QuarterlyApportionedEmissionsDTO

QuarterlyApportionedEmissionsDTO schema from Streaming Services OpenAPI Specification

GovernmentEnvironmentalOpen DataAir QualityWater QualityHazardous WasteComplianceEmissions

Properties

Name Type Description
stateCode string Two letter abbreviation for the State.
facilityName string The name given by the owners and operators to a facility
facilityId number The Facility ID code assigned by the Department of Energy's Energy Information Administration. The Energy Information Administration Plant ID code is also referred to as the "ORIS code", "ORISPL code"
unitId string Unique identifier for each unit at a facility.
unit_id number Database id for each unit at a facility.
unitType string Type of unit or boiler.
associatedStacks string Stacks associated with the unit.
primaryFuelInfo string The primary type of fuel combusted by the unit.
secondaryFuelInfo string The secondary type of fuel(s) combusted by the unit.
so2ControlInfo string Method or equipment used by the combustion unit to minimize SO2 emissions.
pmControlInfo string Method or equipment used by the combustion unit to minimize PM emissions.
noxControlInfo string Method or equipment used by the combustion unit to minimize NOx emissions.
hgControlInfo string Method or equipment used by the combustion unit to minimize Hg emissions.
programCodeInfo string Statutory or regulatory based options for tracking and reducing air pollution emissions.
grossLoad number Electrical generation in MW produced by combusting a given heat input of fuel.
steamLoad number Rate of steam pressure generated by a unit or source produced by combusting a given heat input of fuel. (1000 lb/hr)
so2Mass number SO2 Mass Emissions (short tons)
so2Rate number Average SO2 hourly emissions rate (lbs/mmBtu)
noxMass number NOx mass emissions (short tons)
noxRate number The average rate of NOx emissions (lbs/mmBtu)
co2Mass number CO2 mass emissions (short tons)
co2Rate number Average CO2 hourly emissions rate (short tons/mmBtu)
heatInput number Quantity of heat in mmBtu calculated by multiplying the quantity of fuel by the fuels heat content.
heatInputMeasureFlg string Describes how the Heat Input values were determined.
year number The calendar year during which activity occurred.
quarter number Calendar quarter in which activity occurred.
sumOpTime number Sum of operating time for the time interval
countOpTime number Number of hours during which the unit operated for this time interval
View JSON Schema on GitHub

JSON Schema

cam-streaming-quarterly-apportioned-emissions-dto-schema.json Raw ↑
{
  "$schema": "https://json-schema.org/draft/2020-12/schema",
  "$id": "https://raw.githubusercontent.com/api-evangelist/epa/refs/heads/main/json-schema/cam-streaming-quarterly-apportioned-emissions-dto-schema.json",
  "title": "QuarterlyApportionedEmissionsDTO",
  "description": "QuarterlyApportionedEmissionsDTO schema from Streaming Services OpenAPI Specification",
  "type": "object",
  "properties": {
    "stateCode": {
      "type": "string",
      "description": "Two letter abbreviation for the State.",
      "example": "AK"
    },
    "facilityName": {
      "type": "string",
      "description": "The name given by the owners and operators to a facility",
      "example": "Barry"
    },
    "facilityId": {
      "type": "number",
      "description": "The Facility ID code assigned by the Department of Energy's Energy Information Administration. The Energy Information Administration Plant ID code is also referred to as the \"ORIS code\", \"ORISPL code\", \"Facility ID\", or \"Facility code\", among other names. If a Plant ID code has not been assigned by the Department of Energy's Energy Information Administration, then plant code means a code beginning with \"88\" assigned by the EPA's Clean Air Markets Division for electronic reporting.",
      "example": 3
    },
    "unitId": {
      "type": "string",
      "description": "Unique identifier for each unit at a facility.",
      "example": 5
    },
    "unit_id": {
      "type": "number",
      "description": "Database id for each unit at a facility.",
      "example": 5
    },
    "unitType": {
      "type": "string",
      "description": "Type of unit or boiler.",
      "example": "Tangentially-fired"
    },
    "associatedStacks": {
      "type": "string",
      "description": "Stacks associated with the unit.",
      "example": "CS001"
    },
    "primaryFuelInfo": {
      "type": "string",
      "description": "The primary type of fuel combusted by the unit.",
      "example": "Coal"
    },
    "secondaryFuelInfo": {
      "type": "string",
      "description": "The secondary type of fuel(s) combusted by the unit.",
      "example": "Diesel Oil"
    },
    "so2ControlInfo": {
      "type": "string",
      "description": "Method or equipment used by the combustion unit to minimize SO2 emissions.",
      "example": "Wet Limestone"
    },
    "pmControlInfo": {
      "type": "string",
      "description": "Method or equipment used by the combustion unit to minimize PM emissions.",
      "example": "Electrostatic Precipitator"
    },
    "noxControlInfo": {
      "type": "string",
      "description": "Method or equipment used by the combustion unit to minimize NOx emissions.",
      "example": "Selective Catalytic Reduction, Low NOx Burner Technology w/ Separated OFA"
    },
    "hgControlInfo": {
      "type": "string",
      "description": "Method or equipment used by the combustion unit to minimize Hg emissions.",
      "example": "Catalyst (gold, palladium, or other) used to oxidize mercury"
    },
    "programCodeInfo": {
      "type": "string",
      "description": "Statutory or regulatory based options for tracking and reducing air pollution emissions.",
      "example": "ARP,CSNOX,CSSO2G2,MATS"
    },
    "grossLoad": {
      "type": "number",
      "description": "Electrical generation in MW produced by combusting a given heat input of fuel.",
      "example": 900773
    },
    "steamLoad": {
      "type": "number",
      "description": "Rate of steam pressure generated by a unit or source produced by combusting a given heat input of fuel. (1000 lb/hr)",
      "example": 153647
    },
    "so2Mass": {
      "type": "number",
      "description": "SO2 Mass Emissions (short tons)",
      "example": 91.2
    },
    "so2Rate": {
      "type": "number",
      "description": "Average SO2 hourly emissions rate (lbs/mmBtu)",
      "example": 0.011
    },
    "noxMass": {
      "type": "number",
      "description": "NOx mass emissions (short tons)",
      "example": 367.9
    },
    "noxRate": {
      "type": "number",
      "description": "The average rate of NOx emissions (lbs/mmBtu)",
      "example": 0.376
    },
    "co2Mass": {
      "type": "number",
      "description": "CO2 mass emissions (short tons)",
      "example": 150.8
    },
    "co2Rate": {
      "type": "number",
      "description": "Average CO2 hourly emissions rate (short tons/mmBtu)",
      "example": 0.103
    },
    "heatInput": {
      "type": "number",
      "description": "Quantity of heat in mmBtu calculated by multiplying the quantity of fuel by the fuels heat content.",
      "example": 1470.2
    },
    "heatInputMeasureFlg": {
      "type": "string",
      "description": "Describes how the Heat Input values were determined.",
      "example": "string"
    },
    "year": {
      "type": "number",
      "description": "The calendar year during which activity occurred.",
      "example": 2020
    },
    "quarter": {
      "type": "number",
      "description": "Calendar quarter in which activity occurred.",
      "example": 4
    },
    "sumOpTime": {
      "type": "number",
      "description": "Sum of operating time for the time interval",
      "example": 1795.25
    },
    "countOpTime": {
      "type": "number",
      "description": "Number of hours during which the unit operated for this time interval",
      "example": 1797
    }
  },
  "required": [
    "stateCode",
    "facilityName",
    "unitId",
    "unit_id",
    "unitType",
    "associatedStacks",
    "primaryFuelInfo",
    "secondaryFuelInfo",
    "so2ControlInfo",
    "pmControlInfo",
    "noxControlInfo",
    "hgControlInfo",
    "programCodeInfo",
    "year",
    "quarter"
  ]
}

Work with this as data

Every JSON Schema here is available over the APIs.io API and to AI agents over MCP.

MCP server

One button, every client — Claude, Cursor, VS Code and the rest.

https://apis.io/mcp

Tools for schemas

4 MCP tools reach this
  • find_json_schemasBrowse and filter every JSON Schema in the catalog.
  • apis_io_searchSTART HERE — APIs, providers and tags for one query, each with its total.
  • resolveTurn a domain, URL or GitHub org into the provider it belongs to.
  • find_cohortsEvery scored population of providers in the catalog.
All 92 tools

Call it yourself

curl for this page
This JSON Schema
curl "https://apis.io/api/v1/json-schemas/cam-streaming-quarterly-apportioned-emissions-dto"
All schemas
curl "https://apis.io/api/v1/json-schemas?limit=25"

Discovery needs no key. Ratings and market analysis are Pro.

Get an API key

Free tier, no email required.

A second provider on the same verified email joins the account you already have.