Every API here is available over the APIs.io API and to AI agents over MCP.
openapi: 3.2.0
info:
title: Webex Call Settings For Me API
version: 1.0.0
description: 'Operations tagged Call Settings For Me across 2 of this provider''s published API definitions: webex-call-settings-for-me-api-openapi.yml, webex-cloud-calling-openapi.json. Each path carries the servers of the definition it was published in.'
x-provenance:
method: harvested
authored_by: Cisco Webex
harvested_by: API Evangelist
harvested_on: '2026-08-19'
first_party: true
note: Published by Cisco. Retrieved unmodified except for this x-provenance block.
provider_published: true
derived_view: Per-tag view of webex-cloud-calling-openapi.json, the provider's source document. Operations and schemas are the provider's, unmodified; only the partition is ours.
derived_from: webex-cloud-calling-openapi.json
operation_coverage: 65/65
x-evidence:
- type: source
url: https://github.com/webex/webex-openapi-specs/blob/main/public-spec/webex-cloud-calling.json
- type: raw
url: https://raw.githubusercontent.com/webex/webex-openapi-specs/main/public-spec/webex-cloud-calling.json
tags:
- name: Call Settings For Me
paths:
/telephony/config/people/me/settings/availablePreferredAnswerEndpoints:
get:
responses:
'200':
description: OK
headers: {}
content:
application/json:
schema:
$ref: '#/components/schemas/preferredAnswerEndpointInformation'
example:
endpoints:
- id: Y2lzY29z...
type: DEVICE
name: Cisco 8865 (Phone in reception area)
isPreferredAnswerEndpoint: false
- id: Y2lzY29b...
type: APPLICATION
name: Webex Desktop Application
isPreferredAnswerEndpoint: true
'400':
description: 'Bad Request: The request was invalid or cannot be otherwise served. An accompanying error message will explain further.'
'401':
description: 'Unauthorized: Authentication credentials were missing or incorrect.'
'403':
description: 'Forbidden: The request is understood, but it has been refused or access is not allowed.'
'404':
description: 'Not Found: The URI requested is invalid or the resource requested, such as a user, does not exist. Also returned when the requested format is not supported by the requested method.'
'405':
description: 'Method Not Allowed: The request was made to a resource using an HTTP request method that is not supported.'
'409':
description: 'Conflict: The request could not be processed because it conflicts with some established rule of the system. For example, a person may not be added to a room more than once.'
'410':
description: 'Gone: The requested resource is no longer available.'
'415':
description: 'Unsupported Media Type: The request was made to a resource without specifying a media type or used a media type that is not supported.'
'423':
description: 'Locked: The requested resource is temporarily unavailable. A Retry-After header may be present that specifies how many seconds you need to wait before attempting the request again.'
'428':
description: 'Precondition Required: File(s) cannot be scanned for malware and need to be force downloaded.'
'429':
description: 'Too Many Requests: Too many requests have been sent in a given amount of time and the request has been rate limited. A Retry-After header should be present that specifies how many seconds you need to wait before a successful request can be made.'
'500':
description: 'Internal Server Error: Something went wrong on the server. If the issue persists, feel free to contact the [Webex Developer Support team](/explore/support).'
'502':
description: 'Bad Gateway: The server received an invalid response from an upstream server while processing the request. Try again later.'
'503':
description: 'Service Unavailable: Server is overloaded with requests. Try again later.'
'504':
description: 'Gateway Timeout: An upstream server failed to respond on time. If your query uses max parameter, please try to reduce it.'
summary: Get List Available Preferred Answer Endpoints
operationId: getListAvailablePreferredAnswerEndpoints
description: "Get the person's preferred answer endpoint and the list of endpoints available for selection. The list of endpoints is empty if the person has no endpoints assigned which support the preferred answer endpoint functionality.\n\n A Webex Calling user may be associated with multiple endpoints such as Webex App (desktop or mobile), Cisco desk IP phone, Webex Calling-supported analog devices or third-party endpoints. Preferred answering endpoints allow users to specify which of these devices should be prioritized for answering calls, particularly when a person's extension (or a virtual line assigned to them) rings on multiple devices. This helps ensure that calls are answered on the most convenient or appropriate device for the person.\n\nThis API requires a user auth token with a scope of `spark:telephony_config_read`."
tags:
- Call Settings For Me
parameters: []
security:
- bearer-key: []
/telephony/config/people/me/settings/secondaryLines/{lineOwnerId}/availablePreferredAnswerEndpoints:
get:
summary: Get My Secondary Line Owner's Available Preferred Answer Endpoint List
operationId: getSecondaryLinesAvailablePreferredAnswerEndpointList
description: "Retrieve the list of available preferred answer endpoints for the secondary line owner of the authenticated person. \n\n A Webex Calling user may be associated with multiple endpoints such as Webex App (desktop or mobile), Cisco desk IP phone, Webex Calling-supported analog devices or third-party endpoints. Preferred answering endpoints allow users to specify which of these devices should be prioritized for answering calls, particularly when a person's extension (or a virtual line assigned to them) rings on multiple devices. This helps ensure that calls are answered on the most convenient or appropriate device for the person.\n\n This API requires a user auth token with a scope of `spark:telephony_config_read`."
tags:
- Call Settings For Me
parameters:
- name: lineOwnerId
in: path
required: true
description: Unique identifier for the secondary line owner (applicable only for Virtual Lines).
example: Y2lzY29zcGFyazovL3VzL1ZJUlRVQUxfTElORS85NWM4MGY0My1mNjBlLTQzYTAtYTkwMy1iNWQ3ZDg0MThiNDU
schema:
type: string
responses:
'200':
description: OK
content:
application/json:
schema:
$ref: '#/components/schemas/preferredAnswerEndpointInformation'
example:
endpoints:
- id: Y2lzY29z...
type: DEVICE
name: Cisco 8865 (Phone in reception area)
isPreferredAnswerEndpoint: false
- id: Y2lzY29b...
type: APPLICATION
name: Webex Desktop Application
isPreferredAnswerEndpoint: false
'400':
description: 'Bad Request: The request was invalid or cannot be otherwise served. An accompanying error message will explain further.'
'401':
description: 'Unauthorized: Authentication credentials were missing or incorrect.'
'403':
description: 'Forbidden: The request is understood, but it has been refused or access is not allowed.'
'404':
description: 'Not Found: The URI requested is invalid or the resource requested, such as a user, does not exist. Also returned when the requested format is not supported by the requested method.'
'405':
description: 'Method Not Allowed: The request was made to a resource using an HTTP request method that is not supported.'
'409':
description: 'Conflict: The request could not be processed because it conflicts with some established rule of the system. For example, a person may not be added to a room more than once.'
'410':
description: 'Gone: The requested resource is no longer available.'
'415':
description: 'Unsupported Media Type: The request was made to a resource without specifying a media type or used a media type that is not supported.'
'423':
description: 'Locked: The requested resource is temporarily unavailable. A Retry-After header may be present that specifies how many seconds you need to wait before attempting the request again.'
'428':
description: 'Precondition Required: File(s) cannot be scanned for malware and need to be force downloaded.'
'429':
description: 'Too Many Requests: Too many requests have been sent in a given amount of time and the request has been rate limited. A Retry-After header should be present that specifies how many seconds you need to wait before a successful request can be made.'
'500':
description: 'Internal Server Error: Something went wrong on the server. If the issue persists, feel free to contact the [Webex Developer Support team](/explore/support).'
'502':
description: 'Bad Gateway: The server received an invalid response from an upstream server while processing the request. Try again later.'
'503':
description: 'Service Unavailable: Server is overloaded with requests. Try again later.'
'504':
description: 'Gateway Timeout: An upstream server failed to respond on time. If your query uses max parameter, please try to reduce it.'
/telephony/config/people/me/settings/preferredAnswerEndpoint:
get:
summary: Get Preferred Answer Endpoint
operationId: getMyPreferredAnswerEndpoint
description: "Retrieve the selected preferred answering endpoint for the user. If a preferred endpoint is not set for the person, API returns empty \n\n A Webex Calling user may be associated with multiple endpoints such as Webex App (desktop or mobile), Cisco desk IP phone, Webex Calling-supported analog devices or third-party endpoints. Preferred answering endpoints allow users to specify which of these devices should be prioritized for answering calls, particularly when a person's extension (or a virtual line assigned to them) rings on multiple devices. This helps ensure that calls are answered on the most convenient or appropriate device for the person.\n\n This API requires a user auth token with a scope of `spark:telephony_config_read`."
tags:
- Call Settings For Me
responses:
'200':
description: OK
content:
application/json:
schema:
$ref: '#/components/schemas/preferredAnswerEndpoint'
example:
id: Y2lzY29z...
type: DEVICE
name: Cisco 8865 (Phone in reception area)
'400':
description: 'Bad Request: The request was invalid or cannot be otherwise served. An accompanying error message will explain further.'
'401':
description: 'Unauthorized: Authentication credentials were missing or incorrect.'
'403':
description: 'Forbidden: The request is understood, but it has been refused or access is not allowed.'
'404':
description: 'Not Found: The URI requested is invalid or the resource requested, such as a user, does not exist. Also returned when the requested format is not supported by the requested method.'
'405':
description: 'Method Not Allowed: The request was made to a resource using an HTTP request method that is not supported.'
'409':
description: 'Conflict: The request could not be processed because it conflicts with some established rule of the system. For example, a person may not be added to a room more than once.'
'410':
description: 'Gone: The requested resource is no longer available.'
'415':
description: 'Unsupported Media Type: The request was made to a resource without specifying a media type or used a media type that is not supported.'
'423':
description: 'Locked: The requested resource is temporarily unavailable. A Retry-After header may be present that specifies how many seconds you need to wait before attempting the request again.'
'428':
description: 'Precondition Required: File(s) cannot be scanned for malware and need to be force downloaded.'
'429':
description: 'Too Many Requests: Too many requests have been sent in a given amount of time and the request has been rate limited. A Retry-After header should be present that specifies how many seconds you need to wait before a successful request can be made.'
'500':
description: 'Internal Server Error: Something went wrong on the server. If the issue persists, feel free to contact the [Webex Developer Support team](/explore/support).'
'502':
description: 'Bad Gateway: The server received an invalid response from an upstream server while processing the request. Try again later.'
'503':
description: 'Service Unavailable: Server is overloaded with requests. Try again later.'
'504':
description: 'Gateway Timeout: An upstream server failed to respond on time. If your query uses max parameter, please try to reduce it.'
parameters: []
security:
- bearer-key: []
put:
summary: Modify Preferred Answer Endpoint
operationId: modifyMyPreferredAnswerEndpoint
description: "Sets or clears the person’s preferred answer endpoint. To clear the preferred answer endpoint the `id` attribute must be set to null.\n\n A Webex Calling user may be associated with multiple endpoints such as Webex App (desktop or mobile), Cisco desk IP phone, Webex Calling-supported analog devices or third-party endpoints. Preferred answering endpoints allow users to specify which of these devices should be prioritized for answering calls, particularly when a person's extension (or a virtual line assigned to them) rings on multiple devices. This helps ensure that calls are answered on the most convenient or appropriate device for the person.\n\nThis API requires a user auth token with a scope of `spark:telephony_config_write`."
tags:
- Call Settings For Me
requestBody:
content:
application/json:
schema:
$ref: '#/components/schemas/EndpointIdType'
example:
id: Y2lzY29z...
responses:
'204':
description: 'No Content: The preferred answering endpoint was successfully updated.'
'400':
description: 'Bad Request: The request was invalid or cannot be otherwise served. An accompanying error message will explain further.'
'401':
description: 'Unauthorized: Authentication credentials were missing or incorrect.'
'403':
description: 'Forbidden: The request is understood, but it has been refused or access is not allowed.'
'404':
description: 'Not Found: The URI requested is invalid or the resource requested, such as a user, does not exist. Also returned when the requested format is not supported by the requested method.'
parameters: []
security:
- bearer-key: []
/telephony/config/people/me/settings/secondaryLines/{lineOwnerId}/preferredAnswerEndpoint:
get:
summary: Get My Secondary Line Owner's Preferred Answer Endpoint
operationId: getMySecondaryLinesPreferredAnswerEndpoint
description: "Retrieve the selected preferred answering endpoint for the secondary line owner of the authenticated person. If a preferred endpoint is not set for the person, API returns empty \n\n A Webex Calling user may be associated with multiple endpoints such as Webex App (desktop or mobile), Cisco desk IP phone, Webex Calling-supported analog devices or third-party endpoints. Preferred answering endpoints allow users to specify which of these devices should be prioritized for answering calls, particularly when a person's extension (or a virtual line assigned to them) rings on multiple devices. This helps ensure that calls are answered on the most convenient or appropriate device for the person.\n\n This API requires a user auth token with a scope of `spark:telephony_config_read`."
tags:
- Call Settings For Me
responses:
'200':
description: OK
content:
application/json:
schema:
$ref: '#/components/schemas/preferredAnswerEndpoint'
example:
id: Y2lzY29z...
type: DEVICE
name: Cisco 8865 (Phone in reception area)
'400':
description: 'Bad Request: The request was invalid or cannot be otherwise served. An accompanying error message will explain further.'
'401':
description: 'Unauthorized: Authentication credentials were missing or incorrect.'
'403':
description: 'Forbidden: The request is understood, but it has been refused or access is not allowed.'
'404':
description: 'Not Found: The URI requested is invalid or the resource requested, such as a user, does not exist. Also returned when the requested format is not supported by the requested method.'
'405':
description: 'Method Not Allowed: The request was made to a resource using an HTTP request method that is not supported.'
'409':
description: 'Conflict: The request could not be processed because it conflicts with some established rule of the system. For example, a person may not be added to a room more than once.'
'410':
description: 'Gone: The requested resource is no longer available.'
'415':
description: 'Unsupported Media Type: The request was made to a resource without specifying a media type or used a media type that is not supported.'
'423':
description: 'Locked: The requested resource is temporarily unavailable. A Retry-After header may be present that specifies how many seconds you need to wait before attempting the request again.'
'428':
description: 'Precondition Required: File(s) cannot be scanned for malware and need to be force downloaded.'
'429':
description: 'Too Many Requests: Too many requests have been sent in a given amount of time and the request has been rate limited. A Retry-After header should be present that specifies how many seconds you need to wait before a successful request can be made.'
'500':
description: 'Internal Server Error: Something went wrong on the server. If the issue persists, feel free to contact the [Webex Developer Support team](/explore/support).'
'502':
description: 'Bad Gateway: The server received an invalid response from an upstream server while processing the request. Try again later.'
'503':
description: 'Service Unavailable: Server is overloaded with requests. Try again later.'
'504':
description: 'Gateway Timeout: An upstream server failed to respond on time. If your query uses max parameter, please try to reduce it.'
parameters:
- name: lineOwnerId
in: path
required: true
description: Unique identifier for the secondary line owner (applicable only for Virtual Lines).
example: Y2lzY29zcGFyazovL3VzL1ZJUlRVQUxfTElORS85NWM4MGY0My1mNjBlLTQzYTAtYTkwMy1iNWQ3ZDg0MThiNDU
schema:
type: string
security:
- bearer-key: []
put:
summary: Modify My Secondary Line Owner's Preferred Answer Endpoint
operationId: modifyMySecondaryLinesPreferredAnswerEndpoint
description: "Sets or clears the preferred answer endpoint for the secondary line owner of the authenticated person. To clear the preferred answer endpoint the `id` attribute must be set to null.\n\n A Webex Calling user may be associated with multiple endpoints such as Webex App (desktop or mobile), Cisco desk IP phone, Webex Calling-supported analog devices or third-party endpoints. Preferred answering endpoints allow users to specify which of these devices should be prioritized for answering calls, particularly when a person's extension (or a virtual line assigned to them) rings on multiple devices. This helps ensure that calls are answered on the most convenient or appropriate device for the person.\n\nThis API requires a user auth token with a scope of `spark:telephony_config_write`."
tags:
- Call Settings For Me
requestBody:
content:
application/json:
schema:
$ref: '#/components/schemas/EndpointIdType'
example:
id: Y2lzY29z...
responses:
'204':
description: 'No Content: The preferred answering endpoint was successfully updated.'
'400':
description: 'Bad Request: The request was invalid or cannot be otherwise served. An accompanying error message will explain further.'
'401':
description: 'Unauthorized: Authentication credentials were missing or incorrect.'
'403':
description: 'Forbidden: The request is understood, but it has been refused or access is not allowed.'
'404':
description: 'Not Found: The URI requested is invalid or the resource requested, such as a user, does not exist. Also returned when the requested format is not supported by the requested method.'
parameters:
- name: lineOwnerId
in: path
required: true
description: Unique identifier for the secondary line owner (applicable only for Virtual Lines).
example: Y2lzY29zcGFyazovL3VzL1ZJUlRVQUxfTElORS85NWM4MGY0My1mNjBlLTQzYTAtYTkwMy1iNWQ3ZDg0MThiNDU
schema:
type: string
security:
- bearer-key: []
/telephony/config/people/me/settings/webexGoOverride:
get:
responses:
'200':
description: OK
headers: {}
content:
application/json:
schema:
$ref: '#/components/schemas/UserDNDWebexGoOverrideGet'
example:
enabled: true
'401':
description: 'Unauthorized: Authentication credentials were missing or incorrect.'
'403':
description: 'Forbidden: The request is understood, but it has been refused or access is not allowed.'
'429':
description: 'Too Many Requests: Too many requests have been sent in a given amount of time and the request has been rate limited. A Retry-After header should be present that specifies how many seconds you need to wait before a successful request can be made.'
'500':
description: 'Internal Server Error: Something went wrong on the server. If the issue persists, feel free to contact the [Webex Developer Support team](/explore/support).'
summary: Get My WebexGoOverride Settings
operationId: getMyWebexGoOverrideSettings
description: 'Retrieve "Mobile User Aware" override setting for Do Not Disturb feature.
When enabled, a mobile device will still ring even if Do Not Disturb, Quiet Hours, or Presenting Status are enabled.
When disabled, a mobile device will return busy for all incoming calls if Do Not Disturb, Quiet Hours, or Presenting Status are enabled.
It requires a user auth token with `spark:telephony_config_read` scope.'
tags:
- Call Settings For Me
parameters: []
put:
responses:
'204':
description: No Content
headers: {}
content: {}
'401':
description: 'Unauthorized: Authentication credentials were missing or incorrect.'
'403':
description: 'Forbidden: The request is understood, but it has been refused or access is not allowed.'
'429':
description: 'Too Many Requests: Too many requests have been sent in a given amount of time and the request has been rate limited. A Retry-After header should be present that specifies how many seconds you need to wait before a successful request can be made.'
'500':
description: 'Internal Server Error: Something went wrong on the server. If the issue persists, feel free to contact the [Webex Developer Support team](/explore/support).'
summary: Modify My WebexGoOverride Settings
operationId: modifyMyWebexGoOverrideSettings
description: 'Update "Mobile User Aware" override setting for Do Not Disturb feature.
When enabled, a mobile device will still ring even if Do Not Disturb, Quiet Hours, or Presenting Status are enabled.
When disabled, a mobile device will return busy for all incoming calls if Do Not Disturb, Quiet Hours, or Presenting Status are enabled.
It requires a user auth token with the `spark:telephony_config_write` scope.'
tags:
- Call Settings For Me
parameters: []
requestBody:
content:
application/json:
example:
enabled: true
schema:
$ref: '#/components/schemas/UserDNDWebexGoOverridePatch'
/telephony/config/people/me/settings/callerId:
get:
responses:
'200':
description: OK
headers: {}
content:
application/json:
schema:
$ref: '#/components/schemas/CallerIdSettingsGet'
example:
callingLineIdDeliveryBlockingEnabled: false
connectedLineIdentificationRestrictionEnabled: false
'400':
description: 'Bad Request: The request was invalid or cannot be otherwise served. An accompanying error message will explain further.'
'401':
description: 'Unauthorized: Authentication credentials were missing or incorrect.'
'403':
description: 'Forbidden: The request is understood, but it has been refused or access is not allowed.'
'404':
description: 'Not Found: The URI requested is invalid or the resource requested, such as a user, does not exist. Also returned when the requested format is not supported by the requested method.'
'405':
description: 'Method Not Allowed: The request was made to a resource using an HTTP request method that is not supported.'
'409':
description: 'Conflict: The request could not be processed because it conflicts with some established rule of the system. For example, a person may not be added to a room more than once.'
'410':
description: 'Gone: The requested resource is no longer available.'
'415':
description: 'Unsupported Media Type: The request was made to a resource without specifying a media type or used a media type that is not supported.'
'423':
description: 'Locked: The requested resource is temporarily unavailable. A Retry-After header may be present that specifies how many seconds you need to wait before attempting the request again.'
'428':
description: 'Precondition Required: File(s) cannot be scanned for malware and need to be force downloaded.'
'429':
description: 'Too Many Requests: Too many requests have been sent in a given amount of time and the request has been rate limited. A Retry-After header should be present that specifies how many seconds you need to wait before a successful request can be made.'
'500':
description: 'Internal Server Error: Something went wrong on the server. If the issue persists, feel free to contact the [Webex Developer Support team](/explore/support).'
'502':
description: 'Bad Gateway: The server received an invalid response from an upstream server while processing the request. Try again later.'
'503':
description: 'Service Unavailable: Server is overloaded with requests. Try again later.'
'504':
description: 'Gateway Timeout: An upstream server failed to respond on time. If your query uses max parameter, please try to reduce it.'
summary: Get My Caller ID Settings
operationId: getMyCallerIDSettings
description: 'Get Caller ID Settings for the authenticated user.
Calling Line ID Delivery Blocking in Webex prevents your name and phone number from being shown to people you call.
Connected Line Identification Restriction allows you to block your name and phone number from being shown when receiving a call.
This API requires a user auth token with a scope of `spark:telephony_config_read`.'
tags:
- Call Settings For Me
parameters: []
put:
responses:
'204':
description: No Content
headers: {}
content: {}
'400':
description: 'Bad Request: The request was invalid or cannot be otherwise served. An accompanying error message will explain further.'
'401':
description: 'Unauthorized: Authentication credentials were missing or incorrect.'
'403':
description: 'Forbidden: The request is understood, but it has been refused or access is not allowed.'
'404':
description: 'Not Found: The URI requested is invalid or the resource requested, such as a user, does not exist. Also returned when the requested format is not supported by the requested method.'
'405':
description: 'Method Not Allowed: The request was made to a resource using an HTTP request method that is not supported.'
'409':
description: 'Conflict: The request could not be processed because it conflicts with some established rule of the system. For example, a person may not be added to a room more than once.'
'410':
description: 'Gone: The requested resource is no longer available.'
'415':
description: 'Unsupported Media Type: The request was made to a resource without specifying a media type or used a media type that is not supported.'
'423':
description: 'Locked: The requested resource is temporarily unavailable. A Retry-After header may be present that specifies how many seconds you need to wait before attempting the request again.'
'428':
description: 'Precondition Required: File(s) cannot be scanned for malware and need to be force downloaded.'
'429':
description: 'Too Many Requests: Too many requests have been sent in a given amount of time and the request has been rate limited. A Retry-After header should be present that specifies how many seconds you need to wait before a successful request can be made.'
'500':
description: 'Internal Server Error: Something went wrong on the server. If the issue persists, feel free to contact the [Webex Developer Support team](/explore/support).'
'502':
description: 'Bad Gateway: The server received an invalid response from an upstream server while processing the request. Try again later.'
'503':
description: 'Service Unavailable: Server is overloaded with requests. Try again later.'
'504':
description: 'Gateway Timeout: An upstream server failed to respond on time. If your query uses max parameter, please try to reduce it.'
summary: Modify My Caller ID Settings
operationId: modifyMyCallerIDSettings
description: 'Update Caller ID Settings for the authenticated user.
Calling Line ID Delivery Blocking in Webex prevents your name and phone number from being shown to people you call.
Connected Line Identification Restriction allows you to block your name and phone number from being shown when receiving a call.
This API requires a user auth token with a scope of `spark:telephony_config_write`.'
tags:
- Call Settings For Me
parameters: []
requestBody:
content:
application/json:
example:
callingLineIdDeliveryBlockingEnabled: false
connectedLineIdentificationRestrictionEnabled: false
schema:
$ref: '#/components/schemas/CallerIdSett
# --- truncated at 32 KB (347 KB total) ---
# Full source: https://raw.githubusercontent.com/api-evangelist/webex/refs/heads/main/openapi/webex-call-settings-for-me-api-openapi.yml