Dell Servers Set Boot Device and Reset

arazzo: 1.0.1
info:
  title: Dell Servers Set Boot Device and Reset
  summary: Read a system, set a pending BIOS boot override, then power-cycle it.
  description: >-
    A common one-time-boot orchestration for Dell PowerEdge servers over the
    iDRAC Redfish API. The workflow reads the computer system to confirm it
    exists and capture its current power state, writes a pending BIOS attribute
    that selects the desired boot source, and then issues a reset action to
    apply the change on the next boot. Because this iDRAC description exposes
    boot configuration through the BIOS pending-settings resource rather than a
    dedicated boot-override action, the boot target is adapted onto a BIOS
    attribute name-value pair. Every step spells out its request inline so the
    flow can be read and executed without opening the underlying OpenAPI
    description.
  version: 1.0.0
sourceDescriptions:
- name: idracRedfish
  url: ../openapi/dell-servers-idrac-redfish-openapi.yml
  type: openapi
workflows:
- workflowId: set-boot-and-reset
  summary: Read a system, set a pending BIOS boot source, then reset it.
  description: >-
    Confirms the target system, sets a pending BIOS boot attribute, and issues
    a reset so the override takes effect on the next boot.
  inputs:
    type: object
    required:
    - systemId
    - bootAttributeName
    - bootAttributeValue
    - resetType
    properties:
      systemId:
        type: string
        description: Computer system identifier, typically System.Embedded.1.
      bootAttributeName:
        type: string
        description: >-
          BIOS attribute name that selects the boot source, for example
          SetBootOrderEn or BootSeqRetry.
      bootAttributeValue:
        type: string
        description: Desired value for the BIOS boot attribute.
      resetType:
        type: string
        description: >-
          Reset action to apply the change, for example ForceRestart,
          GracefulRestart, or PowerCycle.
  steps:
  - stepId: getSystem
    description: >-
      Read the computer system to confirm it exists and capture its current
      power state before changing boot configuration.
    operationId: getSystem
    parameters:
    - name: SystemId
      in: path
      value: $inputs.systemId
    successCriteria:
    - condition: $statusCode == 200
    outputs:
      currentPowerState: $response.body#/PowerState
      biosVersion: $response.body#/BiosVersion
  - stepId: setBootAttribute
    description: >-
      Set the pending BIOS attribute that selects the boot source. The change
      is staged and applied on the next system reboot.
    operationId: updateBiosSettings
    parameters:
    - name: SystemId
      in: path
      value: $inputs.systemId
    requestBody:
      contentType: application/json
      payload:
        Attributes:
          $inputs.bootAttributeName: $inputs.bootAttributeValue
    successCriteria:
    - condition: $statusCode == 200
    outputs:
      pendingApplied: $statusCode
  - stepId: resetSystem
    description: >-
      Issue the reset action so the pending BIOS boot attribute is applied on
      the next boot.
    operationId: resetSystem
    parameters:
    - name: SystemId
      in: path
      value: $inputs.systemId
    requestBody:
      contentType: application/json
      payload:
        ResetType: $inputs.resetType
    successCriteria:
    - condition: $statusCode == 204
    outputs:
      resetStatus: $statusCode
  outputs:
    priorPowerState: $steps.getSystem.outputs.currentPowerState
    resetStatus: $steps.resetSystem.outputs.resetStatus