ScienceLogic Settings/Network API
Allows you to set network settings such as the IP address and static routes. ### Network Address Translation (NAT) Skylar Compliance may use back-connections (typically TFTP or FTP) to backup certain devices. If Skylar Compliance is accessing a device using back connections through a NAT router or firewall, back-connections will fail, because the device will attempt to connect to the original, untranslated IP address. To avoid this problem, proceed as follows: * On your firewall, create a 1:1 NAT mapping (often referred to as Static NAT or Mapped IP) to translate the IP address of Skylar Compliance to a public/routable IP address * Set the public IP address for Skylar Compliance in the `NatAddress` field. The system-wide NAT IP address defined here can be overridden in the Domain settings, or in each individual device's settings * The Back-connection NAT option also needs to be selected in any device which is accessed by Skylar Compliance through NAT Skylar Compliance supports multiple NAT addresses; the NAT IP address defined in this page can be overridden by the Domain or Device NAT IP setting. ### Please note Changing the IP address to a different one will result in aborted connections.