The Fixed Access Information Service from ETSI GS MEC 029, extending MEC information exposure beyond mobile to fixed broadband access networks including PON and cable, so edge applications can read fixed-line network conditions.
openapi: 3.1.0
jsonSchemaDialect: https://json-schema.org/draft/2020-12/schema
info:
contact:
url: https://forge.etsi.org/rep/mec/gs029-fai-api
title: ETSI GS MEC 029 Fixed Access Information API
description: The ETSI MEC ISG Fixed Access Information API described using OpenAPI.
license:
name: BSD-3-Clause
url: https://forge.etsi.org/legal-matters
version: 2.2.1
servers:
- url: https://localhost/fai/v1
paths:
/queries/fa_info:
get:
summary: Retrieve current status of the FAI.
description: The GET method is used to query information about the available fixed access networks.
operationId: QueriesFainfoGET
tags:
- queries
parameters:
- $ref: '#/components/parameters/Query.Customerpremisesinfo'
- $ref: '#/components/parameters/Query.Lastmiletech'
- $ref: '#/components/parameters/Query.Interfacetype'
- $ref: '#/components/parameters/Query.Dsbw'
- $ref: '#/components/parameters/Query.Usbw'
- $ref: '#/components/parameters/Query.Latency'
responses:
'200':
description: Upon success, a response body containing the information of zero or more fix access networks is returned.
content:
application/json:
schema:
type: array
items:
$ref: '#/components/schemas/FaInfo'
'400':
$ref: '#/components/responses/400'
'401':
$ref: '#/components/responses/401'
'403':
$ref: '#/components/responses/403'
'404':
$ref: '#/components/responses/404'
'406':
$ref: '#/components/responses/406'
'429':
$ref: '#/components/responses/429'
/queries/device_info:
get:
summary: Retrieve current status of the device information.
description: The GET method is used to query information about the devices that are connected to a fixed access network.
operationId: QueriesDeviceinfoGET
tags:
- queries
parameters:
- $ref: '#/components/parameters/Query.Gwid'
- $ref: '#/components/parameters/Query.Deviceid'
- $ref: '#/components/parameters/Query.Devicestatus'
responses:
'200':
description: Upon success, a response body containing the information of zero or more devices is returned.
content:
application/json:
schema:
type: array
items:
$ref: '#/components/schemas/DeviceInfo'
'400':
$ref: '#/components/responses/400'
'401':
$ref: '#/components/responses/401'
'403':
$ref: '#/components/responses/403'
'404':
$ref: '#/components/responses/404'
'406':
$ref: '#/components/responses/406'
'429':
$ref: '#/components/responses/429'
/queries/cable_line_info:
get:
summary: Retrieve current status of the cable line information.
description: The GET method is used to query information about the cable line of a fixed access network.
operationId: QueriesCablelineinfoGET
tags:
- queries
- cable_line_info
parameters:
- $ref: '#/components/parameters/Query.Customerpremisesinfo1'
- $ref: '#/components/parameters/Query.Cmid'
responses:
'200':
description: Upon success, a response body containing the information of zero or more cable lines is returned.
content:
application/json:
schema:
type: array
items:
$ref: '#/components/schemas/CableLineInfo'
'400':
$ref: '#/components/responses/400'
'401':
$ref: '#/components/responses/401'
'403':
$ref: '#/components/responses/403'
'404':
$ref: '#/components/responses/404'
'406':
$ref: '#/components/responses/406'
'429':
$ref: '#/components/responses/429'
/queries/optical_network_info:
get:
summary: Retrieve current status of the optical network information.
description: The GET method is used to query information about the optical network.
operationId: QueriesOpticalnetworkinfoGET
tags:
- queries
- optical_network_info
parameters:
- $ref: '#/components/parameters/Query.Customerpremisesinfo2'
- $ref: '#/components/parameters/Query.Ponys_id'
- $ref: '#/components/parameters/Query.Onuid'
responses:
'200':
description: Upon success, a response body containing the information of zero or more optical networks is returned.
content:
application/json:
schema:
type: array
items:
$ref: '#/components/schemas/PonInfo'
'400':
$ref: '#/components/responses/400'
'401':
$ref: '#/components/responses/401'
'403':
$ref: '#/components/responses/403'
'404':
$ref: '#/components/responses/404'
'406':
$ref: '#/components/responses/406'
'429':
$ref: '#/components/responses/429'
/subscriptions:
get:
summary: Retrieve a list of active subscriptions for this subscriber.
description: The GET method is used to request information about the subscriptions for this requestor. Upon success, the response contains entity body with the list of links to the subscriptions that are present for the requestor.
operationId: SubscriptionsGET
tags:
- subscriptions
parameters:
- $ref: '#/components/parameters/Query.Subscription_type'
responses:
'200':
description: Upon success, a response body containing the list of links to requestor's subscriptions is returned. The list shall only contain subscriptions of the subscription type specified by the URI query parameters.
content:
application/json:
schema:
type: object
properties:
SubscriptionLinkList:
$ref: '#/components/schemas/SubscriptionLinkList'
'400':
$ref: '#/components/responses/400'
'401':
$ref: '#/components/responses/401'
'403':
$ref: '#/components/responses/403'
'404':
$ref: '#/components/responses/404'
'406':
$ref: '#/components/responses/406'
'429':
$ref: '#/components/responses/429'
post:
summary: Create a new subscription.
description: The POST method is used to create a new subscription to FAI notifications. Upon success, the response contains entity body describing the created subscription.
operationId: SubscriptionsPOST
tags:
- subscriptions
requestBody:
description: 'The entity body in the request contains data type of the specific FAI event subscription that is to be created, where the data type options are listed below:
OnuAlarmSubscription.
DevInfoSubscription.
CmConnSubscription.
AniAlarmSubscription.'
content:
application/json:
schema:
type: object
properties:
OnuAlarmSubscription:
$ref: '#/components/schemas/OnuAlarmSubscription'
responses:
'201':
description: 'Indicates successful resource creation, where the resource URI shall be returned in the HTTP Location header field.
In the returned NotificationSubscription structure, the created subscription is described using the appropriate data type from the list below:
OnuAlarmSubscription.
DevInfoSubscription.
CmConnSubscription.
AniAlarmSubscription.'
content:
application/json:
schema:
type: object
properties:
OnuAlarmSubscription:
$ref: '#/components/schemas/OnuAlarmSubscription'
'400':
$ref: '#/components/responses/400'
'401':
$ref: '#/components/responses/401'
'403':
$ref: '#/components/responses/403'
'404':
$ref: '#/components/responses/404'
'406':
$ref: '#/components/responses/406'
'415':
$ref: '#/components/responses/415'
'422':
$ref: '#/components/responses/422'
'429':
$ref: '#/components/responses/429'
callbacks:
notification:
'{$request.body#/callbackUri}':
post:
summary: Callback POST used to send a notification
description: Subscription notification
operationId: notificationPOST710301
requestBody:
description: Subscription notification
required: true
content:
application/json:
schema:
type: object
properties:
subscriptionNotification:
oneOf:
- $ref: '#/components/schemas/OnuAlarmSubscription'
- $ref: '#/components/schemas/DevInfoSubscription'
- $ref: '#/components/schemas/CmConnSubscription'
- $ref: '#/components/schemas/AniAlarmSubscription'
responses:
'204':
description: No content
'404':
description: Not found
parameters: []
/subscriptions/{subscriptionId}:
get:
summary: Retrieve information on current specific subscription.
description: The GET method is used to retrieve information about this subscription. Upon success, the response contains entity body with the data type describing the subscription.
operationId: SubscriptionsGETSubscriptionid
tags:
- subscriptions
responses:
'200':
description: 'Upon success, a response body containing data type describing the specific FAI event subscription is returned. The allowed data types for subscriptions are as follows:
OnuAlarmSubscription.
DevInfoSubscription.
CmConnSubscription.
AniAlarmSubscription.'
content:
application/json:
schema:
type: object
properties:
OnuAlarmSubscription:
$ref: '#/components/schemas/OnuAlarmSubscription'
'400':
$ref: '#/components/responses/400'
'401':
$ref: '#/components/responses/401'
'403':
$ref: '#/components/responses/403'
'404':
$ref: '#/components/responses/404'
'406':
$ref: '#/components/responses/406'
'429':
$ref: '#/components/responses/429'
parameters:
- name: subscriptionId
in: path
required: true
description: The unique identifier of the subscriptionId.
schema:
type: string
put:
summary: Modify existing subscription by sending a new data structure.
description: The PUT method is used to update the existing subscription. PUT method in this case has "replace" semantics. Upon successful operation, the target resource is updated with new Data Type received within the message body of the PUT request.
operationId: SubscriptionsPUTSubscriptionid
tags:
- subscriptions
parameters:
- name: subscriptionId
in: path
required: true
description: The unique identifier of the subscriptionId.
schema:
type: string
delete:
summary: Cancel the existing subscription.
description: The DELETE method is used to cancel the existing subscription. Cancellation can be made by deleting the resource that represents existing subscription.
operationId: SubscriptionsDELETESubscriptionid
tags:
- subscriptions
responses:
'204':
$ref: '#/components/responses/204'
'401':
$ref: '#/components/responses/401'
'403':
$ref: '#/components/responses/403'
'404':
$ref: '#/components/responses/404'
'429':
$ref: '#/components/responses/429'
parameters:
- name: subscriptionId
in: path
required: true
description: The unique identifier of the subscriptionId.
schema:
type: string
components:
schemas:
LinkType:
x-etsi-ref: 6.5.8
type: object
properties:
href:
description: URI referring to a resource
type: string
format: uri
required:
- href
Href:
description: The URI referring to the subscription.
type: string
format: uri
ProblemDetails:
type: object
properties:
type:
type: string
format: uri
description: A URI reference according to IETF RFC 3986 that identifies the problem type
title:
type: string
description: A short, human-readable summary of the problem type
status:
type: integer
format: uint32
description: The HTTP status code for this occurrence of the problem
detail:
type: string
description: A human-readable explanation specific to this occurrence of the problem
instance:
type: string
format: uri
description: A URI reference that identifies the specific occurrence of the problem
FaInfo:
x-etsi-ref: 6.2.2
type: object
properties:
timeStamp:
description: Time stamp.
$ref: '#/components/schemas/TimeStamp'
customerPremisesInfo:
description: The physical location of a customer site.
$ref: '#/components/schemas/CpInfo'
lastMileTech:
type: integer
enum:
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
description: 'An informative field identifying the last mile access technology used.
The valid values are:
1 = ADSL.
2 = VDSL.
3 = GPON.
4 = XGPON.
5 = NGPON2.
6 = XGSPON.
7 = GFAST.
8 = P2PEthernet.'
interfaceType:
type: integer
enum:
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
description: 'The physical interface used for the end customer site:
1 = 100BASE-TX.
2 = 1000BASE-TX.
3 = 1000BASE-LX.
4 = 1000BASELX10.
5 = 1000BASEBX10.
6 = 1000BASE-LH.
7 = 1000Base-ZX.
8 = ADSL-RJ11.
9 = VDSL-RJ11.
10 = GPON.'
dsbw:
description: The bandwidth (in Mbps) from the network towards the customer site.
type: integer
usbw:
description: The bandwidth (in Mbps) from the customer site towards the network.
type: integer
latency:
description: Maximum baseline latency (in ms) between customer site and service edge node.
type: integer
required:
- customerPremisesInfo
- lastMileTech
- interfaceType
DeviceInfo:
x-etsi-ref: 6.2.3
type: object
properties:
timeStamp:
description: Time stamp.
$ref: '#/components/schemas/TimeStamp'
gwId:
description: 'Information (typically the serial number) to identify an Internet Gateway Device through which the customer premises device is connected.
This value shall remain fixed over the lifetime of the device, including across firmware updates.'
type: string
deviceId:
description: 'Typically, the serial number of the device.
This value shall remain fixed over the lifetime of the device, including across firmware updates.'
type: string
deviceStatus:
type: integer
enum:
- 1
- 2
- 3
- 4
description: 'Current operational status of the device. Enumeration of:
1 = Up.
2 = Initializing.
3 = Error.
4 = Disabled.'
upTime:
description: Time in seconds since the device was last restarted.
type: integer
iPConnectionUpTime:
description: The time in seconds that the IP interface has been connected.
type: integer
totalBytesSent:
description: Total number of IP payload bytes sent since the device was last restarted.
type: integer
totalBytesReceived:
description: Total number of IP payload bytes received since the device was last restarted.
type: integer
totalPacketsSent:
description: Total number of packets sent since the device was last restarted.
type: integer
totalPacketsReceived:
description: Total number of packets received since the device was last restarted.
type: integer
iPPingDiagnostics:
description: The result of an IP-layer ping test.
$ref: '#/components/schemas/IPPingDiagnostics'
traceRouteDiagnostics:
description: The result of an IP-layer trace-route test.
$ref: '#/components/schemas/TraceRouteDiagnostics'
downloadDiagnostics:
description: The result of a HTTP and FTP DownloadDiagnostics Test.
$ref: '#/components/schemas/DownloadDiagnostics'
uploadDiagnostics:
description: The result of a HTTP and FTP UploadDiagnostics Test.
$ref: '#/components/schemas/UploadDiagnostics'
required:
- gwId
- deviceId
- deviceStatus
- upTime
- iPConnectionUpTime
- totalBytesSent
- totalBytesReceived
- totalPacketsSent
- totalPacketsReceived
CableLineInfo:
x-etsi-ref: 6.2.4
type: object
properties:
timeStamp:
description: Time stamp.
$ref: '#/components/schemas/TimeStamp'
customerPremisesInfo:
description: The physical location of a customer site.
$ref: '#/components/schemas/CpInfo'
cmId:
description: 'Information (typically the serial number) to identify a Cable Modem at subscriber locations intended for use in conveying data communications on a cable data system.
This value SHALL remain fixed over the lifetime of the device, including across firmware updates.'
type: string
cmStatus:
$ref: '#/components/schemas/CmStatus'
cmDpvStats:
$ref: '#/components/schemas/CmDpvStats'
serviceFlowStats:
$ref: '#/components/schemas/ServiceFlowStats'
required:
- customerPremisesInfo
- cmId
PonInfo:
x-etsi-ref: 6.2.5
type: object
properties:
timeStamp:
description: Time stamp.
$ref: '#/components/schemas/TimeStamp'
customerPremisesInfo:
description: The physical location of a customer site.
$ref: '#/components/schemas/CpInfo'
ponSYS_ID:
description: 'The 20-bit identity of the optical system within a certain domain.
This is a reference value set by the OSS.'
type: string
onuId:
description: Information to identify an Optical Network Unit.
type: string
ponTech:
type: integer
enum:
- 1
- 2
- 3
- 4
description: 'An informative field identifying the optical technology used.
The valid values are:
1 = GPON.
2 = XGPON.
3 = NGPON2.
4 = XGSPON.'
operationalState:
type: integer
enum:
- 0
- 1
description: 'It reports whether the ONU is currently capable of performing its function. Valid values are:
0 = enabled
1 = disabled'
dsRate:
type: integer
enum:
- 1
- 2
description: "Downstream line rate, valid values are:\n1 =\t2,48832 Gbit/s: G-PON [i.9]; or\nNG-PON2 option 2 [i.8].\n2 =\t9,95328 Gbit/s: XG-PON [i.10]; or\nXGS-PON [i.11]; or\nNG-PON2 option 1 [i.8]."
usRate:
type: integer
enum:
- 1
- 2
- 3
description: "Upstream line rate, valid values are:\n1 =\t1,24416 Gbit/s: G-PON option 1 [i.9].\n2 =\t2,48832 Gbit/s: G-PON option 2 [i.9]; or\nXG-PON [i.10]; or\nNG-PON2 option 2 [i.8].\n3 =\t9,95328 Gbit/s: XGS-PON [i.11]; or\nNG-PON2 option 1 [i.8]."
required:
- customerPremisesInfo
- ponSYS_ID
- onuId
- ponTech
- operationalState
- dsRate
- usRate
OnuAlarmSubscription:
x-etsi-ref: 6.3.2
type: object
properties:
subscriptionType:
description: Shall be set to "OnuAlarmSubscription".
type: string
callbackReference:
description: URI exposed by the client on which to receive notifications via HTTP. See note.
type: string
format: uri
requestTestNotification:
description: "Shall be set to TRUE by the service consumer to request a test notification via HTTP on the callbackReference URI, as described in ETSI GS MEC 009 [i.1], clause\_6.12a.\nDefault: FALSE. "
type: boolean
websockNotifConfig:
description: Provides details to negotiate and signal the use of a Websocket connection between FAIS and the service consumer for notifications. See note.
$ref: '#/components/schemas/WebsockNotifConfig'
_links:
$ref: '#/components/schemas/_links'
filterCriteriaOnuAlarm:
$ref: '#/components/schemas/FilterCriteriaOnuAlarm'
expiryDeadline:
description: Time stamp.
$ref: '#/components/schemas/TimeStamp'
required:
- subscriptionType
- filterCriteriaOnuAlarm
description: "|-\n NOTE:\tAt least one of callbackReference and websockNotifConfig shall be provided by the service consumer. If both are provided, it is up to FAIS to choose an alternative and return only that alternative in the response, as described in ETSI GS MEC 009 [i.1], clause 6.12a."
DevInfoSubscription:
x-etsi-ref: 6.3.3
type: object
properties:
subscriptionType:
description: Shall be set to "DevInfoSubscription".
type: string
callbackReference:
description: URI exposed by the client on which to receive notifications via HTTP. See note.
type: string
format: uri
requestTestNotification:
description: "Shall be set to TRUE by the service consumer to request a test notification via HTTP on the callbackReference URI, as described in ETSI GS MEC 009 [i.1], clause\_6.12a.\nDefault: FALSE. "
type: boolean
websockNotifConfig:
description: Provides details to negotiate and signal the use of a Websocket connection between FAIS and the service consumer for notifications. See note.
$ref: '#/components/schemas/WebsockNotifConfig'
_links:
$ref: '#/components/schemas/_links'
filterCriteriaDevInfo:
$ref: '#/components/schemas/FilterCriteriaDevInfo'
expiryDeadline:
description: Time stamp.
$ref: '#/components/schemas/TimeStamp'
required:
- subscriptionType
- filterCriteriaDevInfo
description: "|-\n NOTE:\tAt least one of callbackReference and websockNotifConfig shall be provided by the service consumer. If both are provided, it is up to FAIS to choose an alternative and return only that alternative in the response, as described in ETSI GS MEC 009 [i.1], clause 6.12a."
CmConnSubscription:
x-etsi-ref: 6.3.4
type: object
properties:
subscriptionType:
description: Shall be set to "CmConnSubscription".
type: string
callbackReference:
description: URI exposed by the client on which to receive notifications via HTTP. See note 1.
type: string
format: uri
requestTestNotification:
description: "Shall be set to TRUE by the service consumer to request a test notification via HTTP on the callbackReference URI, as described in ETSI GS MEC 009 [i.1], clause\_6.12a.\nDefault: FALSE. "
type: boolean
websockNotifConfig:
description: Provides details to negotiate and signal the use of a Websocket connection between FAIS and the service consumer for notifications. See note 1.
$ref: '#/components/schemas/WebsockNotifConfig'
_links:
$ref: '#/components/schemas/_links'
filterCriteriaCmConn:
$ref: '#/components/schemas/FilterCriteriaCmConn'
expiryDeadline:
description: Time stamp.
$ref: '#/components/schemas/TimeStamp'
required:
- subscriptionType
- filterCriteriaCmConn
description: "|-\n NOTE 1:\tAt least one of callbackReference and websockNotifConfig shall be provided by the service consumer. If both are provided, it is up to FAIS to choose an alternative and return only that alternative in the response, as described in ETSI GS MEC 009 [i.1], clause 6.12a.\nNOTE 2:\t'notReady' indicates that the CM has not started the registration process yet.\n\t'notSynchronized' indicates that the CM has not initiated or completed the synchronization of the downstream physical layer.\n\t'phySynchronized' indicates that the CM has completed the synchronization of the downstream physical layer.\n\t'dsTopologyResolutionInProgress' indicates that the CM is attempting to determine its MD-DS-SG.\n\t'usParametersAcquired' indicates that the CM has completed the upstream parameters acquisition or have completed the downstream and upstream service groups resolution.\n\t'rangingInProgress' indicates that the CM has initiated the initial ranging process.\n\t'rangingComplete' indicates that the CM has completed initial ranging and received a Ranging Status of success from the CMTS in the RNG-RSP message.\n\t'eaeInProgress' indicates that the CM has sent an Auth Info message for EAE.\n\t'dhcpv4InProgress' indicates that the CM has sent a DHCPv4 DISCOVER to gain IP connectivity.\n\t'dhcpv6InProgress' indicates that the CM has sent a DHCPv6 Solicit message.\n\t'dhcpv4Complete' indicates that the CM has received a DHCPv4 ACK message from the CMTS.\n\t'dhcpv6Complete' indicates that the CM has received a DHCPv6 Reply message from the CMTS.\n\t'todEstablished' indicates that the CM has successfully acquired time of day.\n\t'securityEstablished' indicates that the CM has successfully completed the BPI initialization process.\n\t'configFileDownloadComplete' indicates that the CM has completed the config file download process.\n\t'registrationInProgress' indicates that the CM has sent a Registration Request.\n\t'registrationComplete' indicates that the CM has successfully completed the Registration process with the CMTS.\n\t'accessDenied' indicates that the CM has received a registration aborted notification from the CMTS.\n\t'operational' indicates that the CM has completed all necessary initialization steps and is operational.\n\t'bpiInit' indicates that the CM has started the BPI initialization process as indicated in the CM config file.\n\t'forwardingDisabled' indicates that the registration process was completed, but the network access option in the received configuration file prohibits forwarding."
SubscriptionLinkList:
x-etsi-ref: 6.3.5
type: object
properties:
_links:
$ref: '#/components/schemas/_links1'
required:
- _links
AniAlarmSubscription:
x-etsi-ref: 6.3.6
type: object
properties:
subscriptionType:
description: Shall be set to "AniAlarmSubscription".
type: string
callbackReference:
description: URI exposed by the client on which to receive notifications via HTTP. See note.
type: string
format: uri
requestTestNotification:
description: "Shall be set to TRUE by the service consumer to request a test notification via HTTP on the callbackReference URI, as described in ETSI GS MEC 009 [i.1], clause\_6.12a.\nDefault: FALSE. "
type: boolean
websockNotifConfig:
description: Provides details to negotiate and signal the use of a Websocket connection between FAIS and the service consumer for notifications. See note.
$ref: '#/components/schemas/WebsockNotifConfig'
_links:
$ref: '#/components/schemas/_links'
filterCriteriaAniAlarm:
$ref: '#/components/schemas/FilterCriteriaAniAlarm'
onuId:
description: The unique identifiers for the optical network unit,
type: string
aniIndex:
description: The index of an access network interface supported by the optical network unit.
type: string
alarms:
description: "In case alarms is not included in the subscription request, the default value -1 = All shall be used and included in the response:\n0 =\tLowReceivedOpticalPower.\n(Received downstream optical power below threshold.)\n1 =\tHighReceivedOpticalPower.\n\t(Received downstream optical power above threshold.)\n2 =\tSignalFalure.\n(Bit error-based signal fail.)\n3 =\tSignalDegrade.\n(Bit error-based signal degrade.)\n4 =\tLowTransmitOpticalPower.\n(Transmit optical power below lower threshold.)\n5 =\tHighTransmitOpticalPower.\n(Transmit optical power above upper threshold.)\n6 =\tLaserBiasCurrent.\n(Laser bias current above threshold determined by vendor.)\n-1 =\tAll."
type: array
minItems: 0
items:
type: integer
expiryDeadline:
description: Time stamp.
$ref: '#/components/schemas/TimeStamp'
required:
- subscriptionType
- filterCriteriaAniAlarm
- onuId
- aniIndex
description: "|-\n NOTE:\tAt least one of callbackReference and websockNotifConfig shall be provided by the service consumer. If both are provided, it is up to FAIS to choose an alternative and return only that alternative in the response, as described in ETSI GS MEC 009 [i.1], clause 6.12a."
OnuAlarmNotification:
x-etsi-ref: 6.4.2
type: object
properties:
notificationType:
description: Shall be set to "OnuAlarmNotification".
type: string
timeStamp:
description: Time stamp.
$ref: '#/components/schemas/TimeStamp'
customerPremisesInfo:
description: The physical location of the related customer sites.
type: array
minItems: 0
items:
$ref: '#/components/schemas/CpInfo'
onuId:
description: The unique identifier for an optical network unit.
type: string
alarm:
type: integer
enum:
- 0
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
description: "Indicates the alarm of the ONU:\n0 \t= \tEquipmentAlarm.\n1 \t= \tPoweringAlarm.\n2 \t= \tBatteryMissing.\n3 \t= \tBatteryFailure.\n4 \t= \tBatteryLow.\n5 \t= \tPhysicalIntrusion.\n6 \t= \tOnuSelfTestFailure.\n7 \t= \tDyingGasp.\n8 \t= \tTemperatureYellow.\n9 \t= \tTemperatureRed.\n10 \t= \tVoltageYellow.\n11 \t= \tVoltageRed.\n12 \t= \tOnuManualPowerOff.\n13 \t= \tInvImage.\n14 \t= \tPseOverloadYellow.\n15 \t= \tPseOverloadRed."
required:
- notificationType
- onuId
- alarm
DevInfoNotification:
x-etsi-ref: 6.4.3
type: object
properties:
notificationType:
description: Shall be set to "DevInfoNotification".
type: string
timeStamp:
description: Time stamp.
# --- truncated at 32 KB (67 KB total) ---
# Full source: https://raw.githubusercontent.com/api-evangelist/etsi/refs/heads/main/openapi/mec/MEC029_FAI.yaml