openapi: 3.0.3
info:
title: Call Forwarding Signal Age Verification Roaming status retrieval API
description: '# Overview
The Call Forwarding Signal API provides the API Consumer with
information about the status of the Call Forwarding Service on a specific
phone number. The main scope of the Call Forwarding Signal API is "anti
Fraud" to avoid fraudsters to use the Call Forwarding Service to carry
on a scam. Other use cases are anyway supported by the Call Forwarding
Signal API that also
provides additional endpoints to detect the general Call Forwarding
Service settings.
# Introduction
The Call Forwarding Service is provided by the Network to a phone
number. This service redirects the incoming call to that phone number
to an alternative destination such as another phone number or a voice mail
system. There are two main types of call forwarding settings:
unconditional and conditional.
The Call Forwarding Signal API can be invoked to detect if the unconditional
call forwarding service is active. The Call Forwarding Signal API can also
be invoked to
get the general status of the Call Forwarding Service (inactive,
conditional, unconditional). If conditional call forwarding is active,
the different type of settings are returned (''conditional_busy'',
''conditional_not_reachable'', ''conditional_no_answer'').
**Example use cases:**
[**Bank Frauds**](https://github.com/camaraproject/CallForwardingSignal/discussions/3#discussioncomment-8694420)
[**Alert Interception**](https://github.com/camaraproject/CallForwardingSignal/discussions/3#discussioncomment-8701847)
[**Call Forwarding Verification**](https://github.com/camaraproject/CallForwarding\Signal/discussions/3#discussioncomment-8915595)
# Quick Start
The Call Forwarding Signal API is a REST API based on the
CreateCallForwardingSignal resource.
This resource can be used, by the API Consumer, to specify the phone number
on which the Call Forwarding Service status must be verified, in case of
two-legged authentication. If three-legged authentication is used the phone
number is instead detected, by the API Producer, from the access token.
Before starting to use the Call Forwarding API, the developer needs to know
about the below specified details:
**phoneNumber**
This is the end user phone number. The Call Forwarding Signal API verifies
if a call forwarding
service is active on this phone number. Note: this parameter must be
must be provided/valued only in case of two-legged authentication.
In case of three-legged authentication the phone number is retrieved by
the access token.
**CreateCallForwardingSignal**
This is the resource the API Consumer uses to define the phone number to
be verified about the status of the Network Call Forwarding service.
**UnconditionalCallForwardingSignal**
This is the resource the API Consumer gets back, containing the information
about the Unconditional Call Forwarding Service status for the given phone
number (PhoneNumber).
**CallForwardingSignal**
This is the resource the API Consumer gets back, containing the information
about the general status of the Network Call Forwarding service for the
specified phone number.
The Call Forwarding Signal API provides two endpoints fulfilling the
following intents:
- **unconditional-call-forwardings**: Is the unconditional call fwd service
active on a specific phone number?
- **call-forwardings**: Which is the status of the call forwarding for a
specific phone number?
# API Documentation
## Details
The Call Forwarding Signal API is invoked by an API Consumer after the
Consent Management flow.
The API Consumer can request the API Producer for the status of the
Unconditional Call Forwarding service using the
unconditional-call-forwardings POST method. A boolean, with the information
about the activation status of the call forwarding service, will be
provided back via the UnconditionalCallForwardingSignal resource.
The API Consumer can also request the API Producer for the generic status of
the Call Forwarding service using the call-forwardings POST method. An array
of strings with the information of the type of active call forwarding
services will be provided back via the CallForwardingSignal resource.
# Authorization and authentication
The "Camara Security and Interoperability Profile" provides details of how
an API consumer requests an access token. Please refer to Identity and
Consent Management
(https://github.com/camaraproject/IdentityAndConsentManagement/)
for the released version of the profile.
The specific authorization flows to be used will be agreed upon during the
onboarding process, happening between the API consumer and the API
provider, taking into account the declared purpose for accessing the API,
whilst also being subject to the prevailing legal framework dictated by
local legislation.
In cases where personal data is processed by the API and users can
exercise their rights through mechanisms such as opt-in and/or opt-out,
the use of three-legged access tokens is mandatory. This ensures that
the API remains in compliance with privacy regulations, upholding the
principles of transparency and user-centric privacy-by-design.
# Identifying the phone number from the access token
This API requires the API consumer to identify a phone number as the
subject of the API as follows:
- When the API is invoked using a two-legged access token, the subject
will be identified from the optional `phoneNumber` object field, which
therefore MUST be provided.
- When a three-legged access token is used however, this optional
identifier MUST NOT be provided, as the subject will be uniquely
identified from the access token.
This approach simplifies API usage for API consumers using a
three-legged access token to invoke the API by relying on the
information that is associated with the access token and was
identified during the authentication process.
## Error handling:
- If the subject cannot be identified from the access token and the
optional `phoneNumber` object field is not included in the request, then
the server will return an error with the
`422 MISSING_IDENTIFIER` error code.
- If the subject can be identified from the access token and the
optional `phoneNumber` object field is also included in the request, then
the server will return an error with the `422 UNNECESSARY_IDENTIFIER`
error code. This will be the case even if the same device is
identified by these two methods, as the server is unable to make
this comparison.
# Additional CAMARA error responses
The list of error codes in this API specification is not exhaustive.
Therefore the API specification may not document some non-mandatory error
statuses as indicated in `CAMARA API Design Guide`.
Please refer to the `CAMARA_common.yaml` of the Commonalities Release
associated to this API version for a complete list of error responses.
The applicable Commonalities Release can be identified in the
`API Readiness Checklist` document associated to this API version.
As a specific rule, error `501 - NOT_IMPLEMENTED` can be only a possible
error response if it is explicitly documented in the API.
# FAQ''s
(FAQs will be added in a later version of the documentation)
'
version: wip
license:
name: Apache 2.0
url: https://www.apache.org/licenses/LICENSE-2.0.html
x-camara-commonalities: 0.6
servers:
- url: '{apiRoot}/call-forwarding-signal/vwip'
variables:
apiRoot:
default: http://localhost:9091
description: API root, defined by the service provider, e.g. `api.example.com` or `api.example.com/somepath`
tags:
- name: Roaming status retrieval
description: Operation to get device roaming status and country information (if roaming) synchronously
paths:
/retrieve:
post:
tags:
- Roaming status retrieval
summary: Get the current roaming status and the country information
description: Get the current roaming status and the country information
operationId: getRoamingStatus
parameters:
- $ref: '#/components/parameters/x-correlator'
security:
- openId:
- device-roaming-status:read
requestBody:
content:
application/json:
schema:
$ref: '#/components/schemas/RoamingStatusRequest'
required: true
responses:
'200':
description: Contains information about current roaming status
headers:
x-correlator:
$ref: '#/components/headers/x-correlator'
content:
application/json:
schema:
$ref: '#/components/schemas/RoamingStatusResponse'
examples:
No-Country-Name:
value:
lastStatusTime: '2024-02-20T10:41:38.657Z'
roaming: true
countryCode: 901
countryName: []
Single-Country-Code:
value:
lastStatusTime: '2024-02-20T10:41:38.657Z'
roaming: true
countryCode: 262
countryName:
- DE
Multiple-Country-Codes:
value:
lastStatusTime: '2024-02-20T10:41:38.657Z'
roaming: true
countryCode: 340
countryName:
- BL
- GF
- GP
- MF
- MQ
'400':
$ref: '#/components/responses/Generic400'
'401':
$ref: '#/components/responses/Generic401'
'403':
$ref: '#/components/responses/Generic403'
'404':
$ref: '#/components/responses/Generic404'
'422':
$ref: '#/components/responses/Generic422'
'429':
$ref: '#/components/responses/Generic429'
'503':
$ref: '#/components/responses/Generic503'
components:
schemas:
ActiveRoaming:
description: Roaming status. True, if it is roaming
type: boolean
LastStatusTime:
description: Last time that the associated device roaming status was updated
type: string
format: date-time
example: '2024-02-20T10:41:38.657Z'
CountryCode:
description: The Mobile country code (MCC) as an geographic region identifier for the country and the dependent areas.
type: integer
SingleIpv4Addr:
description: A single IPv4 address with no subnet mask
type: string
format: ipv4
example: 84.125.93.10
RoamingStatusResponse:
type: object
required:
- roaming
properties:
lastStatusTime:
$ref: '#/components/schemas/LastStatusTime'
roaming:
$ref: '#/components/schemas/ActiveRoaming'
countryCode:
$ref: '#/components/schemas/CountryCode'
countryName:
$ref: '#/components/schemas/CountryName'
PhoneNumber:
description: A public identifier addressing a telephone subscription. In mobile networks it corresponds to the MSISDN (Mobile Station International Subscriber Directory Number). In order to be globally unique it has to be formatted in international format, according to E.164 standard, prefixed with '+'.
type: string
pattern: ^\+[1-9][0-9]{4,14}$
example: '+123456789'
DeviceIpv4Addr:
type: object
description: 'The device should be identified by either the public (observed) IP address and port as seen by the application server, or the private (local) and any public (observed) IP addresses in use by the device (this information can be obtained by various means, for example from some DNS servers).
If the allocated and observed IP addresses are the same (i.e. NAT is not in use) then the same address should be specified for both publicAddress and privateAddress.
If NAT64 is in use, the device should be identified by its publicAddress and publicPort, or separately by its allocated IPv6 address (field ipv6Address of the Device object)
In all cases, publicAddress must be specified, along with at least one of either privateAddress or publicPort, dependent upon which is known. In general, mobile devices cannot be identified by their public IPv4 address alone.
'
properties:
publicAddress:
$ref: '#/components/schemas/SingleIpv4Addr'
privateAddress:
$ref: '#/components/schemas/SingleIpv4Addr'
publicPort:
$ref: '#/components/schemas/Port'
anyOf:
- required:
- publicAddress
- privateAddress
- required:
- publicAddress
- publicPort
example:
publicAddress: 84.125.93.10
publicPort: 59765
ErrorInfo:
description: The error object used for error-cases.
type: object
required:
- status
- code
- message
properties:
status:
type: integer
description: HTTP response status code
code:
type: string
description: Code given to this error
message:
type: string
description: Detailed error description
DeviceIpv6Address:
description: 'The device should be identified by the observed IPv6 address, or by any single IPv6 address from within the subnet allocated to the device (e.g. adding ::0 to the /64 prefix).
'
type: string
format: ipv6
example: 2001:db8:85a3:8d3:1319:8a2e:370:7344
RoamingStatusRequest:
description: The request for retrieving the current roaming status for the requested device.
type: object
properties:
device:
$ref: '#/components/schemas/Device'
CountryName:
description: The ISO 3166 ALPHA-2 country-codes of mapped to mobile country code(MCC). If there is mapping of one MCC to multiple countries, then we have list of countries. If there is no mapping of MCC to any country, then an empty array [] shall be returned..
type: array
items:
type: string
Port:
description: TCP or UDP port number
type: integer
minimum: 0
maximum: 65535
Device:
description: 'End-user equipment able to connect to a mobile network. Examples of devices include smartphones or IoT sensors/actuators.
The developer can choose to provide the below specified device identifiers:
* `ipv4Address`
* `ipv6Address`
* `phoneNumber`
* `networkAccessIdentifier`
NOTE: the MNO might support only a subset of these options. The API invoker can provide multiple identifiers to be compatible across different MNOs. In this case the identifiers MUST belong to the same device.
'
type: object
properties:
phoneNumber:
$ref: '#/components/schemas/PhoneNumber'
networkAccessIdentifier:
$ref: '#/components/schemas/NetworkAccessIdentifier'
ipv4Address:
$ref: '#/components/schemas/DeviceIpv4Addr'
ipv6Address:
$ref: '#/components/schemas/DeviceIpv6Address'
minProperties: 1
NetworkAccessIdentifier:
description: A public identifier addressing a subscription in a mobile network. In 3GPP terminology, it corresponds to the GPSI formatted with the External Identifier ({Local Identifier}@{Domain Identifier}). Unlike the telephone number, the network access identifier is not subjected to portability ruling in force, and is individually managed by each operator.
type: string
example: 123456789@domain.com
responses:
Generic503:
description: Service Unavailable
headers:
x-correlator:
$ref: '#/components/headers/x-correlator'
content:
application/json:
schema:
allOf:
- $ref: '#/components/schemas/ErrorInfo'
- type: object
properties:
status:
enum:
- 503
code:
enum:
- UNAVAILABLE
examples:
GENERIC_503_UNAVAILABLE:
description: Service is not available. Temporary situation usually related to maintenance process in the server side
value:
status: 503
code: UNAVAILABLE
message: Network issue
Generic422:
description: Unprocessable Content
headers:
x-correlator:
$ref: '#/components/headers/x-correlator'
content:
application/json:
schema:
allOf:
- $ref: '#/components/schemas/ErrorInfo'
- type: object
properties:
status:
enum:
- 422
code:
enum:
- IDENTIFIER_MISMATCH
- SERVICE_NOT_APPLICABLE
- MISSING_IDENTIFIER
- UNSUPPORTED_IDENTIFIER
- UNNECESSARY_IDENTIFIER
examples:
GENERIC_422_IDENTIFIER_MISMATCH:
description: Inconsistency between identifiers not pointing to the same device
value:
status: 422
code: IDENTIFIER_MISMATCH
message: Provided identifiers are not consistent.
GENERIC_422_SERVICE_NOT_APPLICABLE:
description: Service not applicable for the provided identifier
value:
status: 422
code: SERVICE_NOT_APPLICABLE
message: The service is not available for the provided identifier.
GENERIC_422_MISSING_IDENTIFIER:
description: An identifier is not included in the request and the device or phone number identification cannot be derived from the 3-legged access token
value:
status: 422
code: MISSING_IDENTIFIER
message: The device cannot be identified.
GENERIC_422_UNSUPPORTED_IDENTIFIER:
description: None of the provided identifiers is supported by the implementation
value:
status: 422
code: UNSUPPORTED_IDENTIFIER
message: The identifier provided is not supported.
GENERIC_422_UNNECESSARY_IDENTIFIER:
description: An explicit identifier is provided when a device or phone number has already been identified from the access token
value:
status: 422
code: UNNECESSARY_IDENTIFIER
message: The device is already identified by the access token.
Generic429:
description: Too Many Requests
headers:
x-correlator:
$ref: '#/components/headers/x-correlator'
content:
application/json:
schema:
allOf:
- $ref: '#/components/schemas/ErrorInfo'
- type: object
properties:
status:
enum:
- 429
code:
enum:
- QUOTA_EXCEEDED
- TOO_MANY_REQUESTS
examples:
GENERIC_429_QUOTA_EXCEEDED:
description: Request is rejected due to exceeding a business quota limit
value:
status: 429
code: QUOTA_EXCEEDED
message: Out of resource quota.
GENERIC_429_TOO_MANY_REQUESTS:
description: Access to the API has been temporarily blocked due to rate or spike arrest limits being reached
value:
status: 429
code: TOO_MANY_REQUESTS
message: Rate limit reached.
Generic400:
description: Bad Request
headers:
x-correlator:
$ref: '#/components/headers/x-correlator'
content:
application/json:
schema:
allOf:
- $ref: '#/components/schemas/ErrorInfo'
- type: object
properties:
status:
enum:
- 400
code:
enum:
- INVALID_ARGUMENT
examples:
GENERIC_400_INVALID_ARGUMENT:
description: Invalid Argument. Generic Syntax Exception
value:
status: 400
code: INVALID_ARGUMENT
message: Client specified an invalid argument, request body or query param.
Generic401:
description: Unauthorized
headers:
x-correlator:
$ref: '#/components/headers/x-correlator'
content:
application/json:
schema:
allOf:
- $ref: '#/components/schemas/ErrorInfo'
- type: object
properties:
status:
enum:
- 401
code:
enum:
- UNAUTHENTICATED
- AUTHENTICATION_REQUIRED
examples:
GENERIC_401_UNAUTHENTICATED:
description: Request cannot be authenticated
value:
status: 401
code: UNAUTHENTICATED
message: Request not authenticated due to missing, invalid, or expired credentials.
GENERIC_401_AUTHENTICATION_REQUIRED:
description: New authentication is needed, authentication is no longer valid
value:
status: 401
code: AUTHENTICATION_REQUIRED
message: New authentication is required.
Generic403:
description: Forbidden
headers:
x-correlator:
$ref: '#/components/headers/x-correlator'
content:
application/json:
schema:
allOf:
- $ref: '#/components/schemas/ErrorInfo'
- type: object
properties:
status:
enum:
- 403
code:
enum:
- PERMISSION_DENIED
examples:
GENERIC_403_PERMISSION_DENIED:
description: Permission denied. OAuth2 token access does not have the required scope or when the user fails operational security
value:
status: 403
code: PERMISSION_DENIED
message: Client does not have sufficient permissions to perform this action.
Generic404:
description: Not found
headers:
x-correlator:
$ref: '#/components/headers/x-correlator'
content:
application/json:
schema:
allOf:
- $ref: '#/components/schemas/ErrorInfo'
- type: object
properties:
status:
enum:
- 404
code:
enum:
- NOT_FOUND
- IDENTIFIER_NOT_FOUND
examples:
GENERIC_404_NOT_FOUND:
description: Resource is not found
value:
status: 404
code: NOT_FOUND
message: The specified resource is not found.
GENERIC_404_IDENTIFIER_NOT_FOUND:
description: The phone number is not associated with a CSP customer account
value:
status: 404
code: IDENTIFIER_NOT_FOUND
message: The phone number provided is not associated with a customer account
parameters:
x-correlator:
name: x-correlator
in: header
description: Correlation id for the different services
schema:
type: string
pattern: ^[a-zA-Z0-9-]{0,55}$
example: b4333c46-49c0-4f62-80d7-f0ef930f1c46
headers:
x-correlator:
description: Correlation id for the different services
schema:
type: string
pattern: ^[a-zA-Z0-9-]{0,55}$
example: b4333c46-49c0-4f62-80d7-f0ef930f1c46
securitySchemes:
openId:
description: to support Consent Management
type: openIdConnect
openIdConnectUrl: https://example.com/.well-known/openid-configuration
externalDocs:
description: Product documentation at CAMARA
url: https://github.com/camaraproject/CallForwardingSignal