Cisco Intersight Security API

openapi: 3.2.0
info:
  description: 'Cisco Intersight is a management platform delivered as a service with embedded analytics for your Cisco and

    3rd party IT infrastructure. This platform offers an intelligent level of management that enables

    IT organizations to analyze, simplify, and automate their environments in more advanced ways than the prior

    generations of tools. Cisco Intersight provides an integrated and intuitive management experience for

    resources in the traditional data center as well as at the edge. With flexible deployment options to address

    complex security needs, getting started with Intersight is quick and easy.

    Cisco Intersight has deep integration with Cisco UCS and HyperFlex systems allowing for remote deployment,

    configuration, and ongoing maintenance. The model-based deployment works for a single system in a remote

    location or hundreds of systems in a data center and enables rapid, standardized configuration and deployment.

    It also streamlines maintaining those systems whether you are working with small or very large configurations.

    The Intersight OpenAPI document defines the complete set of properties that are returned in the

    HTTP response. From that perspective, a client can expect that no additional properties are returned,

    unless these properties are explicitly defined in the OpenAPI document.

    However, when a client uses an older version of the Intersight OpenAPI document, the server may

    send additional properties because the software is more recent than the client. In that case, the client

    may receive properties that it does not know about.

    Some generated SDKs perform a strict validation of the HTTP response body against the OpenAPI document.

    This document was created on 2026-08-07T06:46:04Z.'
  version: 1.0.11-20260807064027971
  title: Cisco Intersight Server Security API
  license:
    name: Apache License, Version 2.0
    url: https://www.apache.org/licenses/LICENSE-2.0.html
  contact:
    name: Intersight API support
    url: https://intersight.com/help
    email: intersight@cisco.com
  x-provenance:
    method: harvested
    authored_by: Cisco Intersight
    harvested_by: API Evangelist
    harvested_on: '2026-08-19'
    first_party: true
    provider_published: true
    source_host: cdn.intersight.com
    note: Cisco publishes the full Intersight OpenAPI 3.0.2 anonymously from its CDN (27.5MB master document; 3,963 operations / 2,448 paths / 5,612 schemas) plus 11 per-service documents covering 100% of the master's paths. Byte-identity reconfirmed 2026-08-19 by SHA-256. Note intersight.com itself is a soft-404 farm — the contract is on the CDN, not the app host.
  x-evidence:
  - type: source
    url: https://cdn.intersight.com/components/an-apidocs/1.0.11-20260807064027971/model/intersight-openapi-v3-1.0.11-20260807064027971.json
  - type: source
    url: https://intersight.com/apidocs/apirefs/
servers:
- url: https://{server}
  variables:
    server:
      default: intersight.com
  description: The Intersight URL for the cloud-based infrastructure management APIs.
tags:
- name: security
paths:
  /api/v1/security/Units:
    get:
      tags:
      - security
      summary: Read a 'security.Unit' resource.
      operationId: GetSecurityUnitList
      security:
      - cookieAuth: []
      - http_signature: []
      - oAuth2:
        - PRIVSET.Account Administrator
        - PRIVSET.Manage Servers
        - PRIVSET.Read-Only
        - PRIVSET.Read-only servers
        - PRIVSET.View Servers
        - READ.security.Unit
        - ROLE.Account Administrator
        - ROLE.Read-Only
      parameters:
      - $ref: '#/components/parameters/filterParam'
      - $ref: '#/components/parameters/orderbyParam'
      - $ref: '#/components/parameters/topParam'
      - $ref: '#/components/parameters/skipParam'
      - $ref: '#/components/parameters/selectParam'
      - $ref: '#/components/parameters/expandParam'
      - $ref: '#/components/parameters/applyParam'
      - $ref: '#/components/parameters/countParam'
      - $ref: '#/components/parameters/inlinecountParam'
      - $ref: '#/components/parameters/atParam'
      - $ref: '#/components/parameters/tagsParam'
      responses:
        '200':
          description: List of 'security.Unit' resources for the given filter criteria
          headers:
            Set-Cookie:
              $ref: '#/components/headers/Set-Cookie'
            x-starship-traceid:
              $ref: '#/components/headers/x-starship-traceid'
            Content-Disposition:
              $ref: '#/components/headers/Content-Disposition'
            Content-Length:
              $ref: '#/components/headers/Content-Length'
          content:
            application/json:
              schema:
                $ref: '#/components/schemas/security.Unit.Response'
            text/csv:
              schema:
                $ref: intersight-system-v3-1.0.11-20260807064027971.json#/components/schemas/CsvFile
            application/vnd.openxmlformats-officedocument.spreadsheetml.sheet:
              schema:
                $ref: intersight-system-v3-1.0.11-20260807064027971.json#/components/schemas/ExcelFile
        '400':
          $ref: '#/components/responses/http_status_400'
        '401':
          $ref: '#/components/responses/http_status_401'
        '403':
          $ref: '#/components/responses/http_status_403'
        '404':
          $ref: '#/components/responses/http_status_404'
        default:
          $ref: '#/components/responses/default'
  /api/v1/security/Units/{Moid}:
    get:
      tags:
      - security
      summary: Read a 'security.Unit' resource.
      operationId: GetSecurityUnitByMoid
      security:
      - cookieAuth: []
      - http_signature: []
      - oAuth2:
        - PRIVSET.Account Administrator
        - PRIVSET.Manage Servers
        - PRIVSET.Read-Only
        - PRIVSET.Read-only servers
        - PRIVSET.View Servers
        - READ.security.Unit
        - ROLE.Account Administrator
        - ROLE.Read-Only
      parameters:
      - $ref: '#/components/parameters/moidParam'
      - $ref: '#/components/parameters/selectParam'
      - $ref: '#/components/parameters/expandParam'
      - $ref: '#/components/parameters/atParam'
      responses:
        '200':
          description: An instance of the 'security.Unit' resource.
          headers:
            Set-Cookie:
              $ref: '#/components/headers/Set-Cookie'
            x-starship-traceid:
              $ref: '#/components/headers/x-starship-traceid'
            Content-Disposition:
              $ref: '#/components/headers/Content-Disposition'
            Content-Length:
              $ref: '#/components/headers/Content-Length'
          content:
            application/json:
              schema:
                $ref: '#/components/schemas/security.Unit'
            text/csv:
              schema:
                $ref: intersight-system-v3-1.0.11-20260807064027971.json#/components/schemas/CsvFile
            application/vnd.openxmlformats-officedocument.spreadsheetml.sheet:
              schema:
                $ref: intersight-system-v3-1.0.11-20260807064027971.json#/components/schemas/ExcelFile
          links:
            GetSecurityUnitByMoid:
              operationId: GetSecurityUnitByMoid
              parameters:
                Moid: $response.body#/Moid
              description: The 'Moid' value returned in the response can be used as the 'Moid' parameter in 'GET /api/v1/security/Units/{Moid}'.
            GetIamAccountByMoid:
              $ref: '#/components/links/GetIamAccountByMoid'
            GetIamDomainGroupByMoid:
              $ref: '#/components/links/GetIamDomainGroupByMoid'
        '400':
          $ref: '#/components/responses/http_status_400'
        '401':
          $ref: '#/components/responses/http_status_401'
        '403':
          $ref: '#/components/responses/http_status_403'
        '404':
          $ref: '#/components/responses/http_status_404'
        default:
          $ref: '#/components/responses/default'
    post:
      tags:
      - security
      summary: Update a 'security.Unit' resource.
      operationId: UpdateSecurityUnit
      security:
      - cookieAuth: []
      - http_signature: []
      - oAuth2:
        - PRIVSET.Account Administrator
        - PRIVSET.Manage Servers
        - ROLE.Account Administrator
        - UPDATE.security.Unit
      parameters:
      - $ref: '#/components/parameters/moidParam'
      - $ref: '#/components/parameters/IfMatch'
      requestBody:
        description: The 'security.Unit' resource to update.
        required: true
        content:
          application/json:
            schema:
              $ref: '#/components/schemas/security.Unit'
          application/json-patch+json:
            schema:
              $ref: intersight-system-v3-1.0.11-20260807064027971.json#/components/schemas/PatchDocument
      responses:
        '200':
          description: The HTTP 200 status response code indicates that the request has succeeded and the 'security.Unit' resource was modified as requested. The 'security.Unit' resource is modified before this response is sent back and the resource is returned in the body of the message.
          headers:
            Set-Cookie:
              $ref: '#/components/headers/Set-Cookie'
            x-starship-traceid:
              $ref: '#/components/headers/x-starship-traceid'
          content:
            application/json:
              schema:
                $ref: '#/components/schemas/security.Unit'
          links:
            GetSecurityUnitByMoid:
              operationId: GetSecurityUnitByMoid
              parameters:
                Moid: $response.body#/Moid
              description: The 'Moid' value returned in the response can be used as the 'Moid' parameter in 'GET /api/v1/security/Units/{Moid}'.
            GetIamAccountByMoid:
              $ref: '#/components/links/GetIamAccountByMoid'
            GetIamDomainGroupByMoid:
              $ref: '#/components/links/GetIamDomainGroupByMoid'
        '400':
          $ref: '#/components/responses/http_status_400'
        '401':
          $ref: '#/components/responses/http_status_401'
        '403':
          $ref: '#/components/responses/http_status_403'
        '404':
          $ref: '#/components/responses/http_status_404'
        default:
          $ref: '#/components/responses/default'
    patch:
      tags:
      - security
      summary: Update a 'security.Unit' resource.
      operationId: PatchSecurityUnit
      security:
      - cookieAuth: []
      - http_signature: []
      - oAuth2:
        - PRIVSET.Account Administrator
        - PRIVSET.Manage Servers
        - ROLE.Account Administrator
        - UPDATE.security.Unit
      parameters:
      - $ref: '#/components/parameters/moidParam'
      - $ref: '#/components/parameters/IfMatch'
      requestBody:
        description: The 'security.Unit' resource to update.
        required: true
        content:
          application/json:
            schema:
              $ref: '#/components/schemas/security.Unit'
          application/json-patch+json:
            schema:
              $ref: intersight-system-v3-1.0.11-20260807064027971.json#/components/schemas/PatchDocument
      responses:
        '200':
          description: The HTTP 200 status response code indicates that the request has succeeded and the 'security.Unit' resource was patched as requested. The 'security.Unit' resource is patched before this response is sent back and the resource is returned in the body of the message.
          headers:
            Set-Cookie:
              $ref: '#/components/headers/Set-Cookie'
            x-starship-traceid:
              $ref: '#/components/headers/x-starship-traceid'
          content:
            application/json:
              schema:
                $ref: '#/components/schemas/security.Unit'
          links:
            GetSecurityUnitByMoid:
              operationId: GetSecurityUnitByMoid
              parameters:
                Moid: $response.body#/Moid
              description: The 'Moid' value returned in the response can be used as the 'Moid' parameter in 'GET /api/v1/security/Units/{Moid}'.
            GetIamAccountByMoid:
              $ref: '#/components/links/GetIamAccountByMoid'
            GetIamDomainGroupByMoid:
              $ref: '#/components/links/GetIamDomainGroupByMoid'
        '400':
          $ref: '#/components/responses/http_status_400'
        '401':
          $ref: '#/components/responses/http_status_401'
        '403':
          $ref: '#/components/responses/http_status_403'
        '404':
          $ref: '#/components/responses/http_status_404'
        default:
          $ref: '#/components/responses/default'
components:
  schemas:
    boot.HddDevice.Relationship:
      description: A relationship to the 'boot.HddDevice' resource, or the expanded 'boot.HddDevice' resource, or the 'null' value.
      x-one-of-name: boot.HddDevice.Relationship
      oneOf:
      - type: 'null'
      - $ref: intersight-system-v3-1.0.11-20260807064027971.json#/components/schemas/mo.MoRef
      - $ref: '#/components/schemas/boot.HddDevice'
      discriminator:
        propertyName: ClassId
    pci.Port.Relationship:
      description: A relationship to the 'pci.Port' resource, or the expanded 'pci.Port' resource, or the 'null' value.
      x-one-of-name: pci.Port.Relationship
      oneOf:
      - type: 'null'
      - $ref: intersight-system-v3-1.0.11-20260807064027971.json#/components/schemas/mo.MoRef
      - $ref: '#/components/schemas/pci.Port'
      discriminator:
        propertyName: ClassId
    certificatemanagement.Imc:
      title: IMC
      description: IMC certificate has both Certificate and private key that will be used for IMC.
      x-allOf-name: certificatemanagement.Imc
      allOf:
      - $ref: '#/components/schemas/certificatemanagement.CertificateBase'
      - type: object
        description: Definition of the list of properties defined in 'certificatemanagement.Imc', excluding properties defined in parent classes.
        required:
        - ClassId
        - ObjectType
        properties:
          ClassId:
            description: 'The fully-qualified name of the instantiated, concrete type.

              This property is used as a discriminator to identify the type of the payload

              when marshaling and unmarshaling data.'
            enum:
            - certificatemanagement.Imc
            default: certificatemanagement.Imc
            x-enum-as-string: true
          ObjectType:
            description: 'The fully-qualified name of the instantiated, concrete type.

              The value should be the same as the ''ClassId'' property.'
            enum:
            - certificatemanagement.Imc
            default: certificatemanagement.Imc
            x-enum-as-string: true
          CertType:
            description: 'Certificate Type for the certificate management.

              * `None` - Set certificate on the selected end point .

              * `KMIPClient` - Set KMIP certificate on the selected end point.'
            type: string
            enum:
            - None
            - KMIPClient
            default: None
            x-omitempty: true
          IsPrivatekeySet:
            description: Indicates whether the value of the 'privatekey' property has been set.
            type: boolean
            default: false
            readOnly: true
            x-omitempty: true
          Privatekey:
            description: Private Key which is used to validate the certificate.
            type: string
            writeOnly: true
            x-omitempty: true
    storage.VirtualDriveExtension:
      title: Storage:Virtual Drive Extension
      description: Information of virtual drives as reported by a storage controller. In certain cases like S-series servers, virtual drive information will be reported by the controller separately and this represents such information.
      x-allOf-name: storage.VirtualDriveExtension
      allOf:
      - $ref: '#/components/schemas/inventory.Base'
      - type: object
        description: Definition of the list of properties defined in 'storage.VirtualDriveExtension', excluding properties defined in parent classes.
        required:
        - ClassId
        - ObjectType
        properties:
          ClassId:
            description: 'The fully-qualified name of the instantiated, concrete type.

              This property is used as a discriminator to identify the type of the payload

              when marshaling and unmarshaling data.'
            enum:
            - storage.VirtualDriveExtension
            default: storage.VirtualDriveExtension
            x-enum-as-string: true
          ObjectType:
            description: 'The fully-qualified name of the instantiated, concrete type.

              The value should be the same as the ''ClassId'' property.'
            enum:
            - storage.VirtualDriveExtension
            default: storage.VirtualDriveExtension
            x-enum-as-string: true
          Bootable:
            description: The ability to boot from the virtual drive.
            type: string
            readOnly: true
            x-omitempty: true
          ContainerId:
            description: The container id of the virtual drive.
            type: integer
            format: int64
            readOnly: true
            x-omitempty: true
          DriveState:
            description: The state of the virtual drive.
            type: string
            readOnly: true
            x-omitempty: true
          Name:
            description: The name of the Virtual drive.
            type: string
            readOnly: true
            x-omitempty: true
          OperDeviceId:
            description: The operational device id of the virtual drive.
            type: string
            readOnly: true
            x-omitempty: true
          Uuid:
            description: The UUID assigned to the virtual drive.
            type: string
            readOnly: true
            x-omitempty: true
          VendorUuid:
            description: The UUID value of the vendor assigned to the virtual drive.
            type: string
            readOnly: true
            x-omitempty: true
          VirtualDriveDn:
            description: The distinguished name of the virtual drive for which the extended data is provided.
            type: string
            readOnly: true
            x-omitempty: true
          VirtualDriveId:
            description: The Id of the virtual drive.
            type: string
            readOnly: true
            x-omitempty: true
          InventoryDeviceInfo:
            $ref: '#/components/schemas/inventory.DeviceInfo.Relationship'
            description: 'A reference to a inventoryDeviceInfo resource.

              When the $expand query parameter is specified, the referenced resource is returned inline.'
            readOnly: true
          RegisteredDevice:
            $ref: intersight-system-v3-1.0.11-20260807064027971.json#/components/schemas/asset.DeviceRegistration.Relationship
            description: 'A reference to a assetDeviceRegistration resource.

              When the $expand query parameter is specified, the referenced resource is returned inline.'
            readOnly: true
          StorageController:
            $ref: '#/components/schemas/storage.Controller.Relationship'
            description: 'A reference to a storageController resource.

              When the $expand query parameter is specified, the referenced resource is returned inline.'
            readOnly: true
          VirtualDrive:
            $ref: '#/components/schemas/storage.VirtualDrive.Relationship'
            description: 'A reference to a storageVirtualDrive resource.

              When the $expand query parameter is specified, the referenced resource is returned inline.'
            readOnly: true
    pci.Endpoint.Relationship:
      description: A relationship to the 'pci.Endpoint' resource, or the expanded 'pci.Endpoint' resource, or the 'null' value.
      x-one-of-name: pci.Endpoint.Relationship
      oneOf:
      - type: 'null'
      - $ref: intersight-system-v3-1.0.11-20260807064027971.json#/components/schemas/mo.MoRef
      - $ref: '#/components/schemas/pci.Endpoint'
      discriminator:
        propertyName: ClassId
    compute.Physical:
      title: Compute:Physical
      description: Abstract class for all physical servers.
      x-allOf-name: compute.Physical
      allOf:
      - $ref: '#/components/schemas/equipment.Base'
      - type: object
        description: Definition of the list of properties defined in 'compute.Physical', excluding properties defined in parent classes.
        required:
        - ClassId
        - ObjectType
        properties:
          ClassId:
            description: 'The fully-qualified name of the instantiated, concrete type.

              This property is used as a discriminator to identify the type of the payload

              when marshaling and unmarshaling data.

              The enum values provides the list of concrete types that can be instantiated from this abstract type.'
            enum:
            - compute.Blade
            - compute.RackUnit
            x-enum-as-string: true
          ObjectType:
            description: 'The fully-qualified name of the instantiated, concrete type.

              The value should be the same as the ''ClassId'' property.

              The enum values provides the list of concrete types that can be instantiated from this abstract type.'
            enum:
            - compute.Blade
            - compute.RackUnit
            x-enum-as-string: true
          AdminPowerState:
            description: The desired power state of the server.
            type: string
            readOnly: true
            x-omitempty: true
          AlarmSummary:
            description: The summary of alarm counts based on the severity types (Critical or Warning).
            $ref: '#/components/schemas/compute.AlarmSummary'
            x-omitempty: true
          AssetTag:
            description: The user defined asset tag assigned to the server.
            type: string
            readOnly: true
            x-omitempty: true
          AvailableMemory:
            description: The amount of memory available on the server.
            type: integer
            format: int64
            readOnly: true
            x-omitempty: true
          BiosPostComplete:
            description: The BIOS POST completion status of the server.
            type: boolean
            x-omitempty: true
          BmcInventoryReady:
            description: The BMC inventory readiness status of the server.
            type: boolean
            x-omitempty: true
          BootLastState:
            description: 'The boot progress state of a rack or blade server.

              * `None` - The server is powered off.

              * `OSBootStarted` - The operating system boot process has started.

              * `OSRunning` - The operating system boot process has started and running.

              * `OEM` - The server is in an OEM-defined startup state.'
            type: string
            enum:
            - None
            - OSBootStarted
            - OSRunning
            - OEM
            default: None
            readOnly: true
            x-omitempty: true
          BootOemLastState:
            description: 'The last known OEM-defined startup state of a rack or blade server.

              * `None` - The server has not yet completed OEM initialization.

              * `PlatformInitializing` - The server is initializing after being powered on.'
            type: string
            enum:
            - None
            - PlatformInitializing
            default: None
            readOnly: true
            x-omitempty: true
          CoolingMode:
            description: 'Cooling mode representation of the server.

              * `Air` - Cooling mode of the device is set to Air.

              * `Immersion` - Cooling mode of the device is set to Immersion.'
            type: string
            enum:
            - Air
            - Immersion
            default: Air
            readOnly: true
            x-omitempty: true
          CpuCapacity:
            description: Total processing capacity of the server.
            type: number
            format: float
            readOnly: true
            x-omitempty: true
          DimmBlocklisting:
            description: 'The DIMM Blocklisting setting configured on the server.

              * `Unknown` - The configured state is unknown.

              * `Enabled` - The configured state is enabled.

              * `Disabled` - The configured state is disabled.'
            type: string
            enum:
            - Unknown
            - Enabled
            - Disabled
            default: Unknown
            readOnly: true
            x-omitempty: true
          FaultSummary:
            description: The fault summary for the server.
            deprecated: true
            x-sunset: '2027-03-01'
            type: integer
            format: int64
            x-omitempty: true
          FrontPanelLockState:
            description: 'The actual front panel state of the server.

              * `Unlock` - Front Panel of the server is set to Unlocked state.

              * `Lock` - Front Panel of the server is set to Locked state.'
            type: string
            enum:
            - Unlock
            - Lock
            default: Unlock
            x-omitempty: true
          HardwareUuid:
            description: The universally unique hardware identity of the server provided by the manufacturer.
            type: string
            x-omitempty: true
          HasE3SSupport:
            description: The flag to indicate server has the support for E3.S drives.
            type: boolean
            readOnly: true
            x-omitempty: true
          KvmIpAddresses:
            type:
            - array
            - 'null'
            items:
              description: The list of KVM Ip addresses for the server.
              $ref: '#/components/schemas/compute.IpAddress'
              x-omitempty: true
          KvmServerStateEnabled:
            description: The KVM server state of the server.
            type: boolean
            readOnly: true
            x-omitempty: true
          KvmVendor:
            description: The KVM Vendor for the server.
            type: string
            readOnly: true
            x-omitempty: true
          LastPowerStateChangedTime:
            description: The Last host power state changed time of the server.
            type: string
            readOnly: true
            x-omitempty: true
          Lifecycle:
            description: 'The lifecycle state of the server. This will map to the discovery lifecycle as represented in the server Identity object.

              * `None` - Default state of an equipment. This should be an initial state when no state is defined for an equipment.

              * `Active` - Default Lifecycle State for a physical entity.

              * `Decommissioned` - Decommission Lifecycle state.

              * `SlotReserved` - Blade is inserted in a slot that is reserved for Secure Router.

              * `DiscoveryInProgress` - DiscoveryInProgress Lifecycle state.

              * `DiscoveryFailed` - DiscoveryFailed Lifecycle state.

              * `FirmwareUpgradeInProgress` - Firmware upgrade is in progress on given physical entity.

              * `DiagnosticsInProgress` - Diagnostics is in progress on given physical entity.

              * `SecureEraseInProgress` - Secure Erase is in progress on given physical entity.

              * `ScrubInProgress` - Scrub is in progress on given physical entity.

              * `BladeMigrationInProgress` - Server slot migration is in progress on given physical entity.

              * `SlotMismatch` - The blade server is detected in a different chassis/slot than it was previously.

              * `Removed` - The blade server has been removed from its discovered slot, and not detected anywhere else. Blade inventory can be cleaned up by performing a software remove operation on the physically removed blade.

              * `Moved` - The blade server has been moved from its discovered location to a new location. Blade inventory can be updated by performing a rediscover operation on the moved blade.

              * `Replaced` - The blade server has been removed from its discovered location and another blade has been inserted in that location. Blade inventory can be cleaned up and updated by doing a software remove operation on the physically removed blade.

              * `MovedAndReplaced` - The blade server has been moved from its discovered location to a new location and another blade has been inserted into the old discovered location. Blade inventory can be updated by performing a rediscover operation on the moved blade.

              * `DecommissionAndRemoveInProgress` - Decommission and remove operation is in progress.

              * `DecommissionedForRemove` - Server is decommissioned and once it is physically pulled from chassis, it will be automatically removed from inventory.'
            type: string
            enum:
            - None
            - Active
            - Decommissioned
            - SlotReserved
            - DiscoveryInProgress
            - DiscoveryFailed
            - FirmwareUpgradeInProgress
            - DiagnosticsInProgress
            - SecureEraseInProgress
            - ScrubInProgress
            - BladeMigrationInProgress
            - SlotMismatch
            - Removed
            - Moved
            - Replaced
            - MovedAndReplaced
            - DecommissionAndRemoveInProgress
            - DecommissionedForRemove
            default: None
            readOnly: true
            x-omitempty: true
          ManagementMode:
            description: 'The management mode of the server.

              * `IntersightStandalone` - Intersight Standalone mode of operation.

              * `UCSM` - Unified Computing System Manager mode of operation.

              * `Intersight` - Intersight managed mode of operation.'
            type: string
            enum:
            - IntersightStandalone
            - UCSM
            - Intersight
            default: IntersightStandalone
            x-omitempty: true
          MemorySpeed:
            description: The maximum memory speed in MHz available on the server.
            type: string
            readOnly: true
            x-omitempty: true
          MgmtIpAddress:
            description: Management address of the server.
            type: string
            x-omitempty: true
          Name:
            description: The name of the UCS Fabric Interconnect cluster or Cisco Integrated Management Controller (CIMC). When this server is attached to a UCS Fabric Interconnect, the value of this property is the name of the UCS Fabric Interconnect along with chassis/server Id. When this server configured in standalone mode, the value of this property is the name of the Cisco Integrated Management Controller. when this server is configired in IMM mode, the value of this property contains model and chassis/server Id.
            type: string
            x-omitempty: true
          NumAdaptors:
            description: The total number of network adapters present on the server.
            type: integer
            format: int64
            readOnly: true
            x-omitempty: true
          NumCpuCores:
            description: The total number of CPU cores present on the server.
            type: integer
            format: int64
            readOnly: true
            x-omitempty: true
          NumCpuCoresEnabled:
            description: The total number of CPU cores enabled on the server.
            type: integer
            format: int64
            readOnly: true
            x-omitempty: true
          NumCpus:
            description: The total number of CPUs present on the server.
            type: integer
            format: int64
            readOnly: true
            x-omitempty: true
          NumEthHostInterfaces:
            description: The total number of vNICs which are visible to a host on the server.
            type: integer
            format: int64
            readOnly: true
            x-omitempty: true
          NumFcHostInterfaces:
            description: The total number of vHBAs which are visible to a hos

# --- truncated at 32 KB (1659 KB total) ---
# Full source: https://raw.githubusercontent.com/api-evangelist/intersight/refs/heads/main/openapi/intersight-security-api-openapi.yml