a paid plan — get a key.

Get an API key

Free tier, no form to fill in. Signing in shares your email address with us — we store it to create your key and to recognise you if you sign in with another provider. See our Privacy Policy and Terms.

A second provider on the same verified email joins the account you already have.