Microsoft Azure
Microsoft Azure Faults API

The Faults API from Microsoft Azure — 10 operation(s) for faults.
Documentation GitHub OpenAPI
OpenAPI Specification

swagger: '2.0'
info:
  version: 2020-08-01-preview
  title: Microsoft Azure AccessControlClient AccessConnector Faults API
schemes:
- https
tags:
- name: Faults
paths:
  /Faults/Services/{serviceId}/$/GetPartitions/{partitionId}/$/StartDataLoss:
    post:
      operationId: microsoftAzureStartdataloss
      summary: Microsoft Azure This Api Will Induce Data Loss For The Specified Partition It Will Trigger A Call To The Ondatalossasync Api Of The Partition
      description: 'This API will induce data loss for the specified partition. It will trigger a call to the OnDataLoss API of the partition.<br>Actual data loss will depend on the specified DataLossMode.<br><br>- PartialDataLoss - Only a quorum of replicas are removed and OnDataLoss is triggered for the partition but actual data loss depends on the presence of in-flight replication.<br>- FullDataLoss - All replicas are removed hence all data is lost and OnDataLoss is triggered.<br><br>This API should only be called with a stateful service as the target.<br><br>Calling this API with a system service as the target is not advised.<br><br>Note:  Once this API has been called, it cannot be reversed. Calling CancelOperation will only stop execution and clean up internal system state.<br>It will not restore data if the command has progressed far enough to cause data loss.<br><br>Call the GetDataLossProgress API with the same OperationId to return information on the operation started with this API.'
      tags:
      - Faults
      parameters:
      - $ref: '#/parameters/ApiVersion_6-0_RequiredQueryParam'
      - $ref: '#/parameters/ServiceIdRequiredPathParam'
      - $ref: '#/parameters/PartitionIdRequiredPathParam'
      - $ref: '#/parameters/FaultOperationIdRequiredQueryParam'
      - $ref: '#/parameters/DataLossModeRequiredQueryParam'
      - $ref: '#/parameters/TimeoutOptionalQueryParam'
      responses:
        '202':
          description: A 202 status code indicates the operation was accepted.  Call the GetDataLossProgress API to get the progress.
        default:
          description: The detailed error response.
          schema:
            $ref: '#/definitions/FabricError'
  /Faults/Services/{serviceId}/$/GetPartitions/{partitionId}/$/GetDataLossProgress:
    get:
      summary: Microsoft Azure Gets The Progress Of A Partition Data Loss Operation Started Using The Startdataloss Api
      description: Gets the progress of a data loss operation started with StartDataLoss, using the OperationId.
      operationId: microsoftAzureGetdatalossprogress
      x-ms-examples:
        Gets information about a partition data loss operation.  In this case the operation has a State of Completed:
          $ref: ./examples/GetDataLossProgress.json
        Get information about a partition data loss operation.  In this case the operation is a State of Running:
          $ref: ./examples/GetDataLossProgress-Running.json
      parameters:
      - $ref: '#/parameters/ApiVersion_6-0_RequiredQueryParam'
      - $ref: '#/parameters/ServiceIdRequiredPathParam'
      - $ref: '#/parameters/PartitionIdRequiredPathParam'
      - $ref: '#/parameters/FaultOperationIdRequiredQueryParam'
      - $ref: '#/parameters/TimeoutOptionalQueryParam'
      tags:
      - Faults
      responses:
        '200':
          description: Information about the progress of the partition data loss operation.
          schema:
            $ref: '#/definitions/PartitionDataLossProgress'
        default:
          description: The detailed error response.
          schema:
            $ref: '#/definitions/FabricError'
  /Faults/Services/{serviceId}/$/GetPartitions/{partitionId}/$/StartQuorumLoss:
    post:
      operationId: microsoftAzureStartquorumloss
      summary: Microsoft Azure Induces Quorum Loss For A Given Stateful Service Partition
      description: This API is useful for a temporary quorum loss situation on your service.<br><br>Call the GetQuorumLossProgress API with the same OperationId to return information on the operation started with this API.<br><br>This can only be called on stateful persisted (HasPersistedState==true) services.  Do not use this API on stateless services or stateful in-memory only services.
      tags:
      - Faults
      parameters:
      - $ref: '#/parameters/ApiVersion_6-0_RequiredQueryParam'
      - $ref: '#/parameters/ServiceIdRequiredPathParam'
      - $ref: '#/parameters/PartitionIdRequiredPathParam'
      - $ref: '#/parameters/FaultOperationIdRequiredQueryParam'
      - $ref: '#/parameters/QuorumLossModeRequiredQueryParam'
      - $ref: '#/parameters/QuorumLossDurationRequiredQueryParam'
      - $ref: '#/parameters/TimeoutOptionalQueryParam'
      responses:
        '202':
          description: A 202 status code indicates the operation was accepted.  Call the GetQuorumLossProgress API to get the progress.
        default:
          description: The detailed error response.
          schema:
            $ref: '#/definitions/FabricError'
  /Faults/Services/{serviceId}/$/GetPartitions/{partitionId}/$/GetQuorumLossProgress:
    get:
      summary: Microsoft Azure Gets The Progress Of A Quorum Loss Operation On A Partition Started Using The Startquorumloss Api
      description: Gets the progress of a quorum loss operation started with StartQuorumLoss, using the provided OperationId.
      operationId: microsoftAzureGetquorumlossprogress
      x-ms-examples:
        Gets information about a completed quorum loss operation:
          $ref: ./examples/GetQuorumLossProgress.json
        Gets information about a running quorum operation operation:
          $ref: ./examples/GetQuorumLossProgress-Running.json
      parameters:
      - $ref: '#/parameters/ApiVersion_6-0_RequiredQueryParam'
      - $ref: '#/parameters/ServiceIdRequiredPathParam'
      - $ref: '#/parameters/PartitionIdRequiredPathParam'
      - $ref: '#/parameters/FaultOperationIdRequiredQueryParam'
      - $ref: '#/parameters/TimeoutOptionalQueryParam'
      tags:
      - Faults
      responses:
        '200':
          description: Information about the progress of a partition quorum loss operation.
          schema:
            $ref: '#/definitions/PartitionQuorumLossProgress'
        default:
          description: The detailed error response.
          schema:
            $ref: '#/definitions/FabricError'
  /Faults/Services/{serviceId}/$/GetPartitions/{partitionId}/$/StartRestart:
    post:
      operationId: microsoftAzureStartpartitionrestart
      summary: Microsoft Azure This Api Will Restart Some Or All Replicas Or Instances Of The Specified Partition
      description: This API is useful for testing failover.<br><br>If used to target a stateless service partition, RestartPartitionMode must be AllReplicasOrInstances.<br><br>Call the GetPartitionRestartProgress API using the same OperationId to get the progress.
      tags:
      - Faults
      parameters:
      - $ref: '#/parameters/ApiVersion_6-0_RequiredQueryParam'
      - $ref: '#/parameters/ServiceIdRequiredPathParam'
      - $ref: '#/parameters/PartitionIdRequiredPathParam'
      - $ref: '#/parameters/FaultOperationIdRequiredQueryParam'
      - $ref: '#/parameters/RestartPartitionModeRequiredQueryParam'
      - $ref: '#/parameters/TimeoutOptionalQueryParam'
      responses:
        '202':
          description: A 202 status code indicates the operation was accepted.  Call the GetPartitionRestartProgress API to get the progress.
        default:
          description: The detailed error response.
          schema:
            $ref: '#/definitions/FabricError'
  /Faults/Services/{serviceId}/$/GetPartitions/{partitionId}/$/GetRestartProgress:
    get:
      summary: Microsoft Azure Gets The Progress Of A Partitionrestart Operation Started Using Startpartitionrestart
      description: Gets the progress of a PartitionRestart started with StartPartitionRestart using the provided OperationId.
      operationId: microsoftAzureGetpartitionrestartprogress
      x-ms-examples:
        Get information a completed PartitionRestart operation:
          $ref: ./examples/GetPartitionRestartProgress.json
      parameters:
      - $ref: '#/parameters/ApiVersion_6-0_RequiredQueryParam'
      - $ref: '#/parameters/ServiceIdRequiredPathParam'
      - $ref: '#/parameters/PartitionIdRequiredPathParam'
      - $ref: '#/parameters/FaultOperationIdRequiredQueryParam'
      - $ref: '#/parameters/TimeoutOptionalQueryParam'
      tags:
      - Faults
      responses:
        '200':
          description: Information about the progress of a partition restart operation.
          schema:
            $ref: '#/definitions/PartitionRestartProgress'
        default:
          description: The detailed error response.
          schema:
            $ref: '#/definitions/FabricError'
  /Faults/Nodes/{nodeName}/$/StartTransition/:
    post:
      operationId: microsoftAzureStartnodetransition
      summary: Microsoft Azure Starts Or Stops A Cluster Node
      description: Starts or stops a cluster node.  A cluster node is a process, not the OS instance itself.  To start a node, pass in "Start" for the NodeTransitionType parameter.<br>To stop a node, pass in "Stop" for the NodeTransitionType parameter.  This API starts the operation - when the API returns the node may not have finished transitioning yet.<br>Call GetNodeTransitionProgress with the same OperationId to get the progress of the operation.
      tags:
      - Faults
      parameters:
      - $ref: '#/parameters/ApiVersion_6-0_RequiredQueryParam'
      - $ref: '#/parameters/NodeNameRequiredPathParam'
      - $ref: '#/parameters/FaultOperationIdRequiredQueryParam'
      - $ref: '#/parameters/NodeTransitionTypeRequiredQueryParam'
      - $ref: '#/parameters/NodeInstanceIdRequiredQueryParam'
      - $ref: '#/parameters/StopDurationInSecondsRequiredQueryParam'
      - $ref: '#/parameters/TimeoutOptionalQueryParam'
      responses:
        '202':
          description: A 202 status code indicates the operation was accepted.  Call the GetNodeTransitionProgress API to get the progress.
        default:
          description: The detailed error response.
          schema:
            $ref: '#/definitions/FabricError'
  /Faults/Nodes/{nodeName}/$/GetTransitionProgress:
    get:
      summary: Microsoft Azure Gets The Progress Of An Operation Started Using Startnodetransition
      description: Gets the progress of an operation started with StartNodeTransition using the provided OperationId.
      operationId: microsoftAzureGetnodetransitionprogress
      x-ms-examples:
        Gets information about a completed NodeTransition operation:
          $ref: ./examples/GetNodeTransitionProgress.json
        Gets information about a running NodeTransition operation:
          $ref: ./examples/GetNodeTransitionProgress-Running.json
      parameters:
      - $ref: '#/parameters/ApiVersion_6-0_RequiredQueryParam'
      - $ref: '#/parameters/NodeNameRequiredPathParam'
      - $ref: '#/parameters/FaultOperationIdRequiredQueryParam'
      - $ref: '#/parameters/TimeoutOptionalQueryParam'
      tags:
      - Faults
      responses:
        '200':
          description: Information about the progress of a node transition operation.
          schema:
            $ref: '#/definitions/NodeTransitionProgress'
        default:
          description: The detailed error response.
          schema:
            $ref: '#/definitions/FabricError'
  /Faults/:
    get:
      operationId: microsoftAzureGetfaultoperationlist
      summary: Microsoft Azure Gets A List Of User Induced Fault Operations Filtered By Provided Input
      description: Gets the list of user-induced fault operations filtered by provided input.
      x-ms-examples:
        Gets information on fault operations:
          $ref: ./examples/GetFaultOperationList.json
      tags:
      - Faults
      parameters:
      - $ref: '#/parameters/ApiVersion_6-0_RequiredQueryParam'
      - $ref: '#/parameters/TypeFilterRequiredQueryParam'
      - $ref: '#/parameters/StateFilterRequiredQueryParam'
      - $ref: '#/parameters/TimeoutOptionalQueryParam'
      responses:
        '200':
          description: A successful operation will return 200 status code.
          schema:
            $ref: '#/definitions/OperationStatusList'
        default:
          description: The detailed error response.
          schema:
            $ref: '#/definitions/FabricError'
  /Faults/$/Cancel:
    post:
      operationId: microsoftAzureCanceloperation
      summary: Microsoft Azure Cancels A User Induced Fault Operation
      description: 'The following APIs start fault operations that may be cancelled by using CancelOperation: StartDataLoss, StartQuorumLoss, StartPartitionRestart, StartNodeTransition.<br><br>If force is false, then the specified user-induced operation will be gracefully stopped and cleaned up.  If force is true, the command will be aborted, and some internal state<br>may be left behind.  Specifying force as true should be used with care.  Calling this API with force set to true is not allowed until this API has already<br>been called on the same test command with force set to false first, or unless the test command already has an OperationState of OperationState.RollingBack.<br>Clarification: OperationState.RollingBack means that the system will be/is cleaning up internal system state caused by executing the command.  It will not restore data if the<br>test command was to cause data loss.  For example, if you call StartDataLoss then call this API, the system will only clean up internal state from running the command.<br>It will not restore the target partition''s data, if the command progressed far enough to cause data loss.<br><br>Important note:  if this API is invoked with force==true, internal state may be left behind.'
      tags:
      - Faults
      parameters:
      - $ref: '#/parameters/ApiVersion_6-0_RequiredQueryParam'
      - $ref: '#/parameters/FaultOperationIdRequiredQueryParam'
      - $ref: '#/parameters/ForceRequiredQueryParam'
      - $ref: '#/parameters/TimeoutOptionalQueryParam'
      responses:
        '200':
          description: A successful operation will return 200 status code.
        default:
          description: The detailed error response.
          schema:
            $ref: '#/definitions/FabricError'
definitions:
  PartitionRestartProgress:
    description: Information about a partition restart user-induced operation.
    properties:
      State:
        $ref: '#/definitions/OperationState'
        description: The state of the operation.
      RestartPartitionResult:
        $ref: '#/definitions/RestartPartitionResult'
        description: Represents information about an operation in a terminal state (Completed or Faulted).
  FabricErrorError:
    description: Error object containing error code and error message.
    properties:
      Code:
        $ref: '#/definitions/FabricErrorCodes'
        description: "Defines the fabric error codes that be returned as part of the error object in response to Service Fabric API operations that are not successful. Following are the error code values that can be returned for a specific HTTP status code.\n\n  - Possible values of the error code for HTTP status code 400 (Bad Request)\n    - \"FABRIC_E_INVALID_PARTITION_KEY\"\n    - \"FABRIC_E_IMAGEBUILDER_VALIDATION_ERROR\"\n    - \"FABRIC_E_INVALID_ADDRESS\"\n    - \"FABRIC_E_APPLICATION_NOT_UPGRADING\"\n    - \"FABRIC_E_APPLICATION_UPGRADE_VALIDATION_ERROR\"\n    - \"FABRIC_E_FABRIC_NOT_UPGRADING\"\n    - \"FABRIC_E_FABRIC_UPGRADE_VALIDATION_ERROR\"\n    - \"FABRIC_E_INVALID_CONFIGURATION\"\n    - \"FABRIC_E_INVALID_NAME_URI\"\n    - \"FABRIC_E_PATH_TOO_LONG\"\n    - \"FABRIC_E_KEY_TOO_LARGE\"\n    - \"FABRIC_E_SERVICE_AFFINITY_CHAIN_NOT_SUPPORTED\"\n    - \"FABRIC_E_INVALID_ATOMIC_GROUP\"\n    - \"FABRIC_E_VALUE_EMPTY\"\n    - \"FABRIC_E_BACKUP_IS_ENABLED\"\n    - \"FABRIC_E_RESTORE_SOURCE_TARGET_PARTITION_MISMATCH\"\n    - \"FABRIC_E_INVALID_FOR_STATELESS_SERVICES\"\n    - \"FABRIC_E_INVALID_SERVICE_SCALING_POLICY\"\n    - \"E_INVALIDARG\"\n\n  - Possible values of the error code for HTTP status code 404 (Not Found)\n    - \"FABRIC_E_NODE_NOT_FOUND\"\n    - \"FABRIC_E_APPLICATION_TYPE_NOT_FOUND\"\n    - \"FABRIC_E_APPLICATION_NOT_FOUND\"\n    - \"FABRIC_E_SERVICE_TYPE_NOT_FOUND\"\n    - \"FABRIC_E_SERVICE_DOES_NOT_EXIST\"\n    - \"FABRIC_E_SERVICE_TYPE_TEMPLATE_NOT_FOUND\"\n    - \"FABRIC_E_CONFIGURATION_SECTION_NOT_FOUND\"\n    - \"FABRIC_E_PARTITION_NOT_FOUND\"\n    - \"FABRIC_E_REPLICA_DOES_NOT_EXIST\"\n    - \"FABRIC_E_SERVICE_GROUP_DOES_NOT_EXIST\"\n    - \"FABRIC_E_CONFIGURATION_PARAMETER_NOT_FOUND\"\n    - \"FABRIC_E_DIRECTORY_NOT_FOUND\"\n    - \"FABRIC_E_FABRIC_VERSION_NOT_FOUND\"\n    - \"FABRIC_E_FILE_NOT_FOUND\"\n    - \"FABRIC_E_NAME_DOES_NOT_EXIST\"\n    - \"FABRIC_E_PROPERTY_DOES_NOT_EXIST\"\n    - \"FABRIC_E_ENUMERATION_COMPLETED\"\n    - \"FABRIC_E_SERVICE_MANIFEST_NOT_FOUND\"\n    - \"FABRIC_E_KEY_NOT_FOUND\"\n    - \"FABRIC_E_HEALTH_ENTITY_NOT_FOUND\"\n    - \"FABRIC_E_BACKUP_NOT_ENABLED\"\n    - \"FABRIC_E_BACKUP_POLICY_NOT_EXISTING\"\n    - \"FABRIC_E_FAULT_ANALYSIS_SERVICE_NOT_EXISTING\"\n    - \"FABRIC_E_IMAGEBUILDER_RESERVED_DIRECTORY_ERROR\"\n\n  - Possible values of the error code for HTTP status code 409 (Conflict)\n    - \"FABRIC_E_APPLICATION_TYPE_ALREADY_EXISTS\"\n    - \"FABRIC_E_APPLICATION_ALREADY_EXISTS\"\n    - \"FABRIC_E_APPLICATION_ALREADY_IN_TARGET_VERSION\"\n    - \"FABRIC_E_APPLICATION_TYPE_PROVISION_IN_PROGRESS\"\n    - \"FABRIC_E_APPLICATION_UPGRADE_IN_PROGRESS\"\n    - \"FABRIC_E_SERVICE_ALREADY_EXISTS\"\n    - \"FABRIC_E_SERVICE_GROUP_ALREADY_EXISTS\"\n    - \"FABRIC_E_APPLICATION_TYPE_IN_USE\"\n    - \"FABRIC_E_FABRIC_ALREADY_IN_TARGET_VERSION\"\n    - \"FABRIC_E_FABRIC_VERSION_ALREADY_EXISTS\"\n    - \"FABRIC_E_FABRIC_VERSION_IN_USE\"\n    - \"FABRIC_E_FABRIC_UPGRADE_IN_PROGRESS\"\n    - \"FABRIC_E_NAME_ALREADY_EXISTS\"\n    - \"FABRIC_E_NAME_NOT_EMPTY\"\n    - \"FABRIC_E_PROPERTY_CHECK_FAILED\"\n    - \"FABRIC_E_SERVICE_METADATA_MISMATCH\"\n    - \"FABRIC_E_SERVICE_TYPE_MISMATCH\"\n    - \"FABRIC_E_HEALTH_STALE_REPORT\"\n    - \"FABRIC_E_SEQUENCE_NUMBER_CHECK_FAILED\"\n    - \"FABRIC_E_NODE_HAS_NOT_STOPPED_YET\"\n    - \"FABRIC_E_INSTANCE_ID_MISMATCH\"\n    - \"FABRIC_E_BACKUP_IN_PROGRESS\"\n    - \"FABRIC_E_RESTORE_IN_PROGRESS\"\n    - \"FABRIC_E_BACKUP_POLICY_ALREADY_EXISTING\"\n\n  - Possible values of the error code for HTTP status code 413 (Request Entity Too Large)\n    - \"FABRIC_E_VALUE_TOO_LARGE\"\n\n  - Possible values of the error code for HTTP status code 500 (Internal Server Error)\n    - \"FABRIC_E_NODE_IS_UP\"\n    - \"E_FAIL\"\n    - \"FABRIC_E_SINGLE_INSTANCE_APPLICATION_ALREADY_EXISTS\"\n    - \"FABRIC_E_SINGLE_INSTANCE_APPLICATION_NOT_FOUND\"\n    - \"FABRIC_E_VOLUME_ALREADY_EXISTS\"\n    - \"FABRIC_E_VOLUME_NOT_FOUND\"\n    - \"SerializationError\"\n\n  - Possible values of the error code for HTTP status code 503 (Service Unavailable)\n    - \"FABRIC_E_NO_WRITE_QUORUM\"\n    - \"FABRIC_E_NOT_PRIMARY\"\n    - \"FABRIC_E_NOT_READY\"\n    - \"FABRIC_E_RECONFIGURATION_PENDING\"\n    - \"FABRIC_E_SERVICE_OFFLINE\"\n    - \"E_ABORT\"\n    - \"FABRIC_E_VALUE_TOO_LARGE\"\n\n  - Possible values of the error code for HTTP status code 504 (Gateway Timeout)\n    - \"FABRIC_E_COMMUNICATION_ERROR\"\n    - \"FABRIC_E_OPERATION_NOT_COMPLETE\"\n    - \"FABRIC_E_TIMEOUT\""
      Message:
        type: string
        description: Error message.
    required:
    - Code
  OperationState:
    type: string
    description: The state of the operation.
    enum:
    - Invalid
    - Running
    - RollingBack
    - Completed
    - Faulted
    - Cancelled
    - ForceCancelled
    x-ms-enum:
      name: OperationState
      modelAsString: true
      values:
      - value: Invalid
        description: The operation state is invalid.
      - value: Running
        description: The operation is in progress.
      - value: RollingBack
        description: The operation is rolling back internal system state because it encountered a fatal error or was cancelled by the user.  "RollingBack"     does not refer to user state.  For example, if CancelOperation is called on a command of type PartitionDataLoss, state of "RollingBack" does not mean service data is being restored (assuming the command has progressed far enough to cause data loss). It means the system is rolling back/cleaning up internal system state associated with the command.
      - value: Completed
        description: The operation has completed successfully and is no longer running.
      - value: Faulted
        description: The operation has failed and is no longer running.
      - value: Cancelled
        description: The operation was cancelled by the user using CancelOperation, and is no longer running.
      - value: ForceCancelled
        description: The operation was cancelled by the user using CancelOperation, with the force parameter set to true.  It is no longer running.  Refer to CancelOperation for more details.
  OperationStatusList:
    type: array
    description: A list of OperationStatus objects.
    items:
      $ref: '#/definitions/OperationStatus'
  PartitionId:
    type: string
    format: uuid
    description: An internal ID used by Service Fabric to uniquely identify a partition. This is a randomly generated GUID when the service was created. The partition ID is unique and does not change for the lifetime of the service. If the same service was deleted and recreated the IDs of its partitions would be different.
  OperationId:
    type: string
    format: uuid
    description: A GUID that identifies a call to this API.  This is also passed into the corresponding GetProgress API.
  SelectedPartition:
    description: This class returns information about the partition that the user-induced operation acted upon.
    properties:
      ServiceName:
        $ref: '#/definitions/ServiceName'
        description: The name of the service the partition belongs to.
      PartitionId:
        $ref: '#/definitions/PartitionId'
        description: An internal ID used by Service Fabric to uniquely identify a partition. This is a randomly generated GUID when the service was created. The partition ID is unique and does not change for the lifetime of the service. If the same service was deleted and recreated the IDs of its partitions would be different.
  OperationStatus:
    description: Contains the OperationId, OperationState, and OperationType for user-induced operations.
    properties:
      OperationId:
        $ref: '#/definitions/OperationId'
        description: A GUID that identifies a call to this API.  This is also passed into the corresponding GetProgress API.
      State:
        $ref: '#/definitions/OperationState'
        description: The state of the operation.
      Type:
        $ref: '#/definitions/OperationType'
        description: The type of the operation.
  ServiceName:
    type: string
    description: The full name of the service with 'fabric:' URI scheme.
  FabricErrorCodes:
    type: string
    description: "Defines the fabric error codes that be returned as part of the error object in response to Service Fabric API operations that are not successful. Following are the error code values that can be returned for a specific HTTP status code.\n\n  - Possible values of the error code for HTTP status code 400 (Bad Request)\n    - \"FABRIC_E_INVALID_PARTITION_KEY\"\n    - \"FABRIC_E_IMAGEBUILDER_VALIDATION_ERROR\"\n    - \"FABRIC_E_INVALID_ADDRESS\"\n    - \"FABRIC_E_APPLICATION_NOT_UPGRADING\"\n    - \"FABRIC_E_APPLICATION_UPGRADE_VALIDATION_ERROR\"\n    - \"FABRIC_E_FABRIC_NOT_UPGRADING\"\n    - \"FABRIC_E_FABRIC_UPGRADE_VALIDATION_ERROR\"\n    - \"FABRIC_E_INVALID_CONFIGURATION\"\n    - \"FABRIC_E_INVALID_NAME_URI\"\n    - \"FABRIC_E_PATH_TOO_LONG\"\n    - \"FABRIC_E_KEY_TOO_LARGE\"\n    - \"FABRIC_E_SERVICE_AFFINITY_CHAIN_NOT_SUPPORTED\"\n    - \"FABRIC_E_INVALID_ATOMIC_GROUP\"\n    - \"FABRIC_E_VALUE_EMPTY\"\n    - \"FABRIC_E_BACKUP_IS_ENABLED\"\n    - \"FABRIC_E_RESTORE_SOURCE_TARGET_PARTITION_MISMATCH\"\n    - \"FABRIC_E_INVALID_FOR_STATELESS_SERVICES\"\n    - \"FABRIC_E_INVALID_SERVICE_SCALING_POLICY\"\n    - \"E_INVALIDARG\"\n\n  - Possible values of the error code for HTTP status code 404 (Not Found)\n    - \"FABRIC_E_NODE_NOT_FOUND\"\n    - \"FABRIC_E_APPLICATION_TYPE_NOT_FOUND\"\n    - \"FABRIC_E_APPLICATION_NOT_FOUND\"\n    - \"FABRIC_E_SERVICE_TYPE_NOT_FOUND\"\n    - \"FABRIC_E_SERVICE_DOES_NOT_EXIST\"\n    - \"FABRIC_E_SERVICE_TYPE_TEMPLATE_NOT_FOUND\"\n    - \"FABRIC_E_CONFIGURATION_SECTION_NOT_FOUND\"\n    - \"FABRIC_E_PARTITION_NOT_FOUND\"\n    - \"FABRIC_E_REPLICA_DOES_NOT_EXIST\"\n    - \"FABRIC_E_SERVICE_GROUP_DOES_NOT_EXIST\"\n    - \"FABRIC_E_CONFIGURATION_PARAMETER_NOT_FOUND\"\n    - \"FABRIC_E_DIRECTORY_NOT_FOUND\"\n    - \"FABRIC_E_FABRIC_VERSION_NOT_FOUND\"\n    - \"FABRIC_E_FILE_NOT_FOUND\"\n    - \"FABRIC_E_NAME_DOES_NOT_EXIST\"\n    - \"FABRIC_E_PROPERTY_DOES_NOT_EXIST\"\n    - \"FABRIC_E_ENUMERATION_COMPLETED\"\n    - \"FABRIC_E_SERVICE_MANIFEST_NOT_FOUND\"\n    - \"FABRIC_E_KEY_NOT_FOUND\"\n    - \"FABRIC_E_HEALTH_ENTITY_NOT_FOUND\"\n    - \"FABRIC_E_BACKUP_NOT_ENABLED\"\n    - \"FABRIC_E_BACKUP_POLICY_NOT_EXISTING\"\n    - \"FABRIC_E_FAULT_ANALYSIS_SERVICE_NOT_EXISTING\"\n    - \"FABRIC_E_IMAGEBUILDER_RESERVED_DIRECTORY_ERROR\"\n\n  - Possible values of the error code for HTTP status code 409 (Conflict)\n    - \"FABRIC_E_APPLICATION_TYPE_ALREADY_EXISTS\"\n    - \"FABRIC_E_APPLICATION_ALREADY_EXISTS\"\n    - \"FABRIC_E_APPLICATION_ALREADY_IN_TARGET_VERSION\"\n    - \"FABRIC_E_APPLICATION_TYPE_PROVISION_IN_PROGRESS\"\n    - \"FABRIC_E_APPLICATION_UPGRADE_IN_PROGRESS\"\n    - \"FABRIC_E_SERVICE_ALREADY_EXISTS\"\n    - \"FABRIC_E_SERVICE_GROUP_ALREADY_EXISTS\"\n    - \"FABRIC_E_APPLICATION_TYPE_IN_USE\"\n    - \"FABRIC_E_FABRIC_ALREADY_IN_TARGET_VERSION\"\n    - \"FABRIC_E_FABRIC_VERSION_ALREADY_EXISTS\"\n    - \"FABRIC_E_FABRIC_VERSION_IN_USE\"\n    - \"FABRIC_E_FABRIC_UPGRADE_IN_PROGRESS\"\n    - \"FABRIC_E_NAME_ALREADY_EXISTS\"\n    - \"FABRIC_E_NAME_NOT_EMPTY\"\n    - \"FABRIC_E_PROPERTY_CHECK_FAILED\"\n    - \"FABRIC_E_SERVICE_METADATA_MISMATCH\"\n    - \"FABRIC_E_SERVICE_TYPE_MISMATCH\"\n    - \"FABRIC_E_HEALTH_STALE_REPORT\"\n    - \"FABRIC_E_SEQUENCE_NUMBER_CHECK_FAILED\"\n    - \"FABRIC_E_NODE_HAS_NOT_STOPPED_YET\"\n    - \"FABRIC_E_INSTANCE_ID_MISMATCH\"\n    - \"FABRIC_E_BACKUP_IN_PROGRESS\"\n    - \"FABRIC_E_RESTORE_IN_PROGRESS\"\n    - \"FABRIC_E_BACKUP_POLICY_ALREADY_EXISTING\"\n\n  - Possible values of the error code for HTTP status code 413 (Request Entity Too Large)\n    - \"FABRIC_E_VALUE_TOO_LARGE\"\n\n  - Possible values of the error code for HTTP status code 500 (Internal Server Error)\n    - \"FABRIC_E_NODE_IS_UP\"\n    - \"E_FAIL\"\n    - \"FABRIC_E_SINGLE_INSTANCE_APPLICATION_ALREADY_EXISTS\"\n    - \"FABRIC_E_SINGLE_INSTANCE_APPLICATION_NOT_FOUND\"\n    - \"FABRIC_E_VOLUME_ALREADY_EXISTS\"\n    - \"FABRIC_E_VOLUME_NOT_FOUND\"\n    - \"SerializationError\"\n\n  - Possible values of the error code for HTTP status code 503 (Service Unavailable)\n    - \"FABRIC_E_NO_WRITE_QUORUM\"\n    - \"FABRIC_E_NOT_PRIMARY\"\n    - \"FABRIC_E_NOT_READY\"\n    - \"FABRIC_E_RECONFIGURATION_PENDING\"\n    - \"FABRIC_E_SERVICE_OFFLINE\"\n    - \"E_ABORT\"\n    - \"FABRIC_E_VALUE_TOO_LARGE\"\n\n  - Possible values of the error code for HTTP status code 504 (Gateway Timeout)\n    - \"FABRIC_E_COMMUNICATION_ERROR\"\n    - \"FABRIC_E_OPERATION_NOT_COMPLETE\"\n    - \"FABRIC_E_TIMEOUT\""
    enum:
    - FABRIC_E_INVALID_PARTITION_KEY
    - FABRIC_E_IMAGEBUILDER_VALIDATION_ERROR
    - FABRIC_E_INVALID_ADDRESS
    - FABRIC_E_APPLICATION_NOT_UPGRADING
    - FABRIC_E_APPLICATION_UPGRADE_VALIDATION_ERROR
    - FABRIC_E_FABRIC_NOT_UPGRADING
    - FABRIC_E_FABRIC_UPGRADE_VALIDATION_ERROR
    - FABRIC_E_INVALID_CONFIGURATION
    - FABRIC_E_INVALID_NAME_URI
    - FABRIC_E_PATH_TOO_LONG
    - FABRIC_E_KEY_TOO_LARGE
    - FABRIC_E_SERVICE_AFFINITY_CHAIN_NOT_SUPPORTED
    - FABRIC_E_INVALID_ATOMIC_GROUP
    - FABRIC_E_VALUE_EMPTY
    - FABRIC_E_NODE_NOT_FOUND
    - FABRIC_E_APPLICATION_TYPE_NOT_FOUND
    - FABRIC_E_APPLICATION_NOT_FOUND
    - FABRIC_E_SERVICE_TYPE_NOT_FOUND
    - FABRIC_E_SERVICE_DOES_NOT_EXIST
    - FABRIC_E_SERVICE_TYPE_TEMPLATE_NOT_FOUND
    - FABRIC_E_CONFIGURATION_SECTION_NOT_FOUND
    - FABRIC_E_PARTITION_NOT_FOUND
    - FABRIC_E_REPLICA_DOES_NOT_EXIST
    - FABRIC_E_SERVICE_GROUP_DOES_NOT_EXIST
    - FABRIC_E_CONFIGURATION_PARAMETER_NOT_FOUND
    - FABRIC_E_DIRECTORY_NOT_FOUND
    - FABRIC_E_FABRIC_VERSION_NOT_FOUND
    - FABRIC_E_FILE_NOT_FOUND
    - FABRIC_E_NAME_DOES_NOT_EXIST
    - FABRIC_E_PROPERTY_DOES_NOT_EXIST
    - FABRIC_E_ENUMERATION_COMPLETED
    - FABRIC_E_SERVICE_MANIFEST_NOT_FOUND
    - FABRIC_E_KEY_NOT_FOUND
    - FABRIC_E_HEALTH_ENTITY_NOT_FOUND
    - FABRIC_E_APPLICATION_TYPE_ALREADY_EXISTS
    - FABRIC_E_APPLICATION_ALREADY_EXISTS
    - FABRIC_E_APPLICATION_ALREADY_IN_TARGET_VERSION
    - FABRIC_E_APPLICATION_TYPE_PROVISION_IN_PROGRESS
    - FABRIC_E_APPLICATION_UPGRADE_IN_PROGRESS
    - FABRIC_E_SERVICE_ALREADY_EXISTS
    - FABRIC_E_SERVICE_GROUP_ALREADY_EXISTS
    - FABRIC_E_APPLICATION_TYPE_IN_USE
    - FABRIC_E_FABRIC_ALREADY_IN_TARGET_VERSION
    - FABRIC_E_FABRIC_VERSION_ALREADY_EXISTS
    - FABRIC_E_FABRIC_VERSION_IN_USE
    - FABRIC_E_FABRIC_UPGRADE_IN_PROGRESS
    - FABRIC_E_NAME_ALREADY_EXISTS
    - FABRIC_E_NAME_NOT_EMPTY
    - FABRIC_E_PROPERTY_CHECK_FAILED
    - FABRIC_E_SERVICE_METADATA_MISMATCH
    - FABRIC_E_SERVICE_TYPE_MISMATCH
    - FABRIC_E_HEALTH_STALE_REPORT
    - FABRIC_E_SEQUENCE_NUMBER_CHECK_FAILED
    - FABRIC_E_NODE_HAS_NOT_STOPPED_YET
    - FABRIC_E_INSTANCE_ID_MISMATCH
    - FABRIC_E_VALUE_TOO_LARGE
    - FABRIC_E_NO_WRITE_QUORUM
    - FABRIC_E_NOT_PRIMARY
    - FABRIC_E_NOT_READY
    - FABRIC_E_RECONFIGURATION_PENDING
    - FABRIC_E_SERVICE_OFFLINE
    - E_ABORT
    - FABRIC_E_COMMUNICATION_ERROR
    - FABRIC_E_OPERATION_NOT_COMPLETE
    - FABRIC_E_TIMEOUT
    - FABRIC_E_NODE_IS_UP
    - E_FAIL
    - FABRIC_E_BACKUP_IS_ENABLED
    - FABRIC_E_RESTORE_SOURCE_TARGET_PARTITION_MISMATCH
    - FABRIC_E_INVALID_FOR_STATELESS_SERVICES
    - FABRIC_E_BACKUP_NOT_ENABLED
    - FABRIC_E_BACKUP_POLICY_NOT_EXISTING
    - FABRIC_E_FAULT_ANALYSIS_SERVICE_NOT_EXISTING
    - FABRIC_E_BACKUP_IN_PROGRESS
    - FABRIC_E_RESTORE_IN_PROGRESS
    - FABRIC_E_BACKUP_POLICY_ALREADY_EXISTING
    - FABRIC_E_INVALID_SERVICE_SCALING_POLICY
    - E_INVALIDARG
    - FABRIC_E_SINGLE_INSTANCE_APPLICATION_ALREADY_EXISTS
    - FABRIC_E_SINGLE_INSTANCE_APPLICATION_NOT_FOUND
    - FABRIC_E_VOLUME_ALREADY_EXISTS
    - FABRIC_E_VOLUME_NOT_FOUND
    - SerializationError
    - FABRIC_E_IMAGEBUILDER_RESERVED_DIRECTORY_ERROR
    x-ms-enum:
      name: FabricErrorCodes
      modelAsString: true
      values:
      - value: FABRIC_E_INVALID_PARTITION_KEY
      - value: FABRIC_E_IMAGEBUILDER_VALIDATION_ERROR
      - value: FABRIC_E_INVALID_ADDRESS
      - value: FABRIC_E_APPLICATION_NOT_UPGRADING
      - value: FABRIC_E_APPLICATION_UPGRADE_VALIDATION_ERROR
      - value: FABRIC_E_FABRIC_NOT_UPGRADING
      - value: FABRIC_E_FABRIC_UPGRADE_VALIDATION_ERROR
      - value: FABRIC_E_INVALID_CONFIGURATION
      - value: FABRIC_E_INVALID_NAME_URI
      - value: FABRIC_E_PATH_TOO_LONG
      - value: FABRIC_E_KEY_TOO_LARGE
      - value: FABRIC_E_SERVICE_AFFINITY_CHAIN_NOT_SUPPORTED
      - value: FABRIC_E_INVALID_ATOMIC_GROUP
      - value: FABRIC_E_VALUE_EMPTY
      - value: FABRIC_E_NODE_NOT_FOUND
      - value: FABRIC_E_APPLICATION_TYPE_NOT_FOUND
      - value: FABRIC_E_APPLICATION_NOT_FOUND
      - value: FABRIC_E_SERVICE_TYPE_NOT_FOUND
      - value: FABRIC_E_SERVICE_DOES_NOT_EXIST
      - value: FABRIC_E_SERVICE_TYPE_TEMPLATE_NOT_FOUND
      - value: FABRIC_E_CONFIGURATION_SECTION_NOT_FOUND
      - value: FABRIC_E_PARTITION_NOT_FOUND
      - value: FABRIC_E_REPLICA_DOES_NOT_EXIST
      - value: FABRIC_E_SERVICE_GROUP_DOES_NOT_EXIST
      - value: FABRIC_E_CONFIGURATION_PARAMETER_NOT_FOUND
      - value: FABRIC_E_DIRECTORY_NOT_FOUND
      - value: FABRIC_E_FABRIC_VERSION_NOT_FOUND
      - value: FABRIC_E_FILE_NOT_FOUND
      - value: FABRIC_E_NAME_DOES_NOT_EXIST
      - value: FABRIC_E_PROPERTY_DOES_NOT_EXIST
      - value: FABRIC_E_ENUMERATION_COMPLETED
      - value: FABRIC_E_SERVICE_MANIFEST_NOT_FOUND
      - value: FABRIC_E_KEY_NOT_FOUND
      - value: FABRIC_E_HEALTH_ENTITY_NOT_FOUND
      - value: FABRIC_E_APPLICATION_TYPE_ALREADY_EXISTS
      - value: FABRIC_E_APPLICATION_ALREADY_EXISTS
      - value: FABRIC_E_APPLICATION_ALREADY_IN_TARGET_VERSION
      - value: FABRIC_E_APPLICATION_TYPE_PROVISION_IN_PROGRESS
      - value: F

# --- truncated at 32 KB (46 KB total) ---
# Full source: https://raw.githubusercontent.com/api-evangelist/microsoft-azure/refs/heads/main/openapi/microsoft-azure-faults-api-openapi.yml
Microsoft Azure Faults API

Documentation

Specifications

Other Resources

OpenAPI Specification
