Webex Bulk Manage SCIM 2 Users and Groups API

openapi: 3.2.0
info:
  title: Webex Bulk Manage SCIM 2 Users and Groups API
  version: 1.0.0
  description: 'Operations tagged Bulk Manage SCIM 2 Users and Groups across 2 of this provider''s published API definitions: webex-admin-openapi.json, webex-bulk-manage-scim-2-users-and-groups-api-openapi.yml. Each path carries the servers of the definition it was published in.'
  x-provenance:
    method: harvested
    authored_by: Cisco Webex
    harvested_by: API Evangelist
    harvested_on: '2026-08-19'
    first_party: true
    note: Published by Cisco. Retrieved unmodified except for this x-provenance block.
    provider_published: true
    derived_view: Per-tag view of webex-admin-openapi.json, the provider's source document. Operations and schemas are the provider's, unmodified; only the partition is ours.
    derived_from: webex-admin-openapi.json
    operation_coverage: 1/1
  x-evidence:
  - type: source
    url: https://github.com/webex/webex-openapi-specs/blob/main/public-spec/webex-admin.json
  - type: raw
    url: https://raw.githubusercontent.com/webex/webex-openapi-specs/main/public-spec/webex-admin.json
tags:
- name: Bulk Manage SCIM 2 Users and Groups
paths:
  /identity/scim/{orgId}/v2/Bulk:
    post:
      responses:
        '200':
          description: OK
          headers: {}
          content:
            application/json:
              schema:
                $ref: '#/components/schemas/BulkUser'
              example:
                schemas:
                - urn:ietf:params:scim:api:messages:2.0:BulkResponse
                Operations:
                - location: https://example.com/v2/Users/92b725cd-9465-4e7d-8c16-01f8e146b87a
                  method: POST
                  bulkId: qwerty
                  version: W/"oY4m4wn58tkVjJxK"
                  status: '201'
                - location: https://example.com/v2/Users/5d8d29d3-342c-4b5f-8683-a3cb6763ffcc
                  method: PATCH
                  version: W/"huJj29dMNgu3WXPD"
                  status: '200'
                - location: https://example.com/v2/Users/e9025315-6bea-44e1-899c-1e07454e468b
                  method: DELETE
                  status: '204'
        '400':
          description: 'Bad Request: The request was invalid or cannot be otherwise served. An accompanying error message will explain further.'
        '401':
          description: 'Unauthorized: Authentication credentials were missing or incorrect.'
        '403':
          description: 'Forbidden: The request is understood, but it has been refused or access is not allowed.'
        '404':
          description: 'Not Found: The URI requested is invalid or the resource requested, such as a user, does not exist. Also returned when the requested format is not supported by the requested method.'
        '405':
          description: 'Method Not Allowed: The request was made to a resource using an HTTP request method that is not supported.'
        '409':
          description: 'Conflict: The request could not be processed because it conflicts with some established rule of the system. For example, a person may not be added to a room more than once.'
        '410':
          description: 'Gone: The requested resource is no longer available.'
        '415':
          description: 'Unsupported Media Type: The request was made to a resource without specifying a media type or used a media type that is not supported.'
        '423':
          description: 'Locked: The requested resource is temporarily unavailable. A Retry-After header may be present that specifies how many seconds you need to wait before attempting the request again.'
        '428':
          description: 'Precondition Required: File(s) cannot be scanned for malware and need to be force downloaded.'
        '429':
          description: 'Too Many Requests: Too many requests have been sent in a given amount of time and the request has been rate limited. A Retry-After header should be present that specifies how many seconds you need to wait before a successful request can be made.'
        '500':
          description: 'Internal Server Error: Something went wrong on the server. If the issue persists, feel free to contact the [Webex Developer Support team](/explore/support).'
        '502':
          description: 'Bad Gateway: The server received an invalid response from an upstream server while processing the request. Try again later.'
        '503':
          description: 'Service Unavailable: Server is overloaded with requests. Try again later.'
        '504':
          description: 'Gateway Timeout: An upstream server failed to respond on time. If your query uses max parameter, please try to reduce it.'
      summary: User bulk API
      operationId: User bulk API
      description: "<br/>\n\n**Authorization**\n\nOAuth token rendered by Identity Broker.\n\n<br/>\n\nOne of the following OAuth scopes is required:\n\n- `identity:people_rw`\n\n<br/>\n\n**Usage**:\n\n1. The input JSON must conform to the following schema: 'urn:ietf:params:scim:api:messages:2.0:BulkRequest'.\n\n1. The request must be accompanied with a body in JSON format according to the standard SCIM schema definition.\n   The maximum number of operations in a request is 100; an error is thrown if the limit is exceeded.\n\n1. `failOnErrors` parameter\n\n   An integer specifies the number of errors that the service provider will accept before the operation is terminated and an error response is returned.\n   It is OPTIONAL in a request.\n   Maximum number of operations allowed to fail before the server stops processing the request. The value must be between 1 and 100.\n\n1. `operations` parameter\n\n   Contains a list of bulk operations for POST/PATCH/DELETE operations. (REQUIRED)\n    + `operations.method`\n\n      The HTTP method of the current operation. Possible values are POST, PATCH or DELETE.\n    + `operations.path`\n\n      The Resource's relative path. If the method is POST the value must specify a Resource type endpoint;\n      e.g., /Users or /Groups whereas all other method values must specify the path to a specific Resource;\n      e.g., /Users/2819c223-7f76-453a-919d-413861904646.\n    + `operations.data`\n\n      The Resource data as it would appear for a single POST or PATCH Resource operation.\n      It is REQUIRED in a request when method is POST and PATCH.\n      Refer to corresponding wiki for SCIM 2.0 POST, PATCH and DELETE API.\n    + `operations.bulkId`\n\n      The transient identifier of a newly created resource, unique within a bulk request and created by the client.\n      The bulkId serves as a surrogate resource id enabling clients to uniquely identify newly created resources in the response and cross-reference new resources in and across operations within a bulk request.\n      It is REQUIRED when \"method\" is \"POST\"."
      tags:
      - Bulk Manage SCIM 2 Users and Groups
      parameters:
      - name: orgId
        in: path
        description: Webex Identity assigned organization identifier for user's organization.
        required: true
        example: 0ae87ade-8c8a-4952-af08-318798958d0c
        schema:
          type: string
      requestBody:
        content:
          application/json:
            example:
              schemas:
              - urn:ietf:params:scim:api:messages:2.0:BulkRequest
              failOnErrors: 99
              operations:
              - method: PATCH
                path: /Users/2819c223-7f76-453a-919d-413861904646
                data: JSON text
                bulkId: ytrewq
            schema:
              $ref: '#/components/schemas/BulkUser'
components:
  schemas:
    BulkUser:
      type: object
      required:
      - schemas
      - failOnErrors
      - operations
      properties:
        schemas:
          type: array
          items:
            type: string
            example: urn:ietf:params:scim:api:messages:2.0:BulkRequest
          description: Input JSON schemas.
        failOnErrors:
          type: number
          example: 99
          description: An integer specifying the maximum number of errors that the service provider will accept before the operation is terminated and an error response is returned.
        operations:
          type: array
          items:
            type: object
            required:
            - method
            - path
            properties:
              method:
                type: string
                enum:
                - POST
                - PATCH
                - DELETE
                description: The HTTP method of the current operation.
              path:
                type: string
                example: /Users/2819c223-7f76-453a-919d-413861904646
                description: The resource's relative path. If the method is POST, the value must specify a resource type endpoint, for example `/Users` or `/Groups`. All other method values must specify the path to a specific resource.
              data:
                type: string
                example: JSON text
                description: The Resource JSON data as it appears for a single POST or PATCH resource operation.
              bulkId:
                type: string
                example: ytrewq
                description: The transient identifier of a newly created resource, unique within a bulk request and created by the client.
          description: Contains a list of bulk operations for POST/PATCH/DELETE operations.
  securitySchemes:
    oauth2:
      flows:
        authorizationCode:
          authorizationUrl: /
          scopes: {}
          tokenUrl: /
      type: oauth2
    bearer-key:
      type: http
      description: e.g. Bearer YOUR_AUTHORIZATION_TOKEN
      scheme: bearer
      bearerFormat: JWT
    bearerAuth:
      type: oauth2
      description: OAuth 2.0 Bearer token authentication
      flows:
        authorizationCode:
          authorizationUrl: https://webexapis.com/v1/authorize
          tokenUrl: https://webexapis.com/v1/access_token
          scopes:
            spark:applications_token: Create access tokens for Service Apps
x-refined-from:
- webex-admin-openapi.json
- webex-bulk-manage-scim-2-users-and-groups-api-openapi.yml