Regrow · Schema

ExploreAPIInput

CompanyAgricultureSustainabilityGreenhouse Gas EmissionsCarbonRegenerative AgricultureRemote SensingClimate

Properties

Name Type Description
session_name string A string describing the session input data, typically a description of the agricultural field being modeled.
scenarios array A list of the field level simulations for modeling GHG outcomes, including one baseline scenario and one practice change scenario.
optional_ghg_boundaries array A list of optional GHG boundaries to include in the results. Defaults to an empty list. (deprecated)
conservative_deduction number The conservative deduction represents the amount that the estimated emissions reduction values for each GHG are reduced by,to represent conservative estimates. The conservative deduction applies to th
baseline_method string
reporting_information object
View JSON Schema on GitHub

JSON Schema

regrow-ag-explore-apiinput-schema.json Raw ↑
{
  "$schema": "https://json-schema.org/draft/2020-12/schema",
  "$id": "https://artifacts.apis.io/regrow-ag/json-schema/regrow-ag-explore-apiinput-schema.json",
  "title": "ExploreAPIInput",
  "x-generated": "2026-11-10",
  "x-method": "derived",
  "x-generator": "derive-json-schema.py",
  "x-source": "openapi/regrow-ag-v0-explore-api-intervention-api-openapi.yml#/components/schemas/ExploreAPIInput",
  "properties": {
    "session_name": {
      "type": "string",
      "title": "Session Name",
      "description": "A string describing the session input data, typically a description of the agricultural field being modeled."
    },
    "scenarios": {
      "items": {
        "$ref": "#/$defs/ExploreScenario"
      },
      "type": "array",
      "maxItems": 2,
      "minItems": 2,
      "title": "Scenarios",
      "description": "A list of the field level simulations for modeling GHG outcomes, including one baseline scenario and one practice change scenario."
    },
    "optional_ghg_boundaries": {
      "items": {
        "$ref": "#/$defs/OptionalGHGBoundaryEnum"
      },
      "type": "array",
      "uniqueItems": true,
      "title": "Optional GHG Boundaries (deprecated)",
      "description": "A list of optional GHG boundaries to include in the results. Defaults to an empty list. (deprecated)",
      "default": []
    },
    "conservative_deduction": {
      "type": "number",
      "exclusiveMaximum": 1.0,
      "minimum": 0.0,
      "title": "Conservative Deduction",
      "description": "The conservative deduction represents the amount that the estimated emissions reduction values for each GHG are reduced by,to represent conservative estimates. The conservative deduction applies to the estimated outcome for each GHG/stock. By default,the conservative deduction is 0.0, so estimates are returned without a conservative deduction.",
      "default": 0.0
    },
    "baseline_method": {
      "type": "string",
      "enum": [
        "blended",
        "rotational",
        "matched",
        "climate_matched",
        "climate_matched_rice"
      ],
      "title": "Baseline Method"
    },
    "reporting_information": {
      "$ref": "#/$defs/scenarios_service_schema__schema__ReportingInformation_CropNamesEnum"
    }
  },
  "type": "object",
  "required": [
    "session_name",
    "scenarios",
    "baseline_method",
    "reporting_information"
  ],
  "$defs": {
    "AWDFlood": {
      "properties": {
        "intervention": {
          "$ref": "#/$defs/InterventionEnum",
          "default": "awd_flood"
        },
        "parameters": {
          "anyOf": [
            {
              "$ref": "#/$defs/BaseInterventionParameters"
            },
            {
              "type": "null"
            }
          ]
        }
      },
      "additionalProperties": false,
      "type": "object",
      "title": "AWDFlood"
    },
    "ApplicationAmountTypeEnum": {
      "type": "string",
      "enum": [
        "product",
        "n_rate",
        "s_rate",
        "p_rate",
        "c_rate"
      ],
      "title": "ApplicationAmountTypeEnum",
      "description": "The Application Amount Type represents the fertilizer nutrient corresponding to the fertilizer amount. Select the product option when only the total application amount for a fertilizer product is known. Select a specific nutrient application rate when the fertilizer amount is known for a specific nutrient (ex: select n_rate when the total amount of nitrogen applied to the field is measured)."
    },
    "ApplicationEvent": {
      "properties": {
        "date": {
          "type": "string",
          "title": "Date",
          "description": "Format is \"YYYY-MM-DD\""
        },
        "name": {
          "$ref": "#/$defs/PublicApplicationsEnum",
          "title": "Name",
          "description": "The name of the application. The valid list of applications by type are:\n | Basic Inorganic | N ratio | Percent of N as Nitrate | Percent of N as Urea | Percent of N as Ammonia | Percent of N as Ammonium | Percent of N as Ammonium Bicarbonate | P<sub>2</sub>O<sub>5</sub> ratio | K<sub>2</sub>0 ratio | \n| --------- | --------- | --------- | --------- | --------- | --------- | --------- | --------- | --------- |\n| ammonium_bicarbonate| 17.7| 0.0| 0.0| 0.0| 0.0| 1.0| 0.0| 0.0|\n| ammonium_nitrate| 34.0| 0.5| 0.0| 0.0| 0.5| 0.0| 0.0| 0.0|\n| di_ammonium_phosphate| 18.0| 0.0| 0.0| 0.0| 1.0| 0.0| 46.0| 0.0|\n| tri_ammonium_phosphate_trihydrate| 20.7| 0.0| 0.0| 0.0| 1.0| 0.0| 35.0| 0.0|\n| ammonium_sulfate| 21.0| 0.0| 0.0| 0.0| 1.0| 0.0| 0.0| 0.0|\n| ammonia_aqueous| 20.0| 0.0| 0.0| 1.0| 0.0| 0.0| 0.0| 0.0|\n| monoammonium_phosphate| 11.0| 0.0| 0.0| 0.0| 1.0| 0.0| 48.0| 0.0|\n| urea| 46.0| 0.0| 1.0| 0.0| 0.0| 0.0| 0.0| 0.0|\n| urea_ammonium_nitrate| 30.0| 0.25| 0.5| 0.0| 0.25| 0.0| 0.0| 0.0|\n| ammonia_anhydrous| 82.0| 0.0| 0.0| 1.0| 0.0| 0.0| 0.0| 0.0|\n| calcium_nitrate| 15.5| 1.0| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0|\n| calcium_ammonium_nitrate| 27.0| 0.5| 0.0| 0.0| 0.5| 0.0| 0.0| 0.0|\n| nitrate| 22.6| 1.0| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0|\n| potassium_nitrate| 13.0| 1.0| 0.0| 0.0| 0.0| 0.0| 0.0| 44.0|\n| ammonium_polyphosphate| 11.0| 0.0| 0.0| 0.0| 1.0| 0.0| 37.0| 0.0|\n| sulfate| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0|\n| phosphate| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0| 74.7| 0.0|\n| npk_28_12_12| 28.0| 0.0| 0.0| 0.0| 1.0| 0.0| 12.0| 12.0|\n| urea_ammonium_sulfate| 38.0| 0.0| 0.67| 0.0| 0.33| 0.0| 0.0| 0.0|\n| urea_ammonium_nitrate_28| 28.0| 0.25| 0.5| 0.0| 0.25| 0.0| 0.0| 0.0|\n| urea_ammonium_nitrate_32| 32.0| 0.25| 0.5| 0.0| 0.25| 0.0| 0.0| 0.0|\n| potassium_chloride| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0| 60.0|\n| sulfonitrate| 26.0| 0.27| 0.0| 0.0| 0.73| 0.0| 0.0| 0.0|\n| microessentials_s10| 12.0| 0.0| 0.0| 0.0| 1.0| 0.0| 40.0| 0.0|\n| microessentials_s15| 13.0| 0.0| 0.0| 0.0| 1.0| 0.0| 33.0| 0.0|\n| microessentials_sz| 12.0| 0.0| 0.0| 0.0| 1.0| 0.0| 40.0| 0.0|\n| ammonium_thiosulfate| 12.0| 0.0| 0.0| 0.0| 1.0| 0.0| 0.0| 0.0|\n| potassium_sulfate| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0| 53.0|\n| single_superphosphate| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0| 20.0| 0.0|\n| triple_superphosphate| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0| 46.0| 0.0|\n| crystal_green| 5.0| 0.0| 0.0| 0.0| 1.0| 0.0| 28.0| 0.0|\n| npk_20_0_24| 20.0| 0.5| 0.0| 0.0| 0.5| 0.0| 0.0| 24.0|\n| yaramila_complex| 12.0| 0.42| 0.0| 0.0| 0.58| 0.0| 11.0| 18.0|\n| ammo_31| 30.7| 0.0| 0.4| 0.0| 0.6| 0.0| 0.0| 0.0|\n| cropmaster_15| 14.8| 0.0| 0.0| 0.0| 1.0| 0.0| 10.0| 10.0|\n| croplex| 12.0| 0.0| 0.0| 0.0| 1.0| 0.0| 40.0| 0.0|\n| npk_15_15_15| 15.0| 0.0| 0.13| 0.0| 0.87| 0.0| 15.0| 15.0|\n| lime| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0|\n| urea_ammonium_phosphate| 34.0| 0.0| 0.88| 0.0| 0.12| 0.0| 17.0| 0.0|\n| ammonium_polyphosphate_10_34_0| 10.0| 0.0| 0.0| 0.0| 1.0| 0.0| 34.0| 0.0|\n| ammonium_phosphate_sulfate| 16.0| 0.0| 0.0| 0.0| 1.0| 0.0| 20.0| 0.0|\n| hakaphos_13_40_13| 13.0| 0.0| 0.31| 0.0| 0.69| 0.0| 40.0| 13.0|\n\n | EENF Inorganic | \n| --------- |\n| entec_26|\n| entec_46|\n| esn|\n| nexen_46|\n| nitamin_nfusion|\n| osmocote_classic|\n| superu|\n| urea_formaldehyde|\n| urea_neem_coated|\n| urea_polymer_coated|\n| urea_sulfer_coated|\n\n | Organic | C:N Ratio | N Ratio | \n| --------- | --------- | --------- |\n| alfalfa_meal| 16.9842| 4.0|\n| blood_meal| 3.55626| 12.0|\n| bone_meal| 5.16883| 2.0|\n| fish_meal| 5.06011| 11.0|\n| hay_grass| 32.0| 1.5|\n| hay_legume| 16.8889| 3.0|\n| manure_beef_liquid| 15.5109| 1.5|\n| manure_beef_solid| 15.5109| 1.5|\n| manure_compost| 15.0| 1.5|\n| manure_dairy_liquid| 12.0398| 1.5|\n| manure_dairy_solid| 17.2761| 1.5|\n| manure_guano| 5.28333| 1.2|\n| manure_horse_liquid| 0.0| 0.0|\n| manure_horse_solid| 34.7016| 0.4|\n| manure_pig_liquid| 5.57551| 0.6|\n| manure_pig_solid| 13.0509| 0.6|\n| manure_poultry_liquid| 7.34159| 2.1|\n| manure_poultry_solid| 7.34159| 2.1|\n| manure_sheep_liquid| 21.0894| 0.6|\n| manure_sheep_solid| 13.0212| 0.6|\n| municipal_waste| 18.2066| 5.0|\n| peat| 32.6087| 2.3|\n| seaweed_fresh| 10.0| 1.0|\n| seaweed_ground| 16.0263| 1.0|\n| soybean_meal| 7.0| 7.0|\n| straw| 66.0| 0.5|\n"
        },
        "amount": {
          "type": "number",
          "exclusiveMinimum": 0.0,
          "title": "Rate",
          "description": "Rate of the application. Unit depends on amount_type"
        },
        "nutrient_product_type": {
          "$ref": "#/$defs/NutrientProductTypeEnum"
        },
        "amount_type": {
          "$ref": "#/$defs/ApplicationAmountTypeEnum"
        },
        "depth": {
          "type": "number",
          "minimum": 0.0,
          "title": "Depth",
          "description": "The depth of the application in centimeters. Must be greater than zero when the application method is inject, subsurface or fertigation_subsurface_drip.",
          "default": 0.0
        },
        "liq_dry": {
          "$ref": "#/$defs/LiquidDryEnum",
          "default": "dry"
        },
        "application_method": {
          "$ref": "#/$defs/ApplicationMethodEnum",
          "default": "broadcast"
        },
        "additives": {
          "anyOf": [
            {
              "items": {
                "$ref": "#/$defs/PublicAdditivesEnum"
              },
              "type": "array",
              "maxItems": 2
            },
            {
              "type": "null"
            }
          ],
          "title": "Additives",
          "description": "Chemicals added to fertilizer products to reduce nitrogen losses to the environment and increase nitrogen availability to crops. Supported additives are shown in the table below. Additives are not allowed when type = eenf_inorganic or application_method = fertigation.\n\n | Additives | \n| --------- |\n| agrotain|\n| agrotain_plus|\n| anvol|\n| centuro|\n| n_serve|\n| nitrification_inhibitor|\n| nutrisphere|\n| urease_inhibitor|\n| urease_nitrification_dual_inhibitor|\n"
        },
        "c_n": {
          "anyOf": [
            {
              "type": "number",
              "minimum": 0.0
            },
            {
              "type": "null"
            }
          ],
          "title": "C:N Ratio",
          "description": "The carbon to nitrogen ratio of the organic amendment."
        },
        "organic_n": {
          "anyOf": [
            {
              "type": "number",
              "minimum": 0.0
            },
            {
              "type": "null"
            }
          ],
          "title": "Organic N content",
          "description": "kgN/ha"
        },
        "nh4": {
          "anyOf": [
            {
              "type": "number",
              "minimum": 0.0
            },
            {
              "type": "null"
            }
          ],
          "title": "Ammonium N content",
          "description": "kgN/ha"
        },
        "no3": {
          "anyOf": [
            {
              "type": "number",
              "minimum": 0.0
            },
            {
              "type": "null"
            }
          ],
          "title": "Nitrate N content",
          "description": "kgN/ha"
        },
        "urea": {
          "anyOf": [
            {
              "type": "number",
              "minimum": 0.0
            },
            {
              "type": "null"
            }
          ],
          "title": "Urea N content",
          "description": "kgN/na"
        },
        "area_unit": {
          "$ref": "#/$defs/AreaUnitEnum",
          "default": "hectare"
        },
        "rate_unit": {
          "anyOf": [
            {
              "$ref": "#/$defs/scenarios_service_schema__public__units__MassUnitEnum"
            },
            {
              "$ref": "#/$defs/VolumeUnitEnum"
            }
          ],
          "title": "Rate Unit",
          "default": "kilogram"
        },
        "water_amount": {
          "anyOf": [
            {
              "type": "number",
              "minimum": 0.0
            },
            {
              "type": "null"
            }
          ],
          "title": "Water Amount",
          "description": "Millimeters of water applied during a fertilizer application (ex: from a rain gauge). Required if the application method is any of the fertigation methods, not allowed otherwise."
        }
      },
      "additionalProperties": false,
      "type": "object",
      "required": [
        "date",
        "name",
        "amount",
        "nutrient_product_type",
        "amount_type"
      ],
      "title": "ApplicationEvent",
      "description": "The applicationEvent contains data about a single fertilizer or nutrient management event on a field. The applied product type (ex: basic synthetic fertilizer, organic fertilizer) is specified for each event, along with the application date, method, amount and rate applied.\n\n    - Basic Inorganic: inorganic fertilizer products that are not enhanced-efficiency nitrogen fertilizers\n    - EENF Inorganic: enhanced efficiency nitrogen fertilizer products that are designed to reduce nitrogen losses to the environment and increase nitrogen availability to crops\n    - Organic: organic fertilizer products (manure, mulch, compost, etc.)\n\n    | nutrient_product_type | valid application_method choices |\n    | --------------------- | -------------------------------- |\n    | basic_inorganic       | broadcast, subsurface, fertigation_furrow, fertigation_sprinkler, fertigation_drip, fertigation_subsurface_drip |\n    | eenf_inorganic        | broadcast, subsurface, fertigation_furrow, fertigation_sprinkler, fertigation_drip, fertigation_subsurface_drip |\n    | organic               | broadcast, inject |\n\n    **Currently \"lime\", \"potassium_chloride\", \"granite_dust\", \"manure_horse_liquid\" and \"cottonseed_hull_ash\" events are accepted, but the values are not used by DNDC for outcomes calculations. This feature will be added in the future.**\n\n    "
    },
    "ApplicationMethodEnum": {
      "type": "string",
      "enum": [
        "broadcast",
        "fertigation_furrow",
        "fertigation_sprinkler",
        "fertigation_drip",
        "fertigation_subsurface_drip",
        "inject",
        "subsurface"
      ],
      "title": "ApplicationMethodEnum",
      "description": "The `applicationMethod` specified how a fertilizer is applied to the soil. The following options are supported:\n\n- `broadcast` - application is spread across the soil surface\n- `subsurface` - application is applied below the soil surface, at the depth specified. *(The `depth` input is required for `subsurface` applications.)*\n- `inject` - application is injected directly into the soil. *(The `depth` input is required for `inject` applications.)*\n\n- `fertigation_furrow` - fertilizer product is applied to the field with water at a single point during the day. *(The `water_amount` input is required for `fertigation_furrow` applications.)* Note: plant accessible water is 0.15x `water_amount`.\n- `fertigation_sprinkler` -  fertilizer product is applied to the surface of the field with water, distributed over half a day. *(The `water_amount` input is required for `fertigation_sprinkler` applications.)* Note: plant accessible water is 0.15x `water_amount`.\n- `fertigation_drip` - fertilizer product is applied to the surface of the field with water, distributed equally over the entire day. *(The `water_amount` input is required for `fertigation_drip` applications.) Note: plant accessible water is 0.75x `water_amount`.\n- `fertigation_subsurface_drip` - fertilizer product is applied below the surface of the field with water at a depth of 8-10cm, distributed equally over the entire day. *(The `water_amount` input is required for `fertigation_subsurface_drip` applications.) Note: plant accessible water is 1.0x `water_amount`."
    },
    "AreaUnitEnum": {
      "type": "string",
      "enum": [
        "square_meter",
        "hectare",
        "acre"
      ],
      "title": "AreaUnitEnum"
    },
    "AutoIrrigationEvent": {
      "properties": {
        "start_date": {
          "type": "string",
          "title": "Start Date",
          "description": "Format is \"YYYY-MM-DD\""
        },
        "end_date": {
          "type": "string",
          "title": "End Date",
          "description": "Format is \"YYYY-MM-DD\""
        },
        "method": {
          "$ref": "#/$defs/IrrigationMethodEnum"
        },
        "furrow_percentage": {
          "anyOf": [
            {
              "type": "number",
              "maximum": 1.0,
              "minimum": 0.0
            },
            {
              "type": "null"
            }
          ],
          "title": "Furrow Percentage",
          "description": "Percentage of the field that is furrowed, should only be specified when `method = furrow` (default = 0.95)."
        },
        "depth": {
          "type": "number",
          "minimum": 0.0,
          "title": "Application Depth",
          "description": "The depth of the application in centimeters. Depth must be greater than 0 when subsurface_drip is the irrigation method.",
          "default": 0.0
        }
      },
      "additionalProperties": false,
      "type": "object",
      "required": [
        "start_date",
        "end_date",
        "method"
      ],
      "title": "AutoIrrigationEvent",
      "description": "The `AutoIrrigationEvent` contains information about irrigation that occurs over the course of the growing season. With this event, irrigation is automatically applied over a period of time, for the specified application method. The irrigation amount will be calculated automatically based on the water demand of the crop and climate factors such as weather precipitation, weather method, and index. Use the AutoIrrigation Event when an irrigation event occurs regularly over the cropping season, where the water amount may not be known. For single irrigation events, or events where the specific water amount is available use the `IrrigationEvent`."
    },
    "BaseInterventionParameters": {
      "properties": {},
      "additionalProperties": false,
      "type": "object",
      "title": "BaseInterventionParameters"
    },
    "CoverCrop": {
      "properties": {
        "intervention": {
          "$ref": "#/$defs/InterventionEnum",
          "default": "cover_crop"
        }
      },
      "additionalProperties": false,
      "type": "object",
      "title": "CoverCrop"
    },
    "CropNamesEnum": {
      "type": "string",
      "enum": [
        "corn",
        "wheat_winter",
        "soybean",
        "hay",
        "wheat_spring",
        "barley",
        "oat",
        "alfalfa",
        "grass_annual",
        "sorghum",
        "cotton",
        "rye_spring",
        "potato",
        "rice",
        "peanut",
        "rice_upland",
        "canola",
        "millet",
        "sunflower",
        "dry_bean",
        "corn_silage",
        "tomato",
        "safflower",
        "flax",
        "mustard",
        "radish",
        "sweet_potato",
        "clover",
        "sorghum_silage",
        "rye",
        "vetch",
        "triticale",
        "wheatgrass",
        "pea",
        "turnip",
        "buckwheat",
        "sunn_hemp",
        "lentil",
        "sweet_corn",
        "pop_or_orn_corn",
        "ryegrass",
        "watermelon",
        "teff",
        "pumpkin",
        "sugar_beet",
        "switchgrass",
        "miscanthus",
        "wheat_durum",
        "orchardgrass",
        "faba_bean",
        "premium_cover_crop_mix",
        "hemp",
        "camelina",
        "speltz",
        "basic_cover_crop",
        "pasture",
        "alternative_single_species_cover_crop",
        "legume_cover_crop",
        "traditional_blend_cover_crop",
        "alternative_blend_cover_crop"
      ],
      "title": "CropNamesEnum"
    },
    "CroppingEvent": {
      "properties": {
        "start_date": {
          "type": "string",
          "title": "Start Date",
          "description": "Format is \"YYYY-MM-DD\". Represents the date the crop is planted"
        },
        "end_date": {
          "type": "string",
          "title": "End Date",
          "description": "Format is \"YYYY-MM-DD. Represents the date the crop is killed. In the model the plant is terminated and remaining aboveground biomass (leaf/stem/grain, remaining) tracked as residues and converted to surface litter, root biomass becomes residue/litter that is distributed among the the top ~20 cm of soil layers.\""
        },
        "name": {
          "$ref": "#/$defs/CropNamesEnum",
          "title": "Name"
        },
        "reductions": {
          "items": {
            "$ref": "#/$defs/ReductionEvent"
          },
          "type": "array",
          "title": "Reduction Events",
          "description": "\nThe `ReductionEvent` contains information about how and when a crop is mechanically harvested, mowed or cut. A `cropping` event can contain multiple reductions. Choose the reduction method that is most applicable for the crop type grown.\n\nFor crops that are not mechanically reduced (such as crops terminated by herbicide, or winter-killed), omit any `ReductionEvents`, as the death of the crop is captured by the `end date` of the `croppingEvent`.\n\n| Reduction Type | Description |\n| -------------- | ----------- |\n| grain_harvest  | A cutting event that cuts the entire plant aboveground. All grain and 5% of leaf and stem biomass are removed from the field. The remaining 95% of leaf and stem biomass is applied back to the field as green mulch.  |\n| silage_harvest | A cutting event that cuts the entire plant aboveground. All grain and 95% of leaf and stem biomass are removed from the field. The remaining 5% of leaf and stem biomass is applied back to the field as green mulch.  |\n| mow_50         | A cutting event that cuts all grain and 50% of leaf and stem and applies it back to the field as green mulch. |\n| hay_50         | A cutting event that cuts all grain and 50% of leaf and stem and removes it from the field.|\n| mow_75         | A cutting event that cuts all grain and 75% of leaf and stem and applies it back to the field as green mulch. |\n| hay_75         | A cutting event that cuts all grain and 75% of leaf and stem and removes it from the field. |\n| mow_100        | A cutting event that cuts all aboveground plant material (grain, leaf, and stem) and applies it back to the field as green mulch. |\n| hay_100        | A cutting event that cuts all aboveground plant material (grain, leaf, and stem) and removes it from the field. |\n\nIf the available default Reduction Events do not serve your use case, a customized Reduction Event can be defined using the `CustomReductionEvent` schema.  The `type` and `custom` fields are mutually exclusive.  One of `type` or `custom` must be specified.\n\nFor a given crop biomass category (grain, leaf, stem, or root), the sum of the fractional biomass removed or returned to the field as residue must not be greater than 1. For example, a custom Reduction Event that removes all grain, leaf, and stem (i.e. a silage harvest) would be specified as follows:\n- frac_grain_removed = 1\n- frac_grain_residue = 0\n- frac_leaf_removed = 1\n- frac_leaf_residue = 0\n- frac_stem_removed = 1\n- frac_stem_residue = 0\n- frac_root_removed = 0\n- frac_root_residue = 0\n\nAll root crops (potatoes, sugar beet, etc.) classify the traditionally consumed tuber part (e.g., the potato itself) as a 'grain' in DNDC, so therefore a DNDC harvest event for tubers should use the following. Leaf and stem can be treated as more variable depending on how the above ground leaf material is handled by the client.\n- frac_grain_removed = 1\n- frac_grain_residue = 0\n- frac_root_removed = 0\n- frac_root_residue = 1\n"
        },
        "plant_density": {
          "anyOf": [
            {
              "type": "number",
              "maximum": 600.0,
              "minimum": 0.0
            },
            {
              "type": "null"
            }
          ],
          "title": "Plant Density",
          "description": "The number of plants per square meter. Can only be specified for `rice_paddy_short` and `rice_paddy_long`. Only supported by DNDC versions 12.3 and up."
        }
      },
      "additionalProperties": false,
      "type": "object",
      "required": [
        "start_date",
        "end_date",
        "name"
      ],
      "title": "CroppingEvent",
      "description": "The `CroppingEvent` contains information about a crop growing on a field, including the type of crop, planting and harvest dates, and when applicable the harvest/reduction methods.\n\nCropping events can be used to represent commodity crops, cover crops and pasture cover."
    },
    "CustomFertilizer": {
      "properties": {
        "nitrate_percent": {
          "type": "number",
          "maximum": 100.0,
          "minimum": 0.0,
          "title": "Nitrate Percent",
          "default": 0
        },
        "ammonia_percent": {
          "type": "number",
          "maximum": 100.0,
          "minimum": 0.0,
          "title": "Ammonia Percent",
          "default": 0
        },
        "ammonium_percent": {
          "type": "number",
          "maximum": 100.0,
          "minimum": 0.0,
          "title": "Ammonium Percent",
          "default": 0
        },
        "ammonium_bicarbonate_percent": {
          "type": "number",
          "maximum": 100.0,
          "minimum": 0.0,
          "title": "Ammonium Bicarbonate Percent",
          "default": 0
        },
        "urea_percent": {
          "type": "number",
          "maximum": 100.0,
          "minimum": 0.0,
          "title": "Urea Percent",
          "default": 0
        },
        "sulfate_percent": {
          "type": "number",
          "maximum": 100.0,
          "minimum": 0.0,
          "title": "Sulfate Percent",
          "default": 0
        },
        "phosphate_percent": {
          "type": "number",
          "maximum": 100.0,
          "minimum": 0.0,
          "title": "Phosphate Percent",
          "default": 0
        },
        "liquid_density": {
          "anyOf": [
            {
              "type": "number",
              "exclusiveMinimum": 0.0
            },
            {
              "type": "null"
            }
          ],
          "title": "Liquid Density",
          "description": "Required if the custom blend is liquid. Otherwise, it is considered solid."
        },
        "mass_liquid_density_unit": {
          "anyOf": [
            {
              "$ref": "#/$defs/scenarios_service_schema__public__units__MassUnitEnum"
            },
            {
              "type": "null"
            }
          ],
          "title": "Mass Liquid Density Unit",
          "description": "Required if the custom blend is liquid. Otherwise, it is considered solid."
        }
      },
      "additionalProperties": false,
      "type": "object",
      "title": "CustomFertilizer",
      "description": "The CustomFertilizer object allows customers to specify fertilizers and fertilizer blends that do not already exist in Regrow's predefined fertilizer types. To use this users will need to provide the nutrient breakdown and the liquid density of the product (in the event it's a liquid).\n\nTo use, set the parent fertilizer \"name\" to \"custom\"."
    },
    "CustomOrganicAmendment": {
      "properties": {
        "organic_n_percent": {
          "type": "number",
          "maximum": 100.0,
          "exclusiveMinimum": 0.0,
          "title": "Organic N Percent",
          "default": 0
        },
        "nitrate_percent": {
          "type": "number",
          "maximum": 100.0,
          "minimum": 0.0,
          "title": "Nitrate Percent",
          "default": 0
        },
        "ammonium_percent": {
          "type": "number",
          "maximum": 100.0,
          "minimum": 0.0,
          "title": "Ammonium Percent",
          "default": 0
        },
        "urea_percent": {
          "type": "number",
          "maximum": 100.0,
          "minimum": 0.0,
          "title": "Urea Percent",
          "default": 0
        },
        "carbon_percent": {
          "type": "number",
          "maximum": 100.0,
          "exclusiveMinimum": 0.0,
          "title": "Carbon Percent"
        },
        "liquid_density": {
          "anyOf": [
            {
              "type": "number",
              "exclusiveMinimum": 0.0
            },
            {
              "type": "null"
            }
          ],
          "title": "Liquid Density",
          "description": "Required if the custom blend is liquid. Otherwise, it is considered solid."
        },
        "mass_liquid_density_unit": {
          "anyOf": [
            {
              "$ref": "#/$defs/scenarios_service_schema__public__units__MassUnitEnum"
            },
            {
              "type": "null"
            }
          ],
          "title": "Mass Liquid Density Unit",
          "description": "Required if the custom blend is liquid. Otherwise, it is considered solid."
        }
      },
      "additionalProperties": false,
      "type": "object",
      "required": [
        "carbon_percent"
      ],
      "title": "CustomOrganicAmendment"
    },
    "CustomReductionEvent": {
      "properties": {
        "frac_grain_removed": {
          "type": "number",
          "maximum": 1.0,
          "minimum": 0.0,
          "title": "Frac Grain Removed",
          "description": "The fraction of crop grain biomass cut and removed from the field",
          "default": 0.0
        },
        "frac_grain_residue": {
          "type": "number",
          "maximum": 1.0,
          "minimum": 0.0,
          "title": "Frac Grain Residue",
          "description": "The fraction of crop grain biomass cut and left on the field",
          "default": 0.0
        },
        "frac_leaf_removed": {
          "type": "number",
          "maximum": 1.0,
          "minimum": 0.0,
          "title": "Frac Leaf Removed",
          "description": "The fraction of crop leaf biomass cut and removed from the field",
          "default": 0.0
        },
        "frac_leaf_residue": {
          "type": "number",
          "maximum": 1.0,
          "minimum": 0.0,
          "title": "Frac Leaf Residue",
          "description": "The fraction of crop leaf biomass cut and left on the field",
          "default": 0.0
        },
        "frac_stem_residue": {
          "type": "number",
          "maximum": 1.0,
          "minimum": 0.0,
          "title": "Frac Stem Residue",
          "description": "The fraction of crop stem biomass cut and left on the field",
          "default": 0.0
        },
        "frac_stem_removed": {
          "type": "number",
          "maximum": 1.0,
          "minimum": 0.0,
          "title": "Frac Stem Removed",
          "description": "The fraction of crop stem biomass cut and removed from the field",
          "default": 0.0
        },
        "frac_root_removed": {
          "type": "number",
          "maximum": 1.0,
          "minimum": 0.0,
          "title": "Frac Root Removed",
          "description": "The fraction of crop root biomass cut and removed from the field",
          "default": 0.0
        },
        "frac_root_residue": {
          "type": "number",
          "maximum": 1.0,
          "minimum": 0.0,
          "title": "Frac Root Residue",
          "description": "The fraction of crop root biomass cut and left on the field",
          "default": 0.0
        }
      },
      "additionalProperties": false,
      "type": "object",
      "title": "CustomReductionEvent",
      "description": "The `CustomReductionEvent` contains information about the plant biomass removed/retained on the field after a mechanical reduction. Use the `CustomReductionEvent` when none of the available reduction methods are applicable for the crop type."
    },
    "Events": {
      "properties": {
        "irrigation": {
          "items": {
            "anyOf": [
              {
                "$ref": "#/$defs/IrrigationEvent"
              },
              {
                "$ref": "#/$defs/AutoIrrigationEvent"
              }
            ]
          },
          "type": "array",
          "title": "irrigation",
          "description": "A list of IrrigationEvent or AutoIrrigationEvents. The dates of these events cannot overlap.",
          "default": []
        },
        "till": {
          "items": {
            "$ref": "#/$defs/TillEvent"
          },
          "type": "array",
          "title": "Till",
          "default": []
        },
        "flood": {
          "items": {
            "$ref": "#/$defs/FloodEvent"
          },
          "type": "array",
          "title": "Flood",
          "default": []
        },
        "cropping": {
          "items": {
 

# --- truncated at 32 KB (86 KB total) ---
# Full source: https://artifacts.apis.io/regrow-ag/json-schema/regrow-ag-explore-apiinput-schema.json

Work with this as data

Every JSON Schema here is available over the APIs.io API and to AI agents over MCP.

MCP server

One button, every client — Claude, Cursor, VS Code and the rest.

https://apis.io/mcp

Tools for schemas

4 MCP tools reach this
  • find_json_schemasBrowse and filter every JSON Schema in the catalog.
  • apis_io_searchSTART HERE — APIs, providers and tags for one query, each with its total.
  • resolveTurn a domain, URL or GitHub org into the provider it belongs to.
  • find_cohortsEvery scored population of providers in the catalog.
All 92 tools →

Call it yourself

curl for this page
This JSON Schema
curl "https://apis.io/api/v1/json-schemas/regrow-ag-explore-apiinput"
All schemas
curl "https://apis.io/api/v1/json-schemas?limit=25"

Calls without X-API-Key need no key. Calls with it need a paid plan — get a key.

Get an API key

Free tier, no form to fill in. Signing in shares your email address with us — we store it to create your key and to recognise you if you sign in with another provider. See our Privacy Policy and Terms.

A second provider on the same verified email joins the account you already have.